SWI-CAN2 Help?!

mrwink2006 · 09-04-2009, 11:12 AM

Has anyone actually installed this and got it to work? I put it in yesterday, wired it to the CAN+ and CAN-...and all the wires it says to hook up. Got the LED on the SWI-JACK to light up...but when I go through the programming for the SWC, nothing. The LED goes out but doesn't come back on until 7 secs and it says it's done programming, but nothing is programmed.

Please help....I searched the forums, but no one has and actual install on it. Maybe something is wrong in the directions? It's getting hooked up to a JVC AVX77, which is already installed and fully functional....I just want the SWC too, I'm greedy.

mrwink2006 · 09-08-2009, 12:59 PM

ANYONE!?!

mrwink2006 · 09-14-2009, 10:25 PM

Bueller?? Bueller??

mrwink2006 · 09-16-2009, 10:25 AM

Yes, but I got that from the stereo wire harness.

srcstc · 09-16-2009, 11:18 AM

You can't get a true constant from the stereo wiring harness. You need to pull it from the battery. So any programming you do is getting wiped clean every time you turn off the car.

mrwink2006 · 09-16-2009, 02:32 PM

Quote:

Originally Posted by srcstc

You can't get a true constant from the stereo wiring harness. You need to pull it from the battery. So any programming you do is getting wiped clean every time you turn off the car.

Then how is my stereo not resetting everytime I turn the car off. It is currently wired to the Constant wire coming through the stereo harness.

Unfortunately I'm not sure you know what you're talking about, but thanks for trying to help.

mrwink2006 · 09-16-2009, 06:39 PM

Quote:

Originally Posted by srcstc

There's no need to be a jerk. You're the one with the problem that prolly has a simple solution.
Turn your car off, lock it, and wait a couple hours. It should reset all your presets.

The Stereo works fine and I wasn't being a Jerk....

I've had the stereo installed for 2 weeks now. I'm not having a problem with the stereo...it functions and retains all presets just fine. I'm having a problem with the SWI-Jack not receiving the signal from the Steering Wheel.

HighVoltage · 09-17-2009, 11:22 AM

You keep mentioning the SWI-JACK but not the SWI-CAN2. You have both correct? If so, are you sure dont have the CANbus wires mixed up? The rotary switch is set to 0?

mrwink2006 · 09-17-2009, 11:39 AM

Quote:

Originally Posted by HighVoltage

You keep mentioning the SWI-JACK but not the SWI-CAN2. You have both correct? If so, are you sure dont have the CANbus wires mixed up? The rotary switch is set to 0?

Sorry, yes I have both. I'm pretty sure the wires are hooked up correctly. I have had time this week to open the dash back up and switch the wires around. It could just be that. And yea...the rotary switch is at 0. I'm probably going to dive back into it this weekend. I might just wait however until I can order the Spec Dock from 2point5 and install that at the same time...then I could just wire that to the stereo too.

Thanks...

mrwink2006 · 10-12-2009, 07:48 AM

EUREKA!!!! Problem solved!! I had the CAN wires switched...The diagram they send you is wrong. I switched them around around and presto...steering wheel controls are programed!!

09-04-2009, 11:12 AM	#1
mrwink2006 Enlisted Member 3 Rep 31 Posts Drives: 2006 Apline White 325i Sedan Join Date: Aug 2009 Location: Abilene, TX iTrader: (0)	SWI-CAN2 Help?! Has anyone actually installed this and got it to work? I put it in yesterday, wired it to the CAN+ and CAN-...and all the wires it says to hook up. Got the LED on the SWI-JACK to light up...but when I go through the programming for the SWC, nothing. The LED goes out but doesn't come back on until 7 secs and it says it's done programming, but nothing is programmed. Please help....I searched the forums, but no one has and actual install on it. Maybe something is wrong in the directions? It's getting hooked up to a JVC AVX77, which is already installed and fully functional....I just want the SWC too, I'm greedy.
	Appreciate 0 Tweet Quote

09-08-2009, 12:59 PM	#2
mrwink2006 Enlisted Member 3 Rep 31 Posts Drives: 2006 Apline White 325i Sedan Join Date: Aug 2009 Location: Abilene, TX iTrader: (0)	ANYONE!?!
	Appreciate 0 Quote

09-14-2009, 10:25 PM	#3
mrwink2006 Enlisted Member 3 Rep 31 Posts Drives: 2006 Apline White 325i Sedan Join Date: Aug 2009 Location: Abilene, TX iTrader: (0)	Bueller?? Bueller??
	Appreciate 0 Quote

09-16-2009, 10:25 AM	#4
mrwink2006 Enlisted Member 3 Rep 31 Posts Drives: 2006 Apline White 325i Sedan Join Date: Aug 2009 Location: Abilene, TX iTrader: (0)	Yes, but I got that from the stereo wire harness.
	Appreciate 0 Quote

09-16-2009, 11:18 AM	#5
srcstc Major 88 Rep 1,365 Posts Drives: 2016 Camaro 2SS Join Date: Sep 2006 Location: NJ iTrader: (9)	You can't get a true constant from the stereo wiring harness. You need to pull it from the battery. So any programming you do is getting wiped clean every time you turn off the car.
	Appreciate 0 Quote

09-17-2009, 11:22 AM	#8
HighVoltage . 42 Rep 867 Posts Drives: 07 E90 335i Join Date: Aug 2008 Location: . iTrader: (0)	You keep mentioning the SWI-JACK but not the SWI-CAN2. You have both correct? If so, are you sure dont have the CANbus wires mixed up? The rotary switch is set to 0? __________________ Not only will it kill you it will hurt the whole time while you're dying. http://www.stevesnovasite.com/ http://www.jalopyjournal.com/forum/ http://www.garagejournal.com/
	Appreciate 0 Quote

10-12-2009, 07:48 AM	#10
mrwink2006 Enlisted Member 3 Rep 31 Posts Drives: 2006 Apline White 325i Sedan Join Date: Aug 2009 Location: Abilene, TX iTrader: (0)	EUREKA!!!! Problem solved!! I had the CAN wires switched...The diagram they send you is wrong. I switched them around around and presto...steering wheel controls are programed!!
	Appreciate 0 Quote