PRE LCI Halogen to Euro LCI Xenon

MurderdOut.com · 11-01-2009, 10:17 AM

<<<<TOP SECRET>>>>

Lets just say there is a lot of stuff to do and i am not at liberty to share this information just yet...

the set up being ran in this diagram is a Halogen to Xenon Upgrade...

equipment installed - Euro LCI Xenons (LED Turn Signals), HID Lows with functional shutter for high beams, HID halos with error free harness and HID Fogs...

enjoy the blur

11-01-2009, 05:18 PM

lol

Bora20 · 11-01-2009, 07:56 PM

I just want to know how to wire my halogen high beams so that they come on with the HID shutter. They do this in Europe, so it should be an easy change.

Scottycs · 11-01-2009, 08:29 PM

connect the wires inside the housing. Pretty easy. The blue high beam wire to the red wire going into the shutter.

Bora20 · 11-01-2009, 08:32 PM

The only other issue I have with this Chris is that I have DRL. I have have to test this out, I was going to pull the wires out of the main connector to put it all back like stock if it doesn't work.

Thanks.

Scottycs · 11-01-2009, 08:37 PM

Hmm. don't know what to tell you. I had DRL and I went into the Idrive settings and unchecked it. I don't know how to disable on non-idrive cars. I am still new the e90, so I am still learning as well.

crazed792 · 11-01-2009, 08:50 PM

Quote:

Originally Posted by Scottycs

Hmm. don't know what to tell you. I had DRL and I went into the Idrive settings and unchecked it. I don't know how to disable on non-idrive cars. I am still new the e90, so I am still learning as well.

It's simple to do without iDrive, but you can't do it in Canadian spec models.

11-01-2009, 10:17 AM	#1
MurderdOut.com Banned 4 Rep 72 Posts Drives: Murderd Out Join Date: Oct 2009 Location: East Coast iTrader: (0)	PRE LCI Halogen to Euro LCI Xenon <<<<TOP SECRET>>>> Lets just say there is a lot of stuff to do and i am not at liberty to share this information just yet... the set up being ran in this diagram is a Halogen to Xenon Upgrade... equipment installed - Euro LCI Xenons (LED Turn Signals), HID Lows with functional shutter for high beams, HID halos with error free harness and HID Fogs... enjoy the blur Attached Images
	Appreciate 0 Tweet Quote

11-01-2009, 05:18 PM	#2
RemovedUser Guest 0 Rep n/a Posts Drives:	lol
	Appreciate 0 Quote

11-01-2009, 07:56 PM	#3
Bora20 Lieutenant 17 Rep 464 Posts Drives: 2007 BMW X3 3.0si M-Sport Join Date: May 2006 Location: Kamloops, BC, CAD iTrader: (0)	I just want to know how to wire my halogen high beams so that they come on with the HID shutter. They do this in Europe, so it should be an easy change. __________________ 2007 BMW X3 3.0si Titanium SilverBlack LeatherAutoPremiumM SportComfortActivityAssist & Bluetooth*
	Appreciate 0 Quote

11-01-2009, 08:29 PM	#4
Scottycs Banned 58 Rep 591 Posts Drives: 09 335i Join Date: Oct 2009 Location: Raleigh, NC iTrader: (6)	connect the wires inside the housing. Pretty easy. The blue high beam wire to the red wire going into the shutter.
	Appreciate 0 Quote

11-01-2009, 08:32 PM	#5
Bora20 Lieutenant 17 Rep 464 Posts Drives: 2007 BMW X3 3.0si M-Sport Join Date: May 2006 Location: Kamloops, BC, CAD iTrader: (0)	The only other issue I have with this Chris is that I have DRL. I have have to test this out, I was going to pull the wires out of the main connector to put it all back like stock if it doesn't work. Thanks. __________________ 2007 BMW X3 3.0si Titanium SilverBlack LeatherAutoPremiumM SportComfortActivityAssist & Bluetooth*
	Appreciate 0 Quote

11-01-2009, 08:37 PM	#6
Scottycs Banned 58 Rep 591 Posts Drives: 09 335i Join Date: Oct 2009 Location: Raleigh, NC iTrader: (6)	Hmm. don't know what to tell you. I had DRL and I went into the Idrive settings and unchecked it. I don't know how to disable on non-idrive cars. I am still new the e90, so I am still learning as well.
	Appreciate 0 Quote