Any idea which JB3 I'm running?

caliguy562 · 11-08-2009, 01:18 PM

So after uninstalling for some work at the dealership, I became curious and opened the JB3. I ordered it late May and it is in the Gen3 housing. However, the chip has 1.2B written on it. So, right off the bat I'm assuming I don't have 1.3 which I thought it came with. Also, does anyone have the map chart for 1.2B? thanks in advance.

enrita · 11-08-2009, 01:46 PM

You should order a new chip from burgertuning.com which comes now with the official 1.4 map. You are running a quite old map. Check out n54tech forum for info on jb3.

ianthegreat · 11-08-2009, 02:09 PM

+1

the new 1.4 is sooooo smooth, the shifts are x3 over stock

HPFREAK · 11-08-2009, 05:57 PM

You dont have 8.4 or 8.5 for sure but you can get those no problem. If it is a Gen 3 board it should have serial ports at both ends of the box. You may still have 1.3 but if you do not have a chip burner just order a new chip and swap it in.

Mike@N54Tuning.com · 11-08-2009, 06:24 PM

Quote:

Originally Posted by caliguy562

So after uninstalling for some work at the dealership, I became curious and opened the JB3. I ordered it late May and it is in the Gen3 housing. However, the chip has 1.2B written on it. So, right off the bat I'm assuming I don't have 1.3 which I thought it came with. Also, does anyone have the map chart for 1.2B? thanks in advance.

I answered your post in the other thread. You have a gen-3 board. Just order the 1.4 chip of my site and you will be fully up to date

1.4 will be a big change from 1.2

Mike

caliguy562 · 11-08-2009, 06:33 PM

Yeah, I just saw and replied. Thanks everyone. And here I thought my car was doing big things with the software I was running. Can't wait to try 1.4.

11-08-2009, 01:18 PM	#1
caliguy562 Lieutenant 8 Rep 476 Posts Drives: E92 335i Join Date: Dec 2007 Location: garaged somewhere in soCal iTrader: (3)	Any idea which JB3 I'm running? So after uninstalling for some work at the dealership, I became curious and opened the JB3. I ordered it late May and it is in the Gen3 housing. However, the chip has 1.2B written on it. So, right off the bat I'm assuming I don't have 1.3 which I thought it came with. Also, does anyone have the map chart for 1.2B? thanks in advance.
	Appreciate 0 Tweet Quote

11-08-2009, 01:46 PM	#2
enrita Major General 161 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	You should order a new chip from burgertuning.com which comes now with the official 1.4 map. You are running a quite old map. Check out n54tech forum for info on jb3. __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

11-08-2009, 02:09 PM	#3
ianthegreat Colonel 63 Rep 2,314 Posts Drives: n54 Join Date: Apr 2008 Location: Pittsburgh/Houston iTrader: (1)	+1 the new 1.4 is sooooo smooth, the shifts are x3 over stock
	Appreciate 0 Quote

11-08-2009, 05:57 PM	#4
HPFREAK Lieutenant Colonel 66 Rep 1,884 Posts Drives: C6 ZO6 Join Date: Sep 2009 Location: Socal iTrader: (8)	You dont have 8.4 or 8.5 for sure but you can get those no problem. If it is a Gen 3 board it should have serial ports at both ends of the box. You may still have 1.3 but if you do not have a chip burner just order a new chip and swap it in. __________________ My Youtube Channel
	Appreciate 0 Quote

11-08-2009, 06:33 PM	#6
caliguy562 Lieutenant 8 Rep 476 Posts Drives: E92 335i Join Date: Dec 2007 Location: garaged somewhere in soCal iTrader: (3)	Yeah, I just saw and replied. Thanks everyone. And here I thought my car was doing big things with the software I was running. Can't wait to try 1.4.
	Appreciate 0 Quote