[black335xi]

i have 8k foglights with lux H8 angel eyes and 8k D1s bulbs but the D1s are not mtec like the foglights do you think that the color will be off because of this becuase the foglights are slightly darker than the headlights

[Mike@F1 Autohaüs]

What brand of bulbs are you using for the low beam and fogs?

With an open housing (fogs), the HID color will always be more pronounced.

[black335xi]

High Performance Xenon D1S HID replacement bulbs and mtec fogslights with Lux h8 many people tell me that the white breaks up everything nice but i am not sure what to do because i have 6K foglights as well that i changed to put in 8k but are laying around

[JayKay335i]

No lens = different dispersion.

[Mike@F1 Autohaüs]

Originally Posted by black335xi

High Performance Xenon D1S HID replacement bulbs and mtec fogslights with Lux h8 many people tell me that the white breaks up everything nice but i am not sure what to do because i have 6K foglights as well that i changed to put in 8k but are laying around

Actual color will vary from different manufacturers.

What your plans are will vary on the look that you're aiming for.

[iheartsole]

should get mtec d1S bulbs

[Mike@F1 Autohaüs]

It's probably best if you go with the same brand of bulb for the low beam and fogs for a closer, better match.

[E92-Lighting]

Originally Posted by iheartsole

should get mtec d1S bulbs

you should probably get the same brand so everything will match perfectly

[SV Concepts III]

The color does vary between manufacturers so I suggest sticking with the same manufacturer to ensure a match.

[black335xi]

i will post a pic of my setup the color difference is not that different and D1s bulbs were a pain to install