how much power if......

jake89714 · 02-02-2010, 12:41 PM

If I add down pipes, intake, jb3.. how much power you think i'm at?

jpsimon · 02-02-2010, 12:44 PM

one hundred billion hp

but for real, you aren't going to get any kind of solid answer. It all depends on what dyno you go to (do you have a baseline?), what octane, what map, what conditions etc... etc etc

Sniz · 02-02-2010, 12:55 PM

what gas what psi do you want to push your snails to?

jake89714 · 02-02-2010, 01:11 PM

not sure about psi.. 93 octane

kjrulz · 02-02-2010, 01:12 PM

350hp

huyner328 · 02-02-2010, 01:21 PM

Time for some research my dear Watson.

enrita · 02-02-2010, 01:28 PM

yes i really dont understand this threads... there are zillions of dynos with description of mods.

vegasspeed · 02-02-2010, 01:38 PM

Seriously? Nobody knows but don't be concerned about a paper number. It is the improvement on hp and tq that matter. Do you have a baseline dyno? No? Well, than you need that first.

Jonny550 · 02-02-2010, 01:41 PM

your looking at about 370-390 rwhp on 93 pump and about 400 whp with Map7 on race gas.

Sniz · 02-02-2010, 01:42 PM

Quote:

Originally Posted by Jon335iFL

your looking at about 370-390 rwhp on 93 pump and about 400 whp with Map7 on race gas.

you think he'll hit 390whp on pump w just downpipes and dual cones? that would be nice!

Jonny550 · 02-02-2010, 01:45 PM

Quote:

Originally Posted by Sniz

you think he'll hit 390whp on pump w just downpipes and dual cones? that would be nice!

Didnt he mention JB3 or no?

if no jb3 then heall be lucky to see 330 whp

Sniz · 02-02-2010, 02:10 PM

Quote:

Originally Posted by Jon335iFL

Didnt he mention JB3 or no?

if no jb3 then heall be lucky to see 330 whp

no he did mention JB3

also there is no way he'll see 330whp w/ out a tune. He wont see 300whp w/ out a tune.

enrita · 02-02-2010, 03:10 PM

Exactly i dynoed w/o tune 24 whp over stock with all possible bolt ons.

WCM3 · 02-02-2010, 04:23 PM

Quote:

Originally Posted by kjrulz

350hp

+1..350rwhp..

HPFREAK · 02-02-2010, 04:24 PM

With 93 On map 5 you could hit 350+, and map 7 should get you 370+. I know there are several dynos posted on here you can search though. Although if you plan on going that aggressive I say you need an FMIC as well.

Bimmer This · 02-02-2010, 05:38 PM

Quote:

Originally Posted by jpsimon

one hundred billion hp

but for real, you aren't going to get any kind of solid answer. It all depends on what dyno you go to (do you have a baseline?), what octane, what map, what conditions etc... etc etc

that's a good one! Funniest comment I've seen all day!

alpinedevil335 · 02-02-2010, 05:40 PM

check my sig

Sniz · 02-02-2010, 06:00 PM

Quote:

Originally Posted by alpinedevil335

check my sig

how did u trap 112mph w 400whp? no traction until the 1/8th?

I would think you should be trapping several mph higher than that.....no?

SIEN · 02-02-2010, 06:02 PM

Here's a dyno with the same mods done by BMS. It was with high flow (catted) downpipes, BMS intake and JB3.

(Think it was using map 7)

ETA: Also with 93Oct

alpinedevil335 · 02-02-2010, 06:09 PM

Quote:

Originally Posted by Sniz

how did u trap 112mph w 400whp? no traction until the 1/8th?

I would think you should be trapping several mph higher than that.....no?

RFT's

HPFREAK · 02-02-2010, 06:16 PM

Quote:

Originally Posted by alpinedevil335

RFT's

Still a good ET considering crap tires. have you done any roll races with new M3's, vettes, or AMG's? If so how did you do? I ran a 650i vert a few weeks ago from about 20mph and ran away from him pretty easy on map 3.

alpinedevil335 · 02-02-2010, 06:43 PM

Quote:

Originally Posted by Brad@PSI MOTORS

Still a good ET considering crap tires. have you done any roll races with new M3's, vettes, or AMG's? If so how did you do? I ran a 650i vert a few weeks ago from about 20mph and ran away from him pretty easy on map 3.

Thanks,
I haven't done any roll races. Mostly from a dig. newer 550, M3's, and M5's. fairly easy kills . i drive map 7 daily in cool weather.

02-02-2010, 12:41 PM	#1
jake89714 First Lieutenant 53 Rep 393 Posts Drives: 2007 335i coupe Join Date: Sep 2009 Location: NOrthern VA iTrader: (1)	how much power if...... If I add down pipes, intake, jb3.. how much power you think i'm at?
	Appreciate 0 Tweet Quote

02-02-2010, 12:44 PM	#2
jpsimon Team Zissou 3163 Rep 10,200 Posts Drives: 2022 AWD M3 Comp - SMB Join Date: Dec 2006 Location: CT iTrader: (7)	one hundred billion hp but for real, you aren't going to get any kind of solid answer. It all depends on what dyno you go to (do you have a baseline?), what octane, what map, what conditions etc... etc etc Last edited by jpsimon; 02-02-2010 at 01:06 PM..
	Appreciate 0 Quote

02-02-2010, 12:55 PM	#3
Sniz Lieutenant General 682 Rep 10,584 Posts Drives: e92 335 - gone // e36 M3 turbo Join Date: Mar 2007 Location: Ellicott City, MD iTrader: (1)	what gas what psi do you want to push your snails to? __________________
	Appreciate 0 Quote

02-02-2010, 01:11 PM	#4
jake89714 First Lieutenant 53 Rep 393 Posts Drives: 2007 335i coupe Join Date: Sep 2009 Location: NOrthern VA iTrader: (1)	not sure about psi.. 93 octane
	Appreciate 0 Quote

02-02-2010, 01:12 PM	#5
kjrulz Mastermind 71 Rep 1,360 Posts Drives: girls krazy Join Date: Jan 2009 Location: your mother iTrader: (5)	350hp
	Appreciate 0 Quote

02-02-2010, 01:21 PM	#6
huyner328 Former N54 Fanatic 84 Rep 1,927 Posts Drives: Slow Join Date: Nov 2009 Location: NoVA iTrader: (8) Garage List 2014 Range Rover Sp ... [10.00] 2012 Fiat Abarth [10.00]	Time for some research my dear Watson. __________________ FREE MIXES! https://soundcloud.com/djbradpiff
	Appreciate 0 Quote

02-02-2010, 01:28 PM	#7
enrita Major General 161 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	yes i really dont understand this threads... there are zillions of dynos with description of mods. __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

02-02-2010, 01:38 PM	#8
vegasspeed Captain 84 Rep 761 Posts Drives: 335i 6MT coupe Montego Blue Join Date: Apr 2008 Location: Las Vegas iTrader: (1)	Seriously? Nobody knows but don't be concerned about a paper number. It is the improvement on hp and tq that matter. Do you have a baseline dyno? No? Well, than you need that first. __________________ 335i coupe Montego Blue Dinan stage 3 tune, Advan RS wheels 350whp/365wtq 1994 Brooklands Green Acura NSX Comptech Supercharged 390whp/300wtq
	Appreciate 0 Quote

02-02-2010, 01:41 PM	#9
Jonny550 Brigadier General 263 Rep 4,936 Posts Drives: 2012 550i Xdrive Join Date: Feb 2009 Location: Jersey Shore iTrader: (14)	your looking at about 370-390 rwhp on 93 pump and about 400 whp with Map7 on race gas. __________________ [SIGPIC][/SIGPIC] .
	Appreciate 0 Quote

02-02-2010, 03:10 PM	#13
enrita Major General 161 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	Exactly i dynoed w/o tune 24 whp over stock with all possible bolt ons. __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

02-02-2010, 04:24 PM	#15
HPFREAK Lieutenant Colonel 66 Rep 1,884 Posts Drives: C6 ZO6 Join Date: Sep 2009 Location: Socal iTrader: (8)	With 93 On map 5 you could hit 350+, and map 7 should get you 370+. I know there are several dynos posted on here you can search though. Although if you plan on going that aggressive I say you need an FMIC as well. __________________ My Youtube Channel
	Appreciate 0 Quote

02-02-2010, 05:40 PM	#17
alpinedevil335 Lieutenant 20 Rep 433 Posts Drives: Alpine White 335i Join Date: Apr 2009 Location: So Cal (562) iTrader: (0)	check my sig
	Appreciate 0 Quote

02-02-2010, 06:02 PM	#19
SIEN 23 Rep 130 Posts Drives: Quickly Join Date: Sep 2009 Location: US/UK iTrader: (0)	Here's a dyno with the same mods done by BMS. It was with high flow (catted) downpipes, BMS intake and JB3. (Think it was using map 7) ETA: Also with 93Oct Attached Images
	Appreciate 0 Quote