|
|
|
|
 |
 
|
 |
BMW Garage | BMW Meets | Register | Today's Posts | Search |
 |
|
BMW 3-Series (E90 E92) Forum
>
PROcede Global Code Clearing Feature
|
 |
| 03-03-2010, 03:49 PM | #1 |
1856
Rep 17,960
Posts
Drives: A Lot
Join Date: Sep 2006
Location: SF Bay, CA
iTrader: (0)
Garage List 2018 Ducati Panigal ... [0.00]
2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00] |
PROcede Global Code Clearing Feature
Just something new that we are working on. Due to all the concern of non powertrain related codes and dealerships, we decided to add a clear function for all the modules that can possible log a code in the case of install/uninstalling a tune.
To test this feature, I misinstalled the Procede to the best of my ability. That means the subconnectors mated to the wrong patches, plugged in backwards, etc,. I ran a BT tool short test on all modules and I got this: BEFORE PROCEDE CODE CLEAR FUNCTION: Short Test MSD80/MSD81 Engine module for N54 Current Fault Codes 29E2: 29E2 Fuel injection rail, pressure sensor signal Error will cause a warning light Error is not currently present Test conditions have not been completed Short circuit or signal interruption Freeze Frame Information Odometer 97368kms 60501miles Engine speed 0.00 rpm rail pressure 267,627.99 hPa voltage of the fuel pressure sensor before mass control valve 2.32 V average rail pressure 4.88 V 2A80: 2A80 Inlet-Vanos variable cam control test, input signal Error will cause a warning light Error is not currently present Test conditions have not been completed Timeout Freeze Frame Information Odometer 97368kms 60501miles Engine speed 0.00 rpm motor status 0.00 0-n status motor control 0.00 0-n voltage Kl. 87 11.48 V 2A85: 2A85 Outlet-VANOS variable cam control test Error will cause a warning light Error is not currently present Test conditions have not been completed Timeout Freeze Frame Information Odometer 97368kms 60501miles Engine speed 0.00 rpm motor status 0.00 0-n status motor control 0.00 0-n voltage Kl. 87 11.48 V 3100: 3100 boost-pressure control, deactivation Error will not cause a warning light Error is not currently present Test conditions have not been completed 2D1B: 2D1B Accelerator pedal module, pedal sensor signal 1 Error will not cause a warning light Error is currently present Test conditions have not been completed Signal or value below threshold Freeze Frame Information Odometer 97368kms 60501miles voltage pedal sensor 1 0.00 V voltage pedal sensor 2 0.00 V supply Fahrtwertgeber 1 5.00 V voltage Kl. 87 11.37 V Event 2 Odometer 97368kms 60501miles voltage pedal sensor 1 0.00 V voltage pedal sensor 2 0.10 V supply Fahrtwertgeber 1 5.00 V voltage Kl. 87 0.00 V 2D1C: 2D1C Accelerator pedal module, pedal sensor signal 2 Error will not cause a warning light Error is currently present Test conditions have not been completed Signal or value below threshold Freeze Frame Information Odometer 97368kms 60501miles voltage pedal sensor 1 0.00 V voltage pedal sensor 2 0.00 V supply output encoder 2 5.00 V voltage Kl. 87 11.37 V Event 2 Odometer 97368kms 60501miles voltage pedal sensor 1 0.00 V voltage pedal sensor 2 0.10 V supply output encoder 2 5.00 V voltage Kl. 87 0.00 V 2D1F: 2D1F Accelerator pedal module, pedal sensor potentiometer, signal Error will cause a warning light Error is currently present Test conditions have not been completed Freeze Frame Information Odometer 97368kms 60501miles supply Fahrtwertgeber 1 5.00 V supply output encoder 2 5.00 V voltage pedal sensor 1 0.00 V voltage pedal sensor 2 0.00 V Event 2 Odometer 97368kms 60501miles supply Fahrtwertgeber 1 5.00 V supply output encoder 2 5.00 V voltage pedal sensor 1 0.00 V voltage pedal sensor 2 0.10 V 2EE0: 2EE0 Coolant temperature sensor, signal Error will cause a warning light Error is not currently present Test conditions have not been completed Short circuit or signal interruption Freeze Frame Information Odometer 97368kms 60501miles voltage motor temperature 3.28 V Engine temperature -48.00 °C ambient temperature 12.75 °C Intake air temperature 30.75 °C CDA8: CDA8 Message (Status KOMBI, 1B4) Error will cause a warning light Error is not currently present Test conditions have not been completed Timeout Freeze Frame Information Odometer 97368kms 60501miles Engine speed 0.00 rpm control unit inside temperature 37.50 °C voltage Kl. 87 11.27 V status motor control 0.00 0-n 2D1E: 2D1E Accelerator pedal module, pedal sensor 2, voltage suppy Error will not cause a warning light Error is not currently present Test conditions have not been completed Freeze Frame Information Odometer 97368kms 60501miles supply Fahrtwertgeber 1 5.00 V supply output encoder 2 1.17 V voltage pedal sensor 2 0.00 V voltage Kl. 87 10.87 V 2CF9: 2CF9 Throttle valve potentiometer 1 Error will cause a warning light Error is currently present Test conditions have not been completed Short circuit or signal interruption Freeze Frame Information Odometer 97368kms 60501miles voltage throttle valve potentiometer 1 4.73 V voltage throttle valve potentiometer 2 0.00 V supply Fahrtwertgeber 1 5.00 V voltage Kl. 87 1.62 V Event 2 Odometer 97368kms 60501miles voltage throttle valve potentiometer 1 4.73 V voltage throttle valve potentiometer 2 0.00 V supply Fahrtwertgeber 1 5.00 V voltage Kl. 87 0.10 V 2CFA: 2CFA Throttle valve potentiometer 2 Error will cause a warning light Error is currently present Test conditions have not been completed Signal or value below threshold Freeze Frame Information Odometer 97368kms 60501miles voltage throttle valve potentiometer 1 4.73 V voltage throttle valve potentiometer 2 0.00 V supply Fahrtwertgeber 1 5.00 V voltage Kl. 87 1.62 V Event 2 Odometer 97368kms 60501miles voltage throttle valve potentiometer 1 4.73 V voltage throttle valve potentiometer 2 0.00 V supply Fahrtwertgeber 1 5.00 V voltage Kl. 87 0.10 V 2D09: 2D09 butterfly valve Error will cause a warning light Error is currently present Test conditions have not been completed Timeout 2ACB: 2ACB DME digital motor electronics main relay, input signal Error will not cause a warning light Error is currently present Test conditions have not been completed Signal or value below threshold Freeze Frame Information Odometer 97368kms 60501miles time since start end 0.00 s voltage Kl. 15 coarse value 1.89 V status motor control 6.00 0-n voltage Kl. 87 0.10 V Event 2 Odometer 97368kms 60501miles time since start end 0.00 s voltage Kl. 15 coarse value 1.88 V status motor control 0.00 0-n voltage Kl. 87 0.00 V 2F30: Error will cause a warning light Error is not currently present Test conditions have not been completed Electronic fuel pump (EKP) Current Fault Codes CED4: Externer Fehler: CAN-ID 0xAA (TORQUE_3) fehlt(e) Error will not cause a warning light Error is not currently present Test conditions have been completed CEC7: Externer Fehler: CAN-Bus-Off Error will not cause a warning light Error is not currently present Test conditions have been completed Gearbox control unit Current Fault Codes No Faults Found Gear lever (GWS) Current Fault Codes No Faults Found Car Access System 3 Current Fault Codes No Faults Found Electronic power steering Current Fault Codes No Faults Found Active cruise control for E65 Current Fault Codes No Faults Found Active front steering for E90 Current Fault Codes No Faults Found Dynamic stability control DXC8 Plus - E90 Current Fault Codes D356: PT-CAN: Message TORQUE_3 (ID 0xAA) not received or wrong message length (DLC). [transmitter: DME] Error will cause a warning light Error is currently present Test conditions have been completed Timeout D355: PT-CAN: Message TORQUE_2 (ID 0x0A9) not received or wrong message length (DLC). [transmitter: DME] Error will cause a warning light Error is currently present Test conditions have been completed Timeout D354: PT-CAN: Message TORQUE_1 (ID 0xA8) not received or wrong message length (DLC). [transmitter: DME] Error will cause a warning light Error is currently present Test conditions have been completed Timeout D347: PT-CAN: BusOff or initialization-Error - open CAN line? Error will cause a warning light Error is currently present Test conditions have been completed Timeout 5E19: DSC-ECU: ECU-internal: Serial-Peripheral-Interface (SPI): ID request not accepted. Error will cause a warning light Error is currently present Test conditions have been completed Tire pressure control module Current Fault Codes D13E: Error: CAN telegram timeout at reception Error will not cause a warning light Error is currently present Test conditions have been completed Central information display Current Fault Codes No Faults Found Central control unit (CON) Current Fault Codes No Faults Found Head-up-display (HUD) Current Fault Codes No Faults Found Instrument cluster PL2 E8x and E9x Current Fault Codes 931B: Outside temperature sensor Error will not cause a warning light Error is not currently present Test conditions have been completed Timeout A3AD: CAN ID 1D0 error: Engine data Error will not cause a warning light Error is not currently present Test conditions have been completed A3AE: CAN ID 0AA error: Idle engine speed Error will not cause a warning light Error is not currently present Test conditions have been completed A3AC: CAN ID 1A6 error: Stretch of way Error will not cause a warning light Error is not currently present Test conditions have been completed A550: ID failure 1A0h speed Error will not cause a warning light Error is not currently present Test conditions have been completed A3AB: CAN ID 193 error: Display ACC DCC Error will not cause a warning light Error is not currently present Test conditions have been completed A3B9: CAN ID 19E error: Status DSC Error will not cause a warning light Error is not currently present Test conditions have been completed Business Radio / User interface (CIC / CCC-BO / M-ASK-BO / RAD2-BO / RAD) Current Fault Codes No Faults Found Professional Radio / User interface (CIC / CCC-BO / M-ASK-BO / RAD2-BO / RAD) Current Fault Codes No Faults Found MOST / CAN gateway CD73/MD73 Current Fault Codes No Faults Found Telematic control module Current Fault Codes No Faults Found Trailer module Current Fault Codes No Faults Found Footwell module (FRM)for vehicles up to 09/2006 Current Fault Codes No Faults Found Footwell module (FRM)for vehicles after 09/2006 Current Fault Codes No Faults Found Rain and light sensor Current Fault Codes No Faults Found Heating and Air conditioning (IHR/IHKA) control unit Current Fault Codes E717: CAN message: Dates of engine Error will not cause a warning light Error is not currently present Test conditions have been completed Timeout E71A: CAN message: Torque 3 Error will not cause a warning light Error is not currently present Test conditions have been completed Timeout E71B: CAN message: Heat flow Motor Error will not cause a warning light Error is not currently present Test conditions have been completed Timeout E71C: CAN message: Speed Error will not cause a warning light Error is not currently present Test conditions have been completed Timeout E720: CAN message: Power management Error will not cause a warning light Error is not currently present Test conditions have been completed Timeout Junction box Current Fault Codes A6CF: Sensor AUC Error will not cause a warning light Error is currently present Test conditions have been completed Short circuit or signal interruption C90B: Communication PT_CAN Error will not cause a warning light Error is not currently present Test conditions have been completed Timeout Roof function control center Current Fault Codes No Faults Found Airbags Current Fault Codes 93FB: SBR - function - Velocity signal missing Error will cause a warning light Error is currently present Test conditions have been completed Timeout Park distance control Current Fault Codes No Faults Found Seat module - driver (SMFA) Current Fault Codes No Faults Found Longitudinal dynamic management Current Fault Codes No Faults Found Transmission distribution module Current Fault Codes No Faults Found Convertible top module E93 Current Fault Codes No Faults Found Then I applied the new Global Code Clear function that we are working on and conducted another BT Tool "short test" AFTER PROCEDE CODE CLEAR FUNCTION: Short Test MSD80/MSD81 Engine module for N54 Current Fault Codes No Faults Found Electronic fuel pump (EKP) Current Fault Codes No Faults Found Gearbox control unit Current Fault Codes No Faults Found Gear lever (GWS) Current Fault Codes No Faults Found Car Access System 3 Current Fault Codes No Faults Found Electronic power steering Current Fault Codes No Faults Found Active cruise control for E65 Current Fault Codes No Faults Found Active front steering for E90 Current Fault Codes No Faults Found Dynamic stability control DXC8 Plus - E90 Current Fault Codes No Faults Found Tire pressure control module Current Fault Codes No Faults Found Central information display Current Fault Codes No Faults Found Central control unit (CON) Current Fault Codes No Faults Found Head-up-display (HUD) Current Fault Codes No Faults Found Instrument cluster PL2 E8x and E9x Current Fault Codes No Faults Found Business Radio / User interface (CIC / CCC-BO / M-ASK-BO / RAD2-BO / RAD) Current Fault Codes No Faults Found Professional Radio / User interface (CIC / CCC-BO / M-ASK-BO / RAD2-BO / RAD) Current Fault Codes No Faults Found MOST / CAN gateway CD73/MD73 Current Fault Codes No Faults Found Telematic control module Current Fault Codes No Faults Found Trailer module Current Fault Codes No Faults Found Footwell module (FRM)for vehicles up to 09/2006 Current Fault Codes No Faults Found Footwell module (FRM)for vehicles after 09/2006 Current Fault Codes No Faults Found Rain and light sensor Current Fault Codes No Faults Found Heating and Air conditioning (IHR/IHKA) control unit Current Fault Codes No Faults Found Junction box Current Fault Codes No Faults Found Roof function control center Current Fault Codes No Faults Found Airbags Current Fault Codes No Faults Found Park distance control Current Fault Codes No Faults Found Seat module - driver (SMFA) Current Fault Codes No Faults Found Longitudinal dynamic management Current Fault Codes No Faults Found Transmission distribution module Current Fault Codes No Faults Found Convertible top module E93 Current Fault Codes No Faults Found Would this be something that you guys would be interested in?  Shiv |
| 03-03-2010, 03:53 PM | #2 |
|
Brigadier General
 
405
Rep 3,157
Posts |
AWESOME!
__________________
2015 M3 BPM Tuned, Eibach, Magnaflow and more www.tmrmzine.com/m3/f80
SOLD E92 Slēk Carbon Fiber Widebody M3 www.tmrmzine.com/m3/slek/ SOLD E92 335i Stage 3+ with all the toys www.tmrmzine.com/335/ SOLD E39 M5 Modded, What a great car! www.tmrmzine.com/m5/ |
|
Appreciate
0
|
| 03-03-2010, 03:59 PM | #4 |
|
Captain
 
39
Rep 944
Posts |
Great!
__________________
http://www.youtube.com/user/Ferre86
| e93 M-DCT ESS VT2-625 | Akra Slip-on | Challenge Race Catless x-pipe | Challenge front lip | Challenge Diffuser | Carbon front grilles | defi gauges control unit | Macht Schnell gauge panel | E93 M3 trunk Spoiler | IND Carbon Fiber Side Markers | |
|
Appreciate
0
|
| 03-03-2010, 04:12 PM | #7 |
|
Major
 
23
Rep 1,179
Posts |
this is a good thing
Essentially your adding the "quick clear" function that is used on the GT1, and the currrent ICOMs
this is a good thing if you want to clear the fault memory of the diagnositic system of the car and turn out the warning lights. But i doubt it will have any effect on the information most people are looking to have sanitized. then again, i could be totally off base ..  |
|
Appreciate
0
|
| 03-03-2010, 04:25 PM | #8 |
|
Brigadier General
138
Rep 4,764
Posts |
Clearing all code modules sounds great to me.
|
|
Appreciate
0
|
| 03-03-2010, 04:34 PM | #10 |
|
Major
53
Rep 1,357
Posts
Drives: '08 e92 335i COBB 4.01 Stage 1
Join Date: Aug 2008
Location: Bay Area, CA (Alameda)
|
Can the procede read non powertrain related codes and display them on the laptop? If it could, then there will be no need for a BT tool all together. I'm personally interested because I bought my car and want to service it myself after the warranty runs out.
It would also end the debate for the JB3 guys that say a BT tool is a must even for procede users... |
|
Appreciate
0
|
| 03-03-2010, 04:49 PM | #11 | |
|
1856
Rep 17,960
Posts
Drives: A Lot
Join Date: Sep 2006
Location: SF Bay, CA
iTrader: (0)
Garage List 2018 Ducati Panigal ... [0.00]
2016 Mazda CX5 [0.00] 2017 Aprilia Tuono ... [0.00] 2019 BMW M2 Competi ... [0.00] 2015 BMW M5 Competi ... [10.00] 2016 Ducati XDiavel S [0.00] 2016 AMG GT S [0.00] 2011 Ferrari 458 It ... [0.00] 2017 Charger Hellcat [0.00] 2015 KTM Super Duke ... [0.00] 2016 KTM RC390 [0.00] |
Quote:
Shiv |
|
|
Appreciate
0
|
| 03-03-2010, 04:53 PM | #13 |
|
Lieutenant Colonel
 141
Rep 1,953
Posts
Drives: 2020 X3M Competition
Join Date: Mar 2007
Location: Los Angeles, CA
|
so this is essentially going to make the current code clearing procedure more comprehensive?
|
|
Appreciate
0
|
| 03-03-2010, 05:13 PM | #15 | |
|
Captain
144
Rep 871
Posts |
Shiv,
I say make it read and clear ANY codes it can. If you can make the procede end up being essentially equivalent to a BT cable.. well let's just leave it to everyone's imagination what that would mean. Quote:
|
|
|
Appreciate
0
|
| 03-03-2010, 05:15 PM | #16 |
|
Captain
62
Rep 840
Posts |
If you decide to include all codes I think non-powertrain codes should show up on a separate channel so that you can ignore them in some cases. I have a few non-powertrain codes that never go away and they don't seem to cause any issues that I know of.
|
|
Appreciate
0
|
| 03-03-2010, 05:20 PM | #17 | |
|
Major
53
Rep 1,357
Posts
Drives: '08 e92 335i COBB 4.01 Stage 1
Join Date: Aug 2008
Location: Bay Area, CA (Alameda)
|
Quote:
However, I think displaying the non-powertrain related codes would be awesome. It basically makes the Procede have a built in BT Scanner, but it would be superior in that it is able to datalog more efficiently. So, whatever way it's easier to implement this, I think this would be another thing that people would strongly consider when they get a tune. And, one of the main arguments for the JB3 vs the Procede is the price point. I don't feel you have to justify anymore the differences of value (to me anyways), but it wouldn't hurt to add this as an extra feature. With your ability to display boost and the ability to display and read ALL codes, you in essence save the consumer from buying a boost gauge and the BT Scanner, things that people have to purchase with other tunes. |
|
|
Appreciate
0
|
| 03-03-2010, 05:24 PM | #18 |
|
Banned
234
Rep 3,012
Posts |
This will only clear fault codes. For those of you worried about speed limiter data etc, it will not clear that afaik. The same with other things like over rev and general data/logistics.
|
|
Appreciate
0
|
| 03-03-2010, 05:28 PM | #19 | |
|
Lieutenant General
715
Rep 10,584
Posts |
Quote:
__________________
 |
|
|
Appreciate
0
|
| 03-03-2010, 06:41 PM | #20 | |
|
Lieutenant Colonel
106
Rep 1,644
Posts |
Quote:
__________________
Retired: '07 E92 335 MB, '16 M5COMP SG Current: '22 X3MCOMP SPY |
|
|
Appreciate
0
|
| 03-03-2010, 06:48 PM | #21 |
|
Lieutenant Colonel
161
Rep 1,677
Posts |
The features just keeps adding up that you could potentially sell a separate unit for all the features minus the tune. Think of the flash community =D.
Feature after feature. You're like the Diddy of the e90 tunes. |
|
Appreciate
0
|
 |
| Bookmarks |
|
|
