Brake Performance OEM style rotors?

Phil G · 04-26-2010, 10:53 PM

So, I just changed my old pads this weekend to Cool Carbon pads and decided to measure my rotors in the process as they had developed a lip on the outside. Looks like they are about down to 28.1 mm when the minimum spec on the rotor is 28.4 mm. So, looks like I might need to spend money on new rotors too.

I noticed some people here use Brake Performance rotors as they are inexpensive, and usually get the cross-drilled and/or slotted. I LOVE the looks of them, but I did read a couple of posts here with people who were concerned about the slots going all the way to the edge of the rotor and the structural integrity of drilled rotors......so I'm wondering if I should just go with the OEM style. They are CHEAP (like $127 for a pair of front rotors), however I'm wondering about the quality. I saw in a search someone was concerned about them maybe using solid steel, is this true and is this really bad if so? Is there any weight saving aspect associated with the OEM style rotors over normal OEM rotors?

Thanks!

E90MTL · 04-27-2010, 09:23 AM

CAll **********s... ask for Alan or Eddie.

**********s.com
3350 E Birch St, Suite 205
Brea, CA 92821
Phone: **************
Fax: 714-857-1003
Hours: Monday thru Friday 8 AM to 5 PM PST

STOPTECH - Centric Rotors
2 front rotors P/N 120.34093 - $88
2 rear rotors P/N 120.34080 - $79.50
Total 167.50

335i_4D · 04-30-2010, 02:51 PM

Better yet, go to your local stealership.
Heard that they charge 200+ for each.
Think they cast them out of a very rare metal and at night, they have a green glow to them...

Just ordered Dimple drilled - Slotted.
NOT for any performance gain ... just the look and the warranty !

04-26-2010, 10:53 PM	#1
Phil G Dominator of Deep South curvy roads 57 Rep 340 Posts Drives: '07 335i Coupe Join Date: Apr 2006 Location: Atlanta, GA iTrader: (0)	Brake Performance OEM style rotors? So, I just changed my old pads this weekend to Cool Carbon pads and decided to measure my rotors in the process as they had developed a lip on the outside. Looks like they are about down to 28.1 mm when the minimum spec on the rotor is 28.4 mm. So, looks like I might need to spend money on new rotors too. I noticed some people here use Brake Performance rotors as they are inexpensive, and usually get the cross-drilled and/or slotted. I LOVE the looks of them, but I did read a couple of posts here with people who were concerned about the slots going all the way to the edge of the rotor and the structural integrity of drilled rotors......so I'm wondering if I should just go with the OEM style. They are CHEAP (like $127 for a pair of front rotors), however I'm wondering about the quality. I saw in a search someone was concerned about them maybe using solid steel, is this true and is this really bad if so? Is there any weight saving aspect associated with the OEM style rotors over normal OEM rotors? Thanks! __________________ -'07 335i coupe (build date 02/2007) - Space Grey/Black Dakota/Dark Burl - 6MT/ZPP/ZSP/Nav/CA/Heated Seats. Acquired in Munich 3/2007 via European Delivery. 16 years and almost 220k miles of pure joy! -'06 911 Carrera S - Black/Black - Full Leather/Sport Chrono/Porsche Sport Exhaust/Nav - 80k miles. Acquired 1/2021. One needy old German car just wasn't enough!
	Appreciate 0 Tweet Quote

04-27-2010, 09:23 AM	#2
E90MTL Private First Class 23 Rep 197 Posts Drives: '07 E90 Join Date: Aug 2009 Location: Montreal iTrader: (1)	CAll ********s... ask for Alan or Eddie. ******s.com 3350 E Birch St, Suite 205 Brea, CA 92821 Phone: ************ Fax: 714-857-1003 Hours: Monday thru Friday 8 AM to 5 PM PST STOPTECH - Centric Rotors 2 front rotors P/N 120.34093 - $88 2 rear rotors P/N 120.34080 - $79.50 Total 167.50 __________________ E90 2007 335i, AW, 6AT/Step, Proceed V4, AFE CAI, Helix FMIC, Britalman Exhaust, 94oct all the time. Dyno - 433tq @ the wheel (Pump gas and stock DP's) Per vox illic est haud terminus
	Appreciate 0 Quote

04-30-2010, 02:51 PM	#3
335i_4D Now in the dark side ! 69 Rep 1,134 Posts Drives: 2011 911S 997.2 Cab Join Date: Feb 2010 Location: The Great North iTrader: (3)	Better yet, go to your local stealership. Heard that they charge 200+ for each. Think they cast them out of a very rare metal and at night, they have a green glow to them... Just ordered Dimple drilled - Slotted. NOT for any performance gain ... just the look and the warranty ! __________________ Present: 2011 Porsche Carrera S Cab, white (Now on the dark side!) BMW X3 M40i (wifey) Past:2012 335i Sport Black, 20" 356 wheels, M Sport Aero, MPE (Sold -kinda missed) 2010 X5 35d Black fully loaded (Sold) 2007 335i sedan Antracite (Sold and missed !) Last edited by 335i_4D; 04-30-2010 at 08:36 PM..
	Appreciate 0 Quote