[agad]

just want to upgrade my license plate light to oem leds.. i read here alot of topics and found that it is not plug & play as the wiring harness is different also there might be an error on dashboard and needs special resistor ..

Does anybody knows what is the exact parts needed??
1) Oem parts & part numbers
2) special harness
3) Resistors (from radioshack)

[E92-Lighting]

you can just use festoon bulbs with canbus which we stock, 100% plug and play

[Mike@F1 Autohaüs]

Originally Posted by abcarino

just want to upgrade my license plate light to oem leds.. i read here alot of topics and found that it is not plug & play as the wiring harness is different also there might be an error on dashboard and needs special resistor ..

Does anybody knows what is the exact parts needed??
1) Oem parts & part numbers
2) special harness
3) Resistors (from radioshack)

2 BMW LED registration lights (# 63 26 7 193 293) $15/each
2 BMW Universal Socket aka plug connector (# 61 13 6 925 634) $1.40 each
4 BMW Bushing Contacts aka pin contacts (# 61 13 1 383 776) if you want to build your own wire. $0.28 each.
some 20 or 22 guage wire
heat shrink
or
4 Bushing Contacts with wire (# 61 13 0 005 197) $1.28 each

Resistors, you'll have to figure out that value on your own

[agad]

Originally Posted by Mike@F1 Autohaüs

Resistors, you'll have to figure out that value on your own

Thanxx
don't u have any idea about the voltage , ampair , watt of the resistor cause there are tons of capacities ... thanks

[CrimsonIvy35i]

Originally Posted by abcarino

Thanxx
don't u have any idea about the voltage , ampair , watt of the resistor cause there are tons of capacities ... thanks

can anyone please answer this question?