cant get oem wheel off?

UltraRacer13 · 07-15-2010, 11:31 PM

any ideas?? all lugs off- car jacked up- frozen on there.

BKV122 · 07-15-2010, 11:35 PM

kick it!

Make sure jack is secure tho

ModBargains.com · 07-15-2010, 11:38 PM

The trick is to use a rubber mallet .. you can smack it and give it a bit of a "love tap"

on the back side of the tire to loosen it up a bit for you to remove the wheels.

Jeff@TopGearSolutions · 07-15-2010, 11:40 PM

Assuming car is securely jacked and on stands..

Hit firmly the left side of the tire 9 O clock and right side of the tire 3 o clock... back and forth.

Should work.

I usually use the bottom side of my hand like a hammer LOL

When re-installing wheels put a small amount of anti-seize or grease on the hub to prevent this next time.

UltraRacer13 · 07-16-2010, 12:51 AM

Thanks- got it! twas a beeyatch.

Bartman619 · 07-16-2010, 01:00 AM

take the jack handle and give the tire a couple of whacks..don't hit your rims !!

1QuikWS6 · 07-16-2010, 04:37 AM

Center hole in wheels pilot off axle hub + hub rusts = wheel hard to remove

Use rubber mallet as directed to remove wheel, clean up axle hub (remove rust with sandpaper), apply small amount of anti-seize around hub, replace wheel. Next time it has to come off it will be EZ

ibeclueless · 07-16-2010, 06:34 AM

i used some wd-40 and it came off right away

import36 · 07-16-2010, 09:11 AM

the kick method always works for me...

michael1284 · 07-16-2010, 09:21 AM

Quote:

Originally Posted by import36

the kick method always works for me...

+1 for kick method. used to use my hand but that can hurt sometimes

VMRWheels · 07-16-2010, 12:43 PM

Quote:

Originally Posted by import36

the kick method always works for me...

+1. BMW really needs to upgrade to an alternative material for their hubs...

-Charles@VMRWheels

Rice&Pumkin · 07-20-2010, 09:17 AM

+1 for rubber mallet I carry 1 in my trunk.

07-15-2010, 11:31 PM	#1
UltraRacer13 Wannabe Track Rat 70 Rep 930 Posts Drives: 17 OG M2 Join Date: Mar 2010 Location: Texas iTrader: (1)	cant get oem wheel off? any ideas?? all lugs off- car jacked up- frozen on there.
	Appreciate 0 Tweet Quote

07-15-2010, 11:35 PM	#2
BKV122 Major 47 Rep 1,160 Posts Drives: E90 Join Date: Feb 2009 Location: NY iTrader: (1) Garage List 2006 330xi [9.50]	kick it! Make sure jack is secure tho __________________ Monaco Blue 330xi - Terra Interior/6-MT/Sport/Premium/Cold/CSL's/M3 Spoiler Lip/Black Kidney's
	Appreciate 0 Quote

07-15-2010, 11:38 PM	#3
ModBargains.com Banned 485 Rep 13,582 Posts Drives: JB E92 335i Join Date: Feb 2008 Location: 1721 E. Lambert Rd #C, La Habra, CA 90631 iTrader: (51)	The trick is to use a rubber mallet .. you can smack it and give it a bit of a "love tap" on the back side of the tire to loosen it up a bit for you to remove the wheels.
	Appreciate 0 Quote

07-15-2010, 11:40 PM	#4
Jeff@TopGearSolutions 3467 Rep 79,211 Posts Drives: C6 Z06, 09 335i, 10 335xi Join Date: Dec 2008 Location: www.TopGearSolutions.com iTrader: (37)	Assuming car is securely jacked and on stands.. Hit firmly the left side of the tire 9 O clock and right side of the tire 3 o clock... back and forth. Should work. I usually use the bottom side of my hand like a hammer LOL When re-installing wheels put a small amount of anti-seize or grease on the hub to prevent this next time.
	Appreciate 0 Quote

07-16-2010, 12:51 AM	#5
UltraRacer13 Wannabe Track Rat 70 Rep 930 Posts Drives: 17 OG M2 Join Date: Mar 2010 Location: Texas iTrader: (1)	Thanks- got it! twas a beeyatch.
	Appreciate 0 Quote

07-16-2010, 01:00 AM	#6
Bartman619 Captain 25 Rep 701 Posts Drives: Bimmer Join Date: Jun 2008 Location: SDCA iTrader: (2)	take the jack handle and give the tire a couple of whacks..don't hit your rims !!
	Appreciate 0 Quote

07-16-2010, 04:37 AM	#7
1QuikWS6 No 55mph 1627 Rep 8,495 Posts Drives: F32 435ix MSport Join Date: Jul 2009 Location: Blitzburgh, PA iTrader: (113) Garage List 2022 BMW M440ix Vert [0.00] 2015 BMW 435ix MSport [0.00] 2000 Pontiac Trans Am [0.00]	Center hole in wheels pilot off axle hub + hub rusts = wheel hard to remove Use rubber mallet as directed to remove wheel, clean up axle hub (remove rust with sandpaper), apply small amount of anti-seize around hub, replace wheel. Next time it has to come off it will be EZ __________________ F32 435ix//MGM//M Sport-Prem-Tech-Driver Assist-Lighting-Cold Weather-Dyn Handling Pkgs//M4 Black Lthr Int w/M4 Alum Blade Trim//HK w/Bavsound Stg3//763M//M4 Euro LCI Tails//M4 Mirrors w/CF Covers//AWCarbon CF F/R Spoilers-Side Splitters-Diffuser 6WB/ID6 HU+HUD/IND M4 Alcantara Armrest//PURE S2 Turbo//AA FMIC+DP//ER CP+TIC//3.5bar TMAP/TS DV//AWE Tuning Exh w/Blk Tips//Turner MS CF Intake//BM3 Cary Jordan Tune//MPerf Diff//PrecRW Ignition Kit
	Appreciate 0 Quote

07-16-2010, 06:34 AM	#8
ibeclueless What 142 Rep 9,325 Posts Drives: E92 328xi Join Date: Mar 2009 Location: Quincy, MA iTrader: (1)	i used some wd-40 and it came off right away __________________ E92 328xi Space Gray Aero Lip \| M3 Side Skirts \| CF Performance Spoiler \| ACS Roof \| Gloss Black Grilles \| LUX H8 Angels \| BMW Performance Exhaust My E92 Photos
	Appreciate 0 Quote

07-16-2010, 09:11 AM	#9
import36 Burrito bowl connoisseur 133 Rep 3,501 Posts Drives: 2015 Nissan GTR Black Edition Join Date: Feb 2008 Location: Seven Cities iTrader: (1)	the kick method always works for me...
	Appreciate 0 Quote

07-20-2010, 09:17 AM	#12
Rice&Pumkin LionLungz 17 Rep 178 Posts Drives: 335i E92 & 450H Join Date: May 2008 Location: Queens NY iTrader: (5)	+1 for rubber mallet I carry 1 in my trunk.
	Appreciate 0 Quote