Problem with PROCEDE V3 Install

E92_335 · 08-30-2010, 11:54 PM

Delete

CT_335i · 08-30-2010, 11:57 PM

Not an expert here, but I think there are different software versions for MT and AT.

For the comm issue, you probably need to locate which comm port its using (in win 7) and update the comm port file in the Procede software.

ttomczak · 08-31-2010, 12:31 AM

I run boot camp and the Proceed needs to be "turned on" for the laptop to see it...

As to the other, I would reinstall the whole system, this has to be a connector in the wrong location... Even my minor issue of a piece of tape on the DME connector did not cause this kind of error...

Again, try the reinstall and check all the power connections...

Hope this helps!

AltecBX · 08-31-2010, 12:46 AM

Sounds like there is something not connected right. Double check again. Just unplug everything and plug everything back.
Also make sure that the Procede is connected properly to the power supply.

SfValley335i · 08-31-2010, 01:23 AM

you probably switched around the small sub connectors...

ren · 08-31-2010, 01:38 AM

Check the power connection of procede. If it's not getting power it may cause most of those codes and you wouldn't be able to connect to it with your laptop as well.
Good luck

CT_335i · 08-31-2010, 08:11 AM

In win xp go under device manager and see which port the USB to serial cable was assigned to. It may be assigned to something other than the default comm port.

If it is, head to the Procede folder and locate the comm port file and edit the port number. You're using a Mac, so its very likely that the default comm port is used by another device.

This would explain why it won't talk to the procede unit and you can't get it to go online.

ren · 08-31-2010, 11:16 AM

Quote:

Originally Posted by E92_335

Is the power connection the green plug where I unplug one of the wires and plug it into the procede and replace it with another one of the Procede wires?

Yes, make sure that you inserted Procede's black power connector in the slot that the orange one was in.

Calvin@Vishnu · 08-31-2010, 11:20 AM

If you can't figure the cause of the fault, feel free to ship it to us to look at. If necessary, we will repair/reprogram/rewire it. A pretty good idea if you are purchasing anything used

It's a free service, of course.

mkPOTO · 08-31-2010, 06:27 PM

Quote:

Originally Posted by AltecBX

Sounds like there is something not connected right. Double check again. Just unplug everything and plug everything back.
Also make sure that the Procede is connected properly to the power supply.

i had the same thing happen and the same icon and after talking to shiv i found out that something wasnt in right and i messed up a connection, so I would suggest you check your connections

mkPOTO · 08-31-2010, 06:28 PM

Quote:

Originally Posted by Calvin@Vishnu

If you can't figure the cause of the fault, feel free to ship it to us to look at. If necessary, we will repair/reprogram/rewire it. A pretty good idea if you are purchasing anything used

It's a free service, of course.

wow thats awesome, I had to pay to get mine looked over and fixed, great deal

E92_335 · 09-04-2010, 06:38 AM

Quote:

Originally Posted by mkPOTO

i had the same thing happen and the same icon and after talking to shiv i found out that something wasnt in right and i messed up a connection, so I would suggest you check your connections

Hmm ok. I'll triple check the connections thanks. What did you do wrong?

Yemeniii · 10-15-2010, 09:45 PM

hey please call me and tell me if you fixed it cause i have the same prob i plug it in without the chip and it works fine when i put in the procede it gives me the same problems my number is 909 904 6666

08-30-2010, 11:54 PM	#1
E92_335 Colonel 159 Rep 2,870 Posts Drives: G20 330i Join Date: Jun 2007 Location: CA iTrader: (7)	Delete Delete __________________ Last edited by E92_335; 10-05-2013 at 05:06 PM..
	Appreciate 0 Tweet Quote

08-30-2010, 11:57 PM	#2
CT_335i Private 0 Rep 80 Posts Drives: 335i Monaco Blue, E90 Join Date: Jul 2010 Location: Bay Area, CA iTrader: (1)	Not an expert here, but I think there are different software versions for MT and AT. For the comm issue, you probably need to locate which comm port its using (in win 7) and update the comm port file in the Procede software.
	Appreciate 0 Quote

08-31-2010, 12:31 AM	#3
ttomczak Private First Class 19 Rep 182 Posts Drives: 2015 X5 3.5 M-Sport Join Date: Aug 2010 Location: North Carolina iTrader: (5)	I run boot camp and the Proceed needs to be "turned on" for the laptop to see it... As to the other, I would reinstall the whole system, this has to be a connector in the wrong location... Even my minor issue of a piece of tape on the DME connector did not cause this kind of error... Again, try the reinstall and check all the power connections... Hope this helps! __________________ 2015 F15 X5 3.5i M-Sport SG Past Rides: 2001 E39 Dinan 5 - 2006 E63 M6 - 2007 335i E93 - 2007 X5 E70 4.8i - 2010 X5 E70 3.0i 2016 428ix M-Sport Gran Coupe - 2014 E71 X6M
	Appreciate 0 Quote

08-31-2010, 12:46 AM	#4
AltecBX Colonel 336 Rep 2,663 Posts Drives: BMW 335xi Sedan; BMW M3 ZCP Join Date: Nov 2007 Location: NYC iTrader: (0) Garage List 2018 BMW M3 ZCP [0.00] 2007 BMW 335Xi [0.00]	Sounds like there is something not connected right. Double check again. Just unplug everything and plug everything back. Also make sure that the Procede is connected properly to the power supply. __________________ 335xi Sedan 6AT \| Weather(70-85°F) \| N54 Tune Comparison Chart \|\| N54 Turbo Upgrade Comparison Chart -PROcede Rev. 2.5 ~ v5 (3/17 maps) / JB4 (8/21 maps) / COBB (Stg2+FMIC LT Aggressive maps) †Procede Map2(UT 45 - IGN 40) Aggression Target 2.0 \| 0-60 in 4.0sec \|\| †Cobb E30 LT (35% Ethanol/65% 93 Octane) \| 0-60 in 3.9sec AR Design Catless DP \| BMS DCI + OCC \| ETS 5 FMIC \| Alpina B3 Trans Flash \|235/265 19" Michelin PSS
	Appreciate 0 Quote

08-31-2010, 01:23 AM	#5
SfValley335i Colonel 167 Rep 2,409 Posts Drives: Current:135i Sold:335i sedan Join Date: Mar 2007 Location: City of Angels iTrader: (8)	you probably switched around the small sub connectors...
	Appreciate 0 Quote

08-31-2010, 01:38 AM	#6
ren Captain 62 Rep 840 Posts Drives: 2024 X7 M60i Join Date: Jan 2007 Location: U.S. iTrader: (8)	Check the power connection of procede. If it's not getting power it may cause most of those codes and you wouldn't be able to connect to it with your laptop as well. Good luck
	Appreciate 0 Quote

08-31-2010, 08:11 AM	#7
CT_335i Private 0 Rep 80 Posts Drives: 335i Monaco Blue, E90 Join Date: Jul 2010 Location: Bay Area, CA iTrader: (1)	In win xp go under device manager and see which port the USB to serial cable was assigned to. It may be assigned to something other than the default comm port. If it is, head to the Procede folder and locate the comm port file and edit the port number. You're using a Mac, so its very likely that the default comm port is used by another device. This would explain why it won't talk to the procede unit and you can't get it to go online.
	Appreciate 0 Quote

08-31-2010, 11:20 AM	#9
Calvin@Vishnu 52 Rep 428 Posts Drives: 2010 335i Join Date: Dec 2006 Location: NorCal iTrader: (0)	If you can't figure the cause of the fault, feel free to ship it to us to look at. If necessary, we will repair/reprogram/rewire it. A pretty good idea if you are purchasing anything used It's a free service, of course.
	Appreciate 0 Quote

10-15-2010, 09:45 PM	#13
Yemeniii New Member 7 Rep 27 Posts Drives: 2007 335i coupe Join Date: Oct 2010 Location: california iTrader: (0)	hey please call me and tell me if you fixed it cause i have the same prob i plug it in without the chip and it works fine when i put in the procede it gives me the same problems my number is 909 904 6666
	Appreciate 0 Quote