✚WHEELSTO

Ryan@IND · 09-10-2010, 12:55 AM

Ever since the introduction of Macht Schnell into the world of BMW, we have been big fan and advocate. Products are high quality and the beauty is in its simplicity of design and focus on function.

Stock downpipes cause a major restriction in exhaust flow coupled with their small 57mm (2.25″) pipe diameter and numerous crush-bends with factory pre-cats squeezed in engine compartment. This results in excessive backpressure and excessive heat, which ultimately affects overall performance at all RPM loads.

Macht Schnell’s 76.2mm (3.00″) N54 Catless Track Downpipes allow instantaneous turbo spooling and ultra-low backpressure proving significant hp/tq gains that can be felt immediately after installation.

Mandrel-bent T304 Stainless Steel tubing is used to ensure constant exhaust flow is achieved by eliminating any restrictions, resulting in maximum gains and noticeable sound during turbo spooling. TIG-welded construction and Stainless Steel V-Band/catback flanges are durable as well as pleasing to the eyes. Heavy Duty exhaust gaskets and Stainless locking fasteners complete the package.

Stainless O2 sensor bung locations are mounted in the factory locations while introducing additional stainless steel thermocouple bungs for those monitoring EGTs.

Macht Schnell 3.0" Stainless Steel Down Pipe

http://www.wstoshop.com/servlet/the-...ownpipe/Detail

Downpipe Features:
- 76.2mm overall diameter, eliminating restrictive factory pre-cats and crush bends
- 100% T304 Stainless Steel construction, using mandrel bends
- Precision TIG welded joints
- Heavy-Duty Stainless V-Band/Exhaust flanges
- Heavy-Duty locking fasteners and exhaust gaskets included
- Factory O2 locations retained with Stainless Steel bungs
- Pre-installed Stainless EGT bungs for easy thermocouple mounting
- Reduced underhood temperatures

Macht Schnell 3.0" Thermal Coated Down Pipe

http://www.wstoshop.com/servlet/the-...ownpipe/Detail

Downpipe Features:
- 76.2mm overall diameter, eliminating restrictive factory pre-cats and crush bends
- ThermalCoating reduces surface temperatures by as much as 54%
- Meets U.S. military specification MIL-C-81751B for metallic-ceramic coatings, including FAA approval
- 100% T304 Stainless Steel construction, using mandrel bends
- Precision TIG welded joints
- Heavy-Duty Stainless V-Band/Exhaust flanges
- Heavy-Duty locking fasteners and exhaust gaskets included
- Factory O2 locations retained with Stainless Steel bungs
- Pre-installed Stainless EGT bungs for easy thermocouple mounting
- Reduced underhood temperatures

You can check out more Macht Schnell products HERE

use coupon code: newsite5 to get 5% off + free shipping on these and other Macht Schnell products!

How to Order or Get More Information:
Click on the pictures to go to order online
Call: 312.880.7767
Email: info@wheelsto.com
PM the WheelSTO Crew:
Julius ● Julius@WSTO
Dave ● Dave@WSTO
Support ● WheelSTO

sleepergm · 09-16-2010, 11:26 PM

Wow looks good ... just need some info. What is the shipping to Hong Kong? And will I throw a code with the downpipe due to O2 sensors? Also emmissions?

Thanks

UCF 335 · 09-17-2010, 03:20 PM

Price Shipped To 32708 Please!

I335 · 09-17-2010, 03:50 PM

Can we get 'em w/HFCs coated too?

wonsungnabi · 09-18-2010, 06:05 PM

Any plan for GB?

Ryan@IND · 09-23-2010, 10:12 PM

Quote:

Originally Posted by sleepergm

Wow looks good ... just need some info. What is the shipping to Hong Kong? And will I throw a code with the downpipe due to O2 sensors? Also emmissions?

Thanks

Sent you PM!

We supply a couple of different flash tunes as well as the simple BMW down pipe Fix as a remedy for the "check Engine light" issue.

Quote:

Originally Posted by goblue8

Price Shipped To 32708 Please!

sent you PM!

Quote:

Originally Posted by I335

Can we get 'em w/HFCs coated too?

There is no catted version currently~~

Quote:

Originally Posted by wonsungnabi

Any plan for GB?

no plans for GB, but we do have some specials on them. Please feel free to PM!

Thank you all!

ajaygill · 09-26-2010, 12:05 AM

please pm me price shipped to singapore for ur downpipes range
thanks

Ryan@IND · 10-01-2010, 07:26 PM

Quote:

Originally Posted by ajaygill

please pm me price shipped to singapore for ur downpipes range
thanks

sent you PM.

use coupon code: newsite5 to get 5% off + free shipping on these

sdstatestud88 · 10-14-2010, 10:02 PM

PM lowest price shipped to 92110 for thermal coated

Thanks

Ryan@IND · 10-15-2010, 11:54 PM

Quote:

Originally Posted by sdstatestud88

PM lowest price shipped to 92110 for thermal coated

Thanks

quoted you "Special" pricing!

PKumarM3 · 10-16-2010, 12:16 AM

make downpipes that fit xi models!

Ryan@IND · 10-20-2010, 11:10 AM

Quote:

Originally Posted by PKumarM3

make downpipes that fit xi models!

I agree. Macht Schnell much like many other manufacturers are aware of this. we'll have to wait and see...

techlogik · 10-20-2010, 12:12 PM

I don't understand what *True 3"* means? Doesn't it have to taper to 2.5" to fit the stock exhaust setup still? So it actually does still taper to 2.5"?

sourphish · 10-20-2010, 04:18 PM

Quote:

Originally Posted by techlogik

I don't understand what *True 3"* means? Doesn't it have to taper to 2.5" to fit the stock exhaust setup still? So it actually does still taper to 2.5"?

That's what I'm wondering as well. I recently just purchased an Ultimate Racing catback exhaust (it's 2.5") so what down pipes would I be getting to fit that?

vwown3d · 10-21-2010, 10:06 PM

Bump can I get a price for the non coated ones?

Thanks!!

VR46 · 10-22-2010, 09:53 AM

Please pm price

Ryan@IND · 12-14-2010, 07:34 PM

Quote:

Originally Posted by techlogik

I don't understand what *True 3"* means? Doesn't it have to taper to 2.5" to fit the stock exhaust setup still? So it actually does still taper to 2.5"?

Quote:

Originally Posted by sourphish

That's what I'm wondering as well. I recently just purchased an Ultimate Racing catback exhaust (it's 2.5") so what down pipes would I be getting to fit that?

the True 3" really refers to the body of the pipes. Some of the other brands have flat spots and "dents" for clearance whereas the Macht Schnell DP is 3" all the way from the turbo and tapers right at the end flange where it mates up to the exhaust piping.

Quote:

Originally Posted by VR46

Please pm price

Quote:

Originally Posted by vwown3d

Bump can I get a price for the non coated ones?

Thanks!!

sent you guys pm's on these.

we still have specials on the Macht Schnell products! Please feel free to give us a call at 312.880.7767

BMWnation · 12-15-2010, 11:00 PM

Quote:

Originally Posted by Julius@WSTO

the True 3" really refers to the body of the pipes. Some of the other brands have flat spots and "dents" for clearance whereas the Macht Schnell DP is 3" all the way from the turbo and tapers right at the end flange where it mates up to the exhaust piping.

sent you guys pm's on these.

we still have specials on the Macht Schnell products! Please feel free to give us a call at 312.880.7767

Can you please PM me your special pricing?

Thx
Dave

Victory Road · 12-21-2010, 07:55 PM

PM Sent,

Thanks again!

materialdistractions · 12-22-2010, 01:50 PM

Hi Julius,

Can you PM your special pricing on these.

Thanks,
Jay

Mrbig · 12-26-2010, 09:29 PM

Price shipped ?

Victory Road · 12-27-2010, 06:27 PM

Thanks guys,

Please check your PM's and make sure to save during our Holiday Specials!

09-10-2010, 12:55 AM	#1
Ryan@IND 1839 Rep 7,632 Posts Drives: ACR Join Date: Mar 2008 Location: Chicago iTrader: (18)	✚WHEELSTO \| Macht Schnell True 3" Down Pipes Ever since the introduction of Macht Schnell into the world of BMW, we have been big fan and advocate. Products are high quality and the beauty is in its simplicity of design and focus on function. Stock downpipes cause a major restriction in exhaust flow coupled with their small 57mm (2.25″) pipe diameter and numerous crush-bends with factory pre-cats squeezed in engine compartment. This results in excessive backpressure and excessive heat, which ultimately affects overall performance at all RPM loads. Macht Schnell’s 76.2mm (3.00″) N54 Catless Track Downpipes allow instantaneous turbo spooling and ultra-low backpressure proving significant hp/tq gains that can be felt immediately after installation. Mandrel-bent T304 Stainless Steel tubing is used to ensure constant exhaust flow is achieved by eliminating any restrictions, resulting in maximum gains and noticeable sound during turbo spooling. TIG-welded construction and Stainless Steel V-Band/catback flanges are durable as well as pleasing to the eyes. Heavy Duty exhaust gaskets and Stainless locking fasteners complete the package. Stainless O2 sensor bung locations are mounted in the factory locations while introducing additional stainless steel thermocouple bungs for those monitoring EGTs. Macht Schnell 3.0" Stainless Steel Down Pipe http://www.wstoshop.com/servlet/the-...ownpipe/Detail Downpipe Features: - 76.2mm overall diameter, eliminating restrictive factory pre-cats and crush bends - 100% T304 Stainless Steel construction, using mandrel bends - Precision TIG welded joints - Heavy-Duty Stainless V-Band/Exhaust flanges - Heavy-Duty locking fasteners and exhaust gaskets included - Factory O2 locations retained with Stainless Steel bungs - Pre-installed Stainless EGT bungs for easy thermocouple mounting - Reduced underhood temperatures Macht Schnell 3.0" Thermal Coated Down Pipe http://www.wstoshop.com/servlet/the-...ownpipe/Detail Downpipe Features: - 76.2mm overall diameter, eliminating restrictive factory pre-cats and crush bends - ThermalCoating reduces surface temperatures by as much as 54% - Meets U.S. military specification MIL-C-81751B for metallic-ceramic coatings, including FAA approval - 100% T304 Stainless Steel construction, using mandrel bends - Precision TIG welded joints - Heavy-Duty Stainless V-Band/Exhaust flanges - Heavy-Duty locking fasteners and exhaust gaskets included - Factory O2 locations retained with Stainless Steel bungs - Pre-installed Stainless EGT bungs for easy thermocouple mounting - Reduced underhood temperatures You can check out more Macht Schnell products HERE use coupon code: newsite5 to get 5% off + free shipping on these and other Macht Schnell products! How to Order or Get More Information: Click on the pictures to go to order online Call: 312.880.7767 Email: info@wheelsto.com PM the WheelSTO Crew: Julius ● Julius@WSTO Dave ● Dave@WSTO Support ● WheelSTO Last edited by Ryan@IND; 10-01-2010 at 07:28 PM..
	Appreciate 0 Tweet

09-16-2010, 11:26 PM	#2
sleepergm Lieutenant 51 Rep 541 Posts Drives: White 335i M-Tech Join Date: May 2007 Location: Hong Kong iTrader: (2)	Wow looks good ... just need some info. What is the shipping to Hong Kong? And will I throw a code with the downpipe due to O2 sensors? Also emmissions? Thanks
	Appreciate 0

09-17-2010, 03:20 PM	#3
UCF 335 Second Lieutenant 14 Rep 242 Posts Drives: Monaco 335i Sedan Join Date: Apr 2008 Location: Jax, FL iTrader: (2)	Price Shipped To 32708 Please!
	Appreciate 0

09-17-2010, 03:50 PM	#4
I335 Brigadier General 129 Rep 4,248 Posts Drives: '08 335i Coupe Join Date: Jan 2008 Location: New England iTrader: (11)	Can we get 'em w/HFCs coated too?
	Appreciate 0

09-18-2010, 06:05 PM	#5
wonsungnabi First Lieutenant 20 Rep 355 Posts Drives: E92 335 Join Date: Dec 2007 Location: Boston MA iTrader: (7)	Any plan for GB?
	Appreciate 0

09-26-2010, 12:05 AM	#7
ajaygill Private 5 Rep 63 Posts Drives: 2010 e92 335i DCT Join Date: Mar 2010 Location: Singapore iTrader: (1)	please pm me price shipped to singapore for ur downpipes range thanks
	Appreciate 0

10-14-2010, 10:02 PM	#9
sdstatestud88 Lieutenant 100 Rep 446 Posts Drives: 2017 MW F80 Join Date: Oct 2009 Location: San Jose iTrader: (1)	PM lowest price shipped to 92110 for thermal coated Thanks
	Appreciate 0

10-16-2010, 12:16 AM	#11
PKumarM3 Air India 147 Rep 1,834 Posts Drives: 2018 Dodge Durango Join Date: Dec 2007 Location: NJ iTrader: (8)	make downpipes that fit xi models! __________________ PKumarM3
	Appreciate 0

10-20-2010, 12:12 PM	#13
techlogik Lieutenant Colonel 71 Rep 1,568 Posts Drives: 2020 M340i Dravit Grey Join Date: Dec 2006 Location: FL iTrader: (2)	I don't understand what True 3" means? Doesn't it have to taper to 2.5" to fit the stock exhaust setup still? So it actually does still taper to 2.5"? __________________ 2020 M340i: Dravit Grey Mettalic. Loaded.
	Appreciate 0

10-21-2010, 10:06 PM	#15
vwown3d New Guy 23 Rep 319 Posts Drives: BMW Join Date: Jun 2010 Location: USA iTrader: (4)	Bump can I get a price for the non coated ones? Thanks!! __________________ Horsepower sells cars, Torque wins races
	Appreciate 0

10-22-2010, 09:53 AM	#16
VR46 Private 4 Rep 88 Posts Drives: First VTT stage 3 725whp Join Date: Oct 2010 Location: san francisco iTrader: (0)	Please pm price
	Appreciate 0

12-21-2010, 07:55 PM	#19
Victory Road Major 118 Rep 1,323 Posts Drives: BMW Join Date: Jun 2009 Location: Chicago, IL iTrader: (6)	PM Sent, Thanks again!
	Appreciate 0

12-22-2010, 01:50 PM	#20
materialdistractions Lieutenant 137 Rep 498 Posts Drives: F80 M3 Join Date: Mar 2007 Location: US iTrader: (11)	Hi Julius, Can you PM your special pricing on these. Thanks, Jay
	Appreciate 0

12-26-2010, 09:29 PM	#21
Mrbig Major 118 Rep 1,470 Posts Drives: 15 M3 Join Date: May 2007 Location: N.Y.C iTrader: (1)	Price shipped ?
	Appreciate 0

12-27-2010, 06:27 PM	#22
Victory Road Major 118 Rep 1,323 Posts Drives: BMW Join Date: Jun 2009 Location: Chicago, IL iTrader: (6)	Thanks guys, Please check your PM's and make sure to save during our Holiday Specials!
	Appreciate 0