Average whp/tq...? check in

Boostin335 · 10-06-2010, 06:35 PM

Hey guys, wondering what the average whp/tq for a mid bolt on car..

n54s that have these mods:

- DCI of some sort
- downpipes
- jb3 or procede v4 or equivalent (on a map that supports pump gas, dps, and is somewhat aggressive (basically a dd map that you would use for mild bolt ons)
- 91-93 octane
- stock exhaust (although I think a catback on these cars only adds maybe 5-8whp)

turb0mik3 · 10-06-2010, 06:41 PM

I would do fmic instead of downpipes. You don't want to run the risk of heat soaking your engine. With those, you mightt be looking at, conservatively, 50whp and 60trq. Just an estimate though. Need other things like a baseline dyno, but this is as rough as I can give.

Syndicategt · 10-07-2010, 06:48 AM

Probably around 300 rwhp on a DD map and 330-350 on higher setting. All cars are different, all dyno's are different, dyno's are only a good comparison tool so it would be to your advantage to get a baseline then run the car after mods.

Sniz · 10-07-2010, 10:25 AM

on a dynojet, maybe 350-365whp?

techlogik · 10-07-2010, 02:43 PM

Depends on the tune.

With my completely stock (drop-in filter only) setup and a Stage 1 GIAC, I gained just over 50rwhp/50rwtq.

Having some mods with a general tune like a GIAC would get you another 20-30rwhp.

A different tune with those mods running higher boost...380rwhp...Dynojet I am assuming. And of course, approximate...each dyno varies slightly.

Just a guess though..you won't know until you do it and get the dynos.

10-06-2010, 06:35 PM	#1
Boostin335 Lieutenant Colonel 759 Rep 1,817 Posts Drives: F92 M8, G82 M4, C8, MKIV Supra Join Date: Sep 2007 Location: North/Central NJ iTrader: (3)	Average whp/tq...? check in Hey guys, wondering what the average whp/tq for a mid bolt on car.. n54s that have these mods: - DCI of some sort - downpipes - jb3 or procede v4 or equivalent (on a map that supports pump gas, dps, and is somewhat aggressive (basically a dd map that you would use for mild bolt ons) - 91-93 octane - stock exhaust (although I think a catback on these cars only adds maybe 5-8whp)
	Appreciate 0 Tweet Quote

10-06-2010, 06:41 PM	#2
turb0mik3 247 Rep 2,781 Posts Drives: E90 335i Racecar Join Date: Jan 2010 Location: San Diego, CA iTrader: (1) Garage List 2010 BMW 335i [8.90]	I would do fmic instead of downpipes. You don't want to run the risk of heat soaking your engine. With those, you mightt be looking at, conservatively, 50whp and 60trq. Just an estimate though. Need other things like a baseline dyno, but this is as rough as I can give. __________________ HG Motorsports \| Motiv Motorsport \| Sparta Evolution \| BBS Motorsports \| Sabelt \| JRZ \| NASA ST1 SoCal --- 554whp/487wtrq --- 3200lbs <<YouTube Channel w/ Race Videos>>
	Appreciate 0 Quote

10-07-2010, 06:48 AM	#3
Syndicategt Brigadier General 164 Rep 3,730 Posts Drives: 335i Join Date: Sep 2009 Location: Nor Cal iTrader: (11)	Probably around 300 rwhp on a DD map and 330-350 on higher setting. All cars are different, all dyno's are different, dyno's are only a good comparison tool so it would be to your advantage to get a baseline then run the car after mods. __________________ 2008 BMW 335i e90 - Sold - Rob Beck Turbos / PROcede V5 / Aquamist HFS-4 / AR Downpipes / AE Exhaust / ER Comp FMIC / ER CP / TiAL BOV / Custom Intake / RPI Scoops / Quaife LSD / Swift-Koni Coilovers / DSS HS / Morr VS8.2 Sig Black / Michelin PSS / P3 Boost Guage / M3 body / M3 steering wheel / Adam's Rotors / Hawk HPS / SS lines /
	Appreciate 0 Quote

10-07-2010, 10:25 AM	#4
Sniz Lieutenant General 682 Rep 10,584 Posts Drives: e92 335 - gone // e36 M3 turbo Join Date: Mar 2007 Location: Ellicott City, MD iTrader: (1)	on a dynojet, maybe 350-365whp? __________________
	Appreciate 0 Quote

10-07-2010, 02:43 PM	#5
techlogik Lieutenant Colonel 71 Rep 1,568 Posts Drives: 2020 M340i Dravit Grey Join Date: Dec 2006 Location: FL iTrader: (2)	Depends on the tune. With my completely stock (drop-in filter only) setup and a Stage 1 GIAC, I gained just over 50rwhp/50rwtq. Having some mods with a general tune like a GIAC would get you another 20-30rwhp. A different tune with those mods running higher boost...380rwhp...Dynojet I am assuming. And of course, approximate...each dyno varies slightly. Just a guess though..you won't know until you do it and get the dynos. __________________ 2020 M340i: Dravit Grey Mettalic. Loaded.
	Appreciate 0 Quote