|
|
|
|
 |
 
|
 |
BMW Garage | BMW Meets | Register | Today's Posts | Search |
 |
|
BMW 3-Series (E90 E92) Forum
>
HPA Quick Change Rear Spring Kit
|
 |
| 11-09-2010, 03:59 PM | #1 |
|
Supreme Allied Commander
 
4091
Rep 55,822
Posts
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com
|
HPA Quick Change Rear Spring Kit
This kit allows the user to change spring rates at home or the track in minutes, without disconnecting the lower control arm and without performing another wheel alignment as long as the ride height remains the same.
This kit not only allows you to change your springs very quickly, it also allows you to adjust the ride height of the vehicle with the springs installed. YES! With the springs installed. No need to remove the springs! Most E82/9X coilover kits on the market today, you must unload the spring tension to adjust the rear ride height, but not ours! What is in the kit: HPA Rear Ride Height Adjusters BMW Sealed Radial Thrust Bearings(used on the top of the main spring) Swift Main and Helper springs Swift Thrust Sheets(use at the lower portion of the spring, between the helper and the control arm) $579.95 Order here: http://www.hpashop.com/HPA-Quick-Cha...?categoryId=-1 Last edited by HP Autosport; 01-03-2017 at 05:37 PM.. |
|
|
| 08-16-2011, 11:39 PM | #2 |
|
Supreme Allied Commander
4091
Rep 55,822
Posts
Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com
|
Those who like to tinker with spring rates. This is the best kit out there for fast and easy spring chages.
|
|
Appreciate
0
|
 |
| Bookmarks |
|
|
