Where to find Stainless Steel 90degree -8 AN fittings..

b1gmac88 · 12-30-2010, 01:08 PM

As the title says.. I cant find stainless steel for the life of me.

BerkTechnology · 12-30-2010, 01:35 PM

-8 to what? NPT? hose end?

ExpensiveTaste · 12-30-2010, 02:20 PM

Ya, you kinda need what the other end is. Summitracing is where I get all mine...

taylors335 · 12-30-2010, 02:25 PM

Quote:

Originally Posted by BerkTechnology

-8 to what? NPT? hose end?

the ones you guys use at berk can be the aluminum on your 135 you have the clearance on the 335 you need to custom make them !

taylors335 · 12-30-2010, 02:27 PM

Quote:

Originally Posted by b1gmac88

As the title says.. I cant find stainless steel for the life of me.

I believe i spoke with you over PM there is a place here in San Diego that you can get double ended -8 stainless fittings and like i stated in my DIY you cut one end off and Tig weld it to the oem plug after you drill it !!! The name of the store is Industrial Liquidators

b1gmac88 · 12-30-2010, 05:19 PM

^ Itll be to either a male -8 thread or a Hose end.. the other end doesnt matter since im going to cut it off an weld something else on there.

I called Industrial Liquidators and they said they dont have it in Stainless steel.

BerkTechnology · 12-30-2010, 07:47 PM

If you really want it I can order them in stainless for you. For something like an oil cooler fitting that is way on top of the motor that won't see dirt & rocks, your run of the mill plated steel connector will be fine. Just wire brush it off on the area you are going to weld to first and TIG away.

Just copy my setup on our AR Design custom built oil cooler but keep in mind that the 3 series hood slopes down more than the 135i hood.

12-30-2010, 01:08 PM	#1
b1gmac88 Captain 91 Rep 953 Posts Drives: 335i e92 Join Date: Jan 2008 Location: E Coast iTrader: (16)	Where to find Stainless Steel 90degree -8 AN fittings.. As the title says.. I cant find stainless steel for the life of me.
	Appreciate 0 Tweet Quote

12-30-2010, 01:35 PM	#2
BerkTechnology Lieutenant Colonel 228 Rep 1,565 Posts Drives: Fast Join Date: May 2008 Location: Irvine, CA iTrader: (1)	-8 to what? NPT? hose end?
	Appreciate 0 Quote

12-30-2010, 02:20 PM	#3
ExpensiveTaste Poor Kid with Dreams 29 Rep 702 Posts Drives: BSM 07 E90 335xi Join Date: Aug 2010 Location: Danbury, CT iTrader: (4)	Ya, you kinda need what the other end is. Summitracing is where I get all mine... __________________ '07 BSM 335xi JB4, DCI, CX Racing I/C, ER Chargepipe, Meth, KW V3 - Pending Sale '95 Mustang GTS 347ci Ported TFS TW Heads,Custom Cam,Victor 5.0 IM,Tubular Front Suspension,Full Exhaust,Big and Littles
	Appreciate 0 Quote

12-30-2010, 05:19 PM	#6
b1gmac88 Captain 91 Rep 953 Posts Drives: 335i e92 Join Date: Jan 2008 Location: E Coast iTrader: (16)	^ Itll be to either a male -8 thread or a Hose end.. the other end doesnt matter since im going to cut it off an weld something else on there. I called Industrial Liquidators and they said they dont have it in Stainless steel.
	Appreciate 0 Quote

12-30-2010, 07:47 PM	#7
BerkTechnology Lieutenant Colonel 228 Rep 1,565 Posts Drives: Fast Join Date: May 2008 Location: Irvine, CA iTrader: (1)	If you really want it I can order them in stainless for you. For something like an oil cooler fitting that is way on top of the motor that won't see dirt & rocks, your run of the mill plated steel connector will be fine. Just wire brush it off on the area you are going to weld to first and TIG away. Just copy my setup on our AR Design custom built oil cooler but keep in mind that the 3 series hood slopes down more than the 135i hood.
	Appreciate 0 Quote