E90Post
 


Coby Wheel
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > Another low budget custom exhaust 335I Sedan



Reply
 
Thread Tools Search this Thread
      01-21-2011, 04:50 PM   #1
1BAD535
6th Hokage
1BAD535's Avatar
8
Rep
161
Posts

Drives: 335I, 03 & 97 SC Cobras, S14,
Join Date: Jun 2007
Location: Sylmar, CA

iTrader: (3)

Lightbulb Another low budget custom exhaust 335I Sedan

Hi Guys,

For a while i've been looking on youtube for exhaust clips, couldn't really make up my mind, plus i am not willing to pay for the overpriced exhaust systems available. I cannot justify paying 1k+ for parts that will cost that vendor a measly $250, i understand that the price is related to the fitment and dyno results/design the vendor made, but im cheap, so anyhow, my system will be a weird one .

There are a lot of different thought out there on using an x pipe resulting in loss of power, but i dont care, i could care less about 2-3 rwhp, i've always loved the tone an x pipe gives, nice and quiet on the low end, and when u get on it, sound loud and screaming nice and it will flow, i used x pipes in my mustang cobras and achieve more than 500 RWHP in a dual 2.5 inch exhaust system with an x pipe. i understand my cobra is a v8 supercharged and doesn't not have turbos so the results may be a little different, but i dont care im crazy.

I've also seen that people use the x near the rear end right where the resonator was at, and they use the mufflers at the end near the exhaust tips.
I plan on making my design similar to my 03 cobra, gonna put the x near the front, mufflers about where the stock secondary cat is at.
Im gonna keep my resonators and rear mufflers, then after a couple of days, keep the resonator and remove rear mufflers, then after couple more days remove the resonator at the end, this way i can see which setup/tone i like the best.

Ill post videos and pictures,

I just got my x pipe in today
__________________

JB3, Dual K&N Cones, Raceland DP's, Mickey Thomsons Et Street Drag Radials 245/40/18
best time
12.145@115.62
1.790 60 ft
Appreciate 0
      01-21-2011, 05:33 PM   #2
Doug007
Second Lieutenant
United_States
6
Rep
291
Posts

Drives: Spacegrau 2009 335i 6MT
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

The X pipe probably won't make a hell of a lot of difference.

You may be disappointed in the sound. On N/A or supercharged cars managing the exhaust pulses is very important to both power and sound.

On a turbo car all those exhaust pulses get smoothed out going through the turbine. From the exhaust of the turbo you want the minimum backpressure possible to help the turbo spool quickly and move exhaust gas through the turbo.

It's definitely not going to sound anything like a mustang cobra!
__________________

2009 Spacegrau 335i
Appreciate 0
      01-21-2011, 05:37 PM   #3
Forcefed3
Banned
No_Country
131
Rep
4,732
Posts

Drives: 2008 335i
Join Date: May 2010
Location: South

iTrader: (2)

Garage List
2008 335i  [1.00]
I have a buddy that welds, I am thinking of making a 3" system like the HPF exhaust with a resonator. Tell us how it goes.
Appreciate 0
      01-21-2011, 05:41 PM   #4
1BAD535
6th Hokage
1BAD535's Avatar
8
Rep
161
Posts

Drives: 335I, 03 & 97 SC Cobras, S14,
Join Date: Jun 2007
Location: Sylmar, CA

iTrader: (3)

Quote:
Originally Posted by Doug007 View Post
The X pipe probably won't make a hell of a lot of difference.

You may be disappointed in the sound. On N/A or supercharged cars managing the exhaust pulses is very important to both power and sound.

On a turbo car all those exhaust pulses get smoothed out going through the turbine. From the exhaust of the turbo you want the minimum backpressure possible to help the turbo spool quickly and move exhaust gas through the turbo.

It's definitely not going to sound anything like a mustang cobra!
You got a good point,
Im going to be using flowmaster 3" outlaw mufflers. backpressure will definitely be minimum, i dont think no one has done a setup like this, so its gonna be interesting,, or it might just sound like the muffler deletes with straight pipe people do. ill have to find out by trying it out
__________________

JB3, Dual K&N Cones, Raceland DP's, Mickey Thomsons Et Street Drag Radials 245/40/18
best time
12.145@115.62
1.790 60 ft
Appreciate 0
      01-22-2011, 03:40 PM   #5
1BAD535
6th Hokage
1BAD535's Avatar
8
Rep
161
Posts

Drives: 335I, 03 & 97 SC Cobras, S14,
Join Date: Jun 2007
Location: Sylmar, CA

iTrader: (3)

Just got my mufflers today



__________________

JB3, Dual K&N Cones, Raceland DP's, Mickey Thomsons Et Street Drag Radials 245/40/18
best time
12.145@115.62
1.790 60 ft
Appreciate 0
      01-22-2011, 06:00 PM   #6
e90fun
('''\(;,,,;)/''')
e90fun's Avatar
86
Rep
1,682
Posts

Drives: AW 335i e90
Join Date: Jul 2009
Location: San Diego, CA / Santa Rosa, CA

iTrader: (14)

oh god, drone incoming.
i have the magnaflows that look like that and i drone quit a bit.
nothing some music cant solve right?
__________________
Stock 08` Alpine White E90 335i
Appreciate 0
      01-22-2011, 06:02 PM   #7
kmoto
vroom
kmoto's Avatar
68
Rep
1,032
Posts

Drives: Grocery Getter
Join Date: Oct 2010
Location: Torrance

iTrader: (4)

Garage List
2023 G80 M3 Comp  [0.00]
2020 F82 M4  [0.00]
2018 BMW 440i  [0.00]
2015 BMW 328i  [0.00]
2007 335i e92  [10.00]
Quote:
Originally Posted by e90fun View Post
oh god, drone incoming.
i have the magnaflows that look like that and i drone quit a bit.
nothing some music cant solve right?
So if your MagnaFlow's look like the OP's mufflers, I'm assuming you have the glass packs?
Appreciate 0
      01-22-2011, 06:34 PM   #8
e90fun
('''\(;,,,;)/''')
e90fun's Avatar
86
Rep
1,682
Posts

Drives: AW 335i e90
Join Date: Jul 2009
Location: San Diego, CA / Santa Rosa, CA

iTrader: (14)

Quote:
Originally Posted by kmoto335i View Post
So if your MagnaFlow's look like the OP's mufflers, I'm assuming you have the glass packs?
i have something like this:
http://www.magnaflow.com/02product/s...e=main&id=9175
i mean they sound pretty mean but it does drone at arond 2.2k.
ive gotten used to it.
__________________
Stock 08` Alpine White E90 335i
Appreciate 0
      01-22-2011, 09:04 PM   #9
1BAD535
6th Hokage
1BAD535's Avatar
8
Rep
161
Posts

Drives: 335I, 03 & 97 SC Cobras, S14,
Join Date: Jun 2007
Location: Sylmar, CA

iTrader: (3)

I don't think it would drone because I'm not using a mesh wrap type muffler, these flowmasters have chamber style walls, which mimic their popular 2 Chamber mufflers without an actual chamber blocking the flow.
__________________

JB3, Dual K&N Cones, Raceland DP's, Mickey Thomsons Et Street Drag Radials 245/40/18
best time
12.145@115.62
1.790 60 ft
Appreciate 0
      01-23-2011, 05:08 PM   #10
1BAD535
6th Hokage
1BAD535's Avatar
8
Rep
161
Posts

Drives: 335I, 03 & 97 SC Cobras, S14,
Join Date: Jun 2007
Location: Sylmar, CA

iTrader: (3)

Just got the x pipe & mufflers installed, it sounds just like a G35, so far so good i like the tone this setup produces, just have to wait for 2 4" black chrome tips I bought, then I'll remove the rear stock mufflers and see what it really sound like.
__________________

JB3, Dual K&N Cones, Raceland DP's, Mickey Thomsons Et Street Drag Radials 245/40/18
best time
12.145@115.62
1.790 60 ft
Appreciate 0
      01-23-2011, 07:45 PM   #11
Naptime
#Hashtag
Naptime's Avatar
10
Rep
245
Posts

Drives: around in circles
Join Date: Jan 2011
Location: South Texas

iTrader: (1)

Any pics?
Appreciate 0
      01-23-2011, 07:49 PM   #12
shockin330i
Brigadier General
shockin330i's Avatar
807
Rep
4,784
Posts

Drives: 2016 ZCP M3
Join Date: Jan 2007
Location: f y'all, I'm from Texas (RGV)

iTrader: (1)

in for pics
__________________
ERnie
2016 BSM/f80/ZCP
Appreciate 0
      01-24-2011, 09:31 PM   #13
1BAD535
6th Hokage
1BAD535's Avatar
8
Rep
161
Posts

Drives: 335I, 03 & 97 SC Cobras, S14,
Join Date: Jun 2007
Location: Sylmar, CA

iTrader: (3)

Kinda hard to get under the car but here some pics


__________________

JB3, Dual K&N Cones, Raceland DP's, Mickey Thomsons Et Street Drag Radials 245/40/18
best time
12.145@115.62
1.790 60 ft
Appreciate 0
      01-24-2011, 09:34 PM   #14
Javier
Major
Javier's Avatar
Puerto Rico
89
Rep
1,109
Posts

Drives: 335i E92
Join Date: Nov 2006
Location: Puerto Rico

iTrader: (0)

video?
__________________
2007 328i Crimson Red *SOLD*
2010 335i MSport AW E92
Appreciate 0
      01-24-2011, 10:53 PM   #15
taylors335
Major
taylors335's Avatar
United_States
29
Rep
1,183
Posts

Drives: Space Grey 08 335i
Join Date: Jan 2010
Location: san diego

iTrader: (1)

Garage List
2008 335i  [7.00]
no offense but did the guy who installed that know how to weld ?
Appreciate 0
      01-24-2011, 11:02 PM   #16
1BAD535
6th Hokage
1BAD535's Avatar
8
Rep
161
Posts

Drives: 335I, 03 & 97 SC Cobras, S14,
Join Date: Jun 2007
Location: Sylmar, CA

iTrader: (3)

Quote:
Originally Posted by taylors335 View Post
no offense but did the guy who installed that know how to weld ?
I've got no exhaust leaks. So I guess he must have, seems kinda tight in there don't know how he did it, I was on my phone whatching a movie (-:
__________________

JB3, Dual K&N Cones, Raceland DP's, Mickey Thomsons Et Street Drag Radials 245/40/18
best time
12.145@115.62
1.790 60 ft
Appreciate 0
      01-24-2011, 11:05 PM   #17
hipnotic
Major General
hipnotic's Avatar
United_States
153
Rep
6,603
Posts

Drives: e92 335i
Join Date: Oct 2007
Location: So. Cal

iTrader: (7)

Garage List
2008 335i coupe  [7.00]
videos please?
Appreciate 0
      01-24-2011, 11:07 PM   #18
1BAD535
6th Hokage
1BAD535's Avatar
8
Rep
161
Posts

Drives: 335I, 03 & 97 SC Cobras, S14,
Join Date: Jun 2007
Location: Sylmar, CA

iTrader: (3)

Quote:
Originally Posted by josh06lau View Post
videos please?
I'll have a video soon (-:
__________________

JB3, Dual K&N Cones, Raceland DP's, Mickey Thomsons Et Street Drag Radials 245/40/18
best time
12.145@115.62
1.790 60 ft
Appreciate 0
      01-24-2011, 11:22 PM   #19
texas2009
Sure, it's just a sedan...
texas2009's Avatar
8
Rep
150
Posts

Drives: 2007 BMW 335i
Join Date: Jun 2010
Location: Houston, TX

iTrader: (0)

Moo

I specifically asked how to get the G35 sound from my 335i, and I was told this:

Quote:
Originally Posted by granadablanca View Post
Hmm, drive out to a farm & record the sounds of cow giving birth, and play it really loud on your stereo? That's probably the best way to reproduce the Nissan exhaust tone.

Needless to say, I hate it. I hear it echoing through the streets at all hours, it somehow carries for miles, sounds exactly like a cow to me.

I know, real helpful post. I couldn't resist.
I can't wait to hear how yours turns out. Subscribed.

Here's my original post: http://www.e90post.com/forums/showthread.php?t=397303
__________________
Chris | '07 335i
Appreciate 0
      01-25-2011, 12:51 AM   #20
Cozmos
Private
0
Rep
74
Posts

Drives: e90 335i, e36 M3
Join Date: Nov 2010
Location: Portland, OR

iTrader: (0)

Quote:
Originally Posted by e90fun View Post
oh god, drone incoming.
i have the magnaflows that look like that and i drone quit a bit.
nothing some music cant solve right?
Do you have those after the resonators, or a resonator delete as well? I'm thinking of putting those on post resonators.
Appreciate 0
      01-28-2011, 10:53 AM   #21
1BAD535
6th Hokage
1BAD535's Avatar
8
Rep
161
Posts

Drives: 335I, 03 & 97 SC Cobras, S14,
Join Date: Jun 2007
Location: Sylmar, CA

iTrader: (3)

Stock


Flowmaster outlaw mufflers, X pipe, Stock Resonator, Stock Downpipes


Flowmaster outlaw mufflers, X pipe, No Resonator, Stock Downpipes
__________________

JB3, Dual K&N Cones, Raceland DP's, Mickey Thomsons Et Street Drag Radials 245/40/18
best time
12.145@115.62
1.790 60 ft

Last edited by 1BAD535; 01-28-2011 at 11:00 AM..
Appreciate 0
      01-28-2011, 11:05 AM   #22
tscdennab
Banned
156
Rep
1,809
Posts

Drives: BMW 335i
Join Date: Oct 2010
Location: Europe

iTrader: (0)

Garage List
2008 BMW  [6.24]
The sound is ok, but do you still have the stock mufflers in place even in the last video ?
Appreciate 0
Reply

Bookmarks

Tags
custom, exhaust


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 01:32 PM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST