[AlexRo]

advise me please. I am driving an e90 w/o navigation and i want to buy dynavin e9x. It is a good deal?

[SV Concepts III]

It's a solid product if you don't have navi. The software is more flexible than the OE unit and can be upgraded. You also don't have to replace the dash as this sits in place of the factory headunit. You are getting a lot more features over the stock setup including SD card slot, upgradable nav, 3G capabilities, bluetooth, back up camera compatible etc...

Here is a video we shot of the functionality for you:

[AlexRo]

thank you! i've read some opinion around this forum and i definitely won't buy Hualingan. I was prepared to order one Hualingan unit. I will post photo's when my car will have dynavin

[M BROK3]

Originally Posted by AlexRo

thank you! i've read some opinion around this forum and i definitely won't buy Hualingan. I was prepared to order one Hualingan unit. I will post photo's when my car will have dynavin

just make sure you don't have Logic 7, dynavin doesn't work with it YET.

[AlexRo]

i dont have , i have the lowet audio sistem

[ctuna]

The audio board has a couple of large dynavin threads
Quite extensive ones even showing how to install

The problem with putting any aftermarket head in is you loose
BMW Assist , bluetooth , ipod and break the Most Bus.

And the major one is that you can't get BMW software updates
after messing with the Most Bus and Can Bus
Some people mount there original head unit somewhere else in the
car to overcome this but its not an elegant solution.

http://www.e90post.com/forums/forumdisplay.php?f=27

[AlexRo]

hmmm any other problems? i have 4 years warranty on the bmw service. i will loose the warranty?

[ctuna]

http://www.e90post.com/forums/showthread.php?t=469709

the last entry

I really wished this thing or something else like it worked flawlessly
without side issues
but that doesn't seem to be the case.

[AlexRo]

can i use the rear camera for front view if i mount it here?

with dynavin "rear" camera

[GlowIMG]

Hi Guys,

I am new to this forum and to BMW. I have recently purchased a Dynavin unit for my E90 and its all working well except for the memory.
Every morning I turn on the car all my presets have gone!
I think this is an issue with the 12v 'constant supply', does anyone know which fuse the spade connector must be attached to to prevent this memory loss?

HELP!!!!

[Misturrtinnie]

Originally Posted by x-ception

just make sure you don't have Logic 7, dynavin doesn't work with it YET.

When are they gonna be coming out with a dynavin that has a fiber optic output?... I would pay so much for this...

[320beemer]

Originally Posted by GlowIMG

Hi Guys,

I am new to this forum and to BMW. I have recently purchased a Dynavin unit for my E90 and its all working well except for the memory.
Every morning I turn on the car all my presets have gone!
I think this is an issue with the 12v 'constant supply', does anyone know which fuse the spade connector must be attached to to prevent this memory loss?

HELP!!!!

The yellow wire needs to be attached to a continuous power in the fuse box

Read this manual..
http://www.caraudiocraze.com/E90-Install-Guide1.0.pdf