SWS-8 Installation Questions

pkirk · 02-03-2011, 01:11 PM

In the DIY forum azwillnj posted a nice installation guide for SWS-8 as replacement of OEM underseat sub. http://www.e90post.com/forums/showthread.php?t=163804

This forum is a better place for my questions and was hoping someone could help me better understand 2 things:

1) A plastic frame came with my SWS-8 speakers (see below). Is that used in the installation? If so, under or above the speaker flange? If under then does it raise the speaker enough to avoid the grinding procedure specified in the DIY guide?

2) I noticed that the author of this DIY chose not to reinstall the speaker grates becuase there are some issues with fit, which require spacers to ensure no interference during operation.

What are some thoughts on this? I think it is a good thing for avoiding rattles or interference from the grate, but what about the potential for larger dirt/debris contacting the speaker.

Is this really something to worry about or is it considered no problem becuase it is back away from the part of the carpet that feet and debris contact?

Technic · 02-03-2011, 02:10 PM

You do not use that SWS-8 frame: you can either break the ribs (if any) in the bottom of your OEM enclosure so your SWS-8 can be installed without requiring a spacer or you can get a jtsherri spacer here: http://www.e90post.com/forums/showthread.php?t=314849

pkirk · 02-03-2011, 03:21 PM

Quote:

Originally Posted by Technic

You do not use that SWS-8 frame: you can either break the ribs (if any) in the bottom of your OEM enclosure so your SWS-8 can be installed without requiring a spacer or you can get a jtsherri spacer here: http://www.e90post.com/forums/showthread.php?t=314849

Wouldn't the SWS-8 frame act as a spacer just like jtsherri's is underneath the flange? I am assuming there is some reason it won't work??

Any opinion on leaving off the speaker grill?

slade1274 · 02-03-2011, 08:36 PM

The hole for the stock access plug needs to be covered to utilize the enclosure as it was designed...... I did mine out of mdf and used foam weather strip to ensure the seal.

pkirk · 02-03-2011, 10:02 PM

Quote:

Originally Posted by slade1274

The hole for the stock access plug needs to be covered to utilize the enclosure as it was designed...... I did mine out of mdf and used foam weather strip to ensure the seal.

Nice job - thanks for sharing!

What thickness MDF did you use? Did it make it so that you didn't need to file the bottom of the enclosure?

Did you install the grill? If so did you add spacers underneath the grill?

slade1274 · 02-03-2011, 10:38 PM

1/2" MDF

Partly, but the other part was to enclose the hole that would have been left by the stock wire clip

Grill fits well, but had to trim the floor pad for driver clearance.... this is a 135i though; pretty sure they are the same part numbers so it should be a mute point.

kaigoss69 · 02-03-2011, 11:39 PM

You guys with these fancy ass router setups make me sick

mech888 · 02-04-2011, 02:22 PM

Where are you guys getting the best prices on the sws8s??

slade1274 · 02-04-2011, 02:55 PM

PM VP Electricity as he indicates he can match prices.

pkirk · 02-04-2011, 08:26 PM

Quote:

Originally Posted by mech888

Where are you guys getting the best prices on the sws8s??

Check ebay:

Lots of options for $99 ea including shipping from sonicelectronix. This is a really good price. I bought through thier website last week for $111 ea

Didn't find anything good listed on ebay at the time.

VP Electricity · 02-05-2011, 12:42 PM

Uh, prices for 4 and 2 ohm on eBay usually differ. And add in shipping.

We sell a kit with metal rings to solve that sizing problem.

02-03-2011, 01:11 PM	#1
pkirk Private First Class 5 Rep 149 Posts Drives: 2008 328XI Join Date: Dec 2010 Location: Manchester, NH iTrader: (0)	SWS-8 Installation Questions In the DIY forum azwillnj posted a nice installation guide for SWS-8 as replacement of OEM underseat sub. http://www.e90post.com/forums/showthread.php?t=163804 This forum is a better place for my questions and was hoping someone could help me better understand 2 things: 1) A plastic frame came with my SWS-8 speakers (see below). Is that used in the installation? If so, under or above the speaker flange? If under then does it raise the speaker enough to avoid the grinding procedure specified in the DIY guide? 2) I noticed that the author of this DIY chose not to reinstall the speaker grates becuase there are some issues with fit, which require spacers to ensure no interference during operation. What are some thoughts on this? I think it is a good thing for avoiding rattles or interference from the grate, but what about the potential for larger dirt/debris contacting the speaker. Is this really something to worry about or is it considered no problem becuase it is back away from the part of the carpet that feet and debris contact? Attached Images
	Appreciate 0 Tweet Quote

02-03-2011, 02:10 PM	#2
Technic Lieutenant General 2470 Rep 13,132 Posts Drives: 2025 Countryman S, 2024 i4 M50 Join Date: Apr 2005 Location: Florida iTrader: (18)	You do not use that SWS-8 frame: you can either break the ribs (if any) in the bottom of your OEM enclosure so your SWS-8 can be installed without requiring a spacer or you can get a jtsherri spacer here: http://www.e90post.com/forums/showthread.php?t=314849
	Appreciate 0 Quote

02-03-2011, 08:36 PM	#4
slade1274 Tinkerer 5 Rep 79 Posts Drives: 21 M2C Join Date: Jul 2008 Location: St. Petersburg, Fl iTrader: (1)	The hole for the stock access plug needs to be covered to utilize the enclosure as it was designed...... I did mine out of mdf and used foam weather strip to ensure the seal.
	Appreciate 0 Quote

02-03-2011, 10:38 PM	#6
slade1274 Tinkerer 5 Rep 79 Posts Drives: 21 M2C Join Date: Jul 2008 Location: St. Petersburg, Fl iTrader: (1)	1/2" MDF Partly, but the other part was to enclose the hole that would have been left by the stock wire clip Grill fits well, but had to trim the floor pad for driver clearance.... this is a 135i though; pretty sure they are the same part numbers so it should be a mute point.
	Appreciate 0 Quote

02-03-2011, 11:39 PM	#7
kaigoss69 Brigadier General 301 Rep 3,969 Posts Drives: '08 335i Join Date: Jul 2008 Location: JAX iTrader: (6)	You guys with these fancy ass router setups make me sick __________________ Mobridge DA2 > JBL MS-8 > ARC XDi 600/4 > JBL Gti 408 Mids & Vifa OT19 Tweeters; PG Ti2 1600.5 > Morel HCW-10 & IDMax 15
	Appreciate 0 Quote

02-04-2011, 02:22 PM	#8
mech888 Second Lieutenant 7 Rep 292 Posts Drives: 320i & 335i Join Date: May 2007 Location: West Palm Beach iTrader: (5)	Where are you guys getting the best prices on the sws8s?? __________________ 2016 M2 Gone 2014 320i Gone 2009 335i Gone 2011 328i Gone 2009 335i Gone
	Appreciate 0 Quote

02-04-2011, 02:55 PM	#9
slade1274 Tinkerer 5 Rep 79 Posts Drives: 21 M2C Join Date: Jul 2008 Location: St. Petersburg, Fl iTrader: (1)	PM VP Electricity as he indicates he can match prices.
	Appreciate 0 Quote

02-05-2011, 12:42 PM	#11
VP Electricity Brigadier General 294 Rep 3,201 Posts Drives: F34 xDrive Join Date: Jan 2008 Location: portland oregon iTrader: (3)	Uh, prices for 4 and 2 ohm on eBay usually differ. And add in shipping. We sell a kit with metal rings to solve that sizing problem.
	Appreciate 0 Quote