FS - BMW M3 Instrument cluster gauge VERY RARE!!!

raf555 · 02-11-2011, 01:45 PM

BIMMERPOST / Classifieds

Asking Price:

None

Item Interest

I am selling an euro spec M3 instrument cluster taken from a 2009 M3 (date of manufacture is 03.07.09)

This one also has dashed holes on top of the revs cluster ring (where i believe the lights glow up as you move up the revs!)

Theses are very rare and one of the coolest mods you can do.

This is an original M3 cluster. You need to have it coded for your car, obviously, but this is not difficult to do - there are several people on this forum who will do it for varying amounts of money.

Once coded, it's a PLUG AND PLAY install, i.e. you swap the cluster and you're done.

Or you can strip it and just take out the needles and all that stuff and keep your OEM cluster. People have done that too.

The Part No. is 62107842380. Tischer sells it for $925 new.

It is in very good condition overall but does have a few light marks on the screen, which in my opinion are not that noticeable.

I am looking at $460 USD shipped (plus paypal fees or send as gift to avoid them!)

1QuikWS6 · 02-11-2011, 07:23 PM

Just outta curiosity, I always wondered home these retrofit properly in a newer, non M3 BMW with regards to the oil temp gage.

My gage has 250 degress at center, which is where it runs close to during summer months.

This cluster only goes to 150 deg max...

JonLerd · 02-12-2011, 02:56 AM

Quote:

Originally Posted by 1QuikWS6

Just outta curiosity, I always wondered home these retrofit properly in a newer, non M3 BMW with regards to the oil temp gage.

My gage has 250 degress at center, which is where it runs close to during summer months.

This cluster only goes to 150 deg max...

your gauge is 250 F the euro gauge is 150C...ranges is about the same

STONEY_M5 · 02-12-2011, 08:38 PM

would all of the features work, including the shift lights, digital speedo and so forth???

raf555 · 02-12-2011, 09:14 PM

Quote:

Originally Posted by M335i Oreo Package

would all of the features work, including the shift lights, digital speedo and so forth???

once coded, i believe so.

thanks

raf555 · 02-15-2011, 02:06 PM

here is an example from you tube of the effect of lights glowing up through the dashed holes on top of the revs cluster....

tofu- · 02-15-2011, 02:16 PM

Quote:

Originally Posted by M335i Oreo Package

would all of the features work, including the shift lights, digital speedo and so forth???

even if they did work, would they be useless since the m3 has a different redline?

also, we need to short shift our cars for the sweet spot

raf555 · 02-15-2011, 02:37 PM

Quote:

Originally Posted by tofu-

even if they did work, would they be useless since the m3 has a different redline?

also, we need to short shift our cars for the sweet spot

no because u can adjust the revs required to reach the red line through coding.

Dackelone · 02-15-2011, 02:43 PM

Op - I believe the part you have is for a DCT M3. 6MT car use a different cluster from what I can see on RealOEM.com

http://www.realoem.com/bmw/showparts...2&fg=05&hl=159

It also looks like BMW makes several clusters. DCT, 6MT, KPH, MPH & KPH, ect...

I met a guy who does coding over here in DE. He told me he can do this to any BMW. The a hardest part is getting a cluster. Then you just need someone to code the cluster which he said he charges about 140 euros - IF I remember right.

Here is his 135i with a M3 cluster in it. Everything works except the rpm lights in the tach ring. But the rpm yellow/red band does move up and down - for warmup. Just the redline lights don't work.

I had my 135i cluster coded for the M3 digital speedo & also for it to reflect TRUE vehicle speed instead of the OE "buffered" value (+3 -5% higher).

Dackel

raf555 · 02-16-2011, 01:21 PM

thanks for the info dackel.

well the hardest part is not a problem as im selling the actual cluster!

1QuikWS6 · 02-17-2011, 02:48 PM

Quote:

Originally Posted by JonLerd

your gauge is 250 F the euro gauge is 150C...ranges is about the same

Duh - and how stupid was I for missin that?

raf555 · 02-18-2011, 06:36 PM

bump

Dackelone · 02-18-2011, 06:39 PM

Btw... does anyone know what that "green car" icon is for in my first M3 tach cluster pic? PDC maybe?

Bavarian Tech · 02-19-2011, 11:40 AM

Active Cruise I'm pretty sure

raf555 · 02-26-2011, 12:34 PM

bump

skinrock · 02-27-2011, 04:04 AM

Would this fit/work in a 2007 335i auto?

raf555 · 02-27-2011, 07:30 AM

Quote:

Originally Posted by skinrock

Would this fit/work in a 2007 335i auto?

cant see why not!

skinrock · 02-27-2011, 06:39 PM

Quote:

Originally Posted by raf555

cant see why not!

Just wondering since the shift lights don't work in the 135i. Would those work in mine? Also, are the gauges white or amber when lit up?

raf555 · 02-27-2011, 06:41 PM

Quote:

Originally Posted by skinrock

Just wondering since the shift lights don't work in the 135i. Would those work in mine? Also, are the gauges white or amber when lit up?

personally i couldnt tell u but best to research on here as quite a few members have done the m3 cluster conversion.

the dials light up white.

cheers

raf555 · 02-27-2011, 06:47 PM

been done on you tube>>>?

and i belive he is a forum member, drop him a line...

http://www.e90post.com/forums/member.php?u=15893

skinrock · 02-27-2011, 06:51 PM

Quote:

Originally Posted by raf555

been done on you tube>>>?

and i belive he is a forum member, drop him a line...

http://www.e90post.com/forums/member.php?u=15893

According to his other video, he only swapped the needles and gauges, not the cluster. I can double check with him, though.

raf555 · 02-27-2011, 07:34 PM

these may help...

http://www.e90post.com/forums/showth...ght=m3+cluster

http://www.e90post.com/forums/showth...ght=m3+cluster

02-11-2011, 01:45 PM	#1
raf555 Banned 202 Rep 2,100 Posts Drives: BMW 320D Join Date: Sep 2009 Location: South Yorkshire iTrader: (47)	FS - BMW M3 Instrument cluster gauge VERY RARE!!! BIMMERPOST / Classifieds Asking Price: None Item Interest I am selling an euro spec M3 instrument cluster taken from a 2009 M3 (date of manufacture is 03.07.09) This one also has dashed holes on top of the revs cluster ring (where i believe the lights glow up as you move up the revs!) Theses are very rare and one of the coolest mods you can do. This is an original M3 cluster. You need to have it coded for your car, obviously, but this is not difficult to do - there are several people on this forum who will do it for varying amounts of money. Once coded, it's a PLUG AND PLAY install, i.e. you swap the cluster and you're done. Or you can strip it and just take out the needles and all that stuff and keep your OEM cluster. People have done that too. The Part No. is 62107842380. Tischer sells it for $925 new. It is in very good condition overall but does have a few light marks on the screen, which in my opinion are not that noticeable. I am looking at $460 USD shipped (plus paypal fees or send as gift to avoid them!)
	Appreciate 0 Tweet Quote

02-11-2011, 07:23 PM	#2
1QuikWS6 No 55mph 1627 Rep 8,495 Posts Drives: F32 435ix MSport Join Date: Jul 2009 Location: Blitzburgh, PA iTrader: (113) Garage List 2022 BMW M440ix Vert [0.00] 2015 BMW 435ix MSport [0.00] 2000 Pontiac Trans Am [0.00]	Just outta curiosity, I always wondered home these retrofit properly in a newer, non M3 BMW with regards to the oil temp gage. My gage has 250 degress at center, which is where it runs close to during summer months. This cluster only goes to 150 deg max... __________________ F32 435ix//MGM//M Sport-Prem-Tech-Driver Assist-Lighting-Cold Weather-Dyn Handling Pkgs//M4 Black Lthr Int w/M4 Alum Blade Trim//HK w/Bavsound Stg3//763M//M4 Euro LCI Tails//M4 Mirrors w/CF Covers//AWCarbon CF F/R Spoilers-Side Splitters-Diffuser 6WB/ID6 HU+HUD/IND M4 Alcantara Armrest//PURE S2 Turbo//AA FMIC+DP//ER CP+TIC//3.5bar TMAP/TS DV//AWE Tuning Exh w/Blk Tips//Turner MS CF Intake//BM3 Cary Jordan Tune//MPerf Diff//PrecRW Ignition Kit
	Appreciate 0 Quote

02-12-2011, 08:38 PM	#4
STONEY_M5 MAAD HEAD 64 Rep 1,122 Posts Drives: 2010 X5M 2013 M5 Join Date: Jan 2010 Location: NYC iTrader: (4) Garage List 13 F10 M5 [0.00] 2010 X5M [0.00] 07 335i [9.26]	would all of the features work, including the shift lights, digital speedo and so forth??? __________________ F10 M5 e70 X5M Sold E90 335i
	Appreciate 0 Quote

02-15-2011, 02:06 PM	#6
raf555 Banned 202 Rep 2,100 Posts Drives: BMW 320D Join Date: Sep 2009 Location: South Yorkshire iTrader: (47)	here is an example from you tube of the effect of lights glowing up through the dashed holes on top of the revs cluster....
	Appreciate 0 Quote

02-15-2011, 02:43 PM	#9
Dackelone European Editor 10822 Rep 22,992 Posts Drives: N54 e82 Join Date: Feb 2010 Location: Bayern, Germany iTrader: (1)	Op - I believe the part you have is for a DCT M3. 6MT car use a different cluster from what I can see on RealOEM.com http://www.realoem.com/bmw/showparts...2&fg=05&hl=159 It also looks like BMW makes several clusters. DCT, 6MT, KPH, MPH & KPH, ect... I met a guy who does coding over here in DE. He told me he can do this to any BMW. The a hardest part is getting a cluster. Then you just need someone to code the cluster which he said he charges about 140 euros - IF I remember right. Here is his 135i with a M3 cluster in it. Everything works except the rpm lights in the tach ring. But the rpm yellow/red band does move up and down - for warmup. Just the redline lights don't work. I had my 135i cluster coded for the M3 digital speedo & also for it to reflect TRUE vehicle speed instead of the OE "buffered" value (+3 -5% higher). Dackel
	Appreciate 0 Quote

02-16-2011, 01:21 PM	#10
raf555 Banned 202 Rep 2,100 Posts Drives: BMW 320D Join Date: Sep 2009 Location: South Yorkshire iTrader: (47)	thanks for the info dackel. well the hardest part is not a problem as im selling the actual cluster!
	Appreciate 0 Quote

02-18-2011, 06:36 PM	#12
raf555 Banned 202 Rep 2,100 Posts Drives: BMW 320D Join Date: Sep 2009 Location: South Yorkshire iTrader: (47)	bump
	Appreciate 0 Quote

02-18-2011, 06:39 PM	#13
Dackelone European Editor 10822 Rep 22,992 Posts Drives: N54 e82 Join Date: Feb 2010 Location: Bayern, Germany iTrader: (1)	Btw... does anyone know what that "green car" icon is for in my first M3 tach cluster pic? PDC maybe?
	Appreciate 0 Quote

02-19-2011, 11:40 AM	#14
Bavarian Tech Major 271 Rep 1,206 Posts Drives: 335i Join Date: Jan 2007 Location: Pittsburgh/Harrisburg iTrader: (15) Garage List 2006 330i [10.00]	Active Cruise I'm pretty sure
	Appreciate 0 Quote

02-26-2011, 12:34 PM	#15
raf555 Banned 202 Rep 2,100 Posts Drives: BMW 320D Join Date: Sep 2009 Location: South Yorkshire iTrader: (47)	bump
	Appreciate 0 Quote

02-27-2011, 04:04 AM	#16
skinrock Agent Smith 276 Rep 3,344 Posts Drives: 2016 i8 Join Date: Jan 2011 Location: The Matrix iTrader: (9) Garage List 2016 BMW i8 [10.00]	Would this fit/work in a 2007 335i auto? __________________ The i8 needs a V8 amirite?
	Appreciate 0 Quote

02-27-2011, 06:47 PM	#20
raf555 Banned 202 Rep 2,100 Posts Drives: BMW 320D Join Date: Sep 2009 Location: South Yorkshire iTrader: (47)	been done on you tube>>>? and i belive he is a forum member, drop him a line... http://www.e90post.com/forums/member.php?u=15893
	Appreciate 0 Quote

02-27-2011, 07:34 PM	#22
raf555 Banned 202 Rep 2,100 Posts Drives: BMW 320D Join Date: Sep 2009 Location: South Yorkshire iTrader: (47)	these may help... http://www.e90post.com/forums/showth...ght=m3+cluster http://www.e90post.com/forums/showth...ght=m3+cluster
	Appreciate 0 Quote