Sponsored by The Tire Rack

[dlouie87]

I'm trying to make sure these will fit on stock suspension (for now) and rolled and shaved rear fenders.

19x8.5 and 19x10

Trying to decide if I should pull the trigger on these for my 2007 aw 335i. (matte black of course)

_dan

[dlouie87]

no one... I think they will fit... but just wanted to make sure.

[Mahhvinn]

They will fit your car. I'm running 19x10 +27 Rears with no rubbing. Also, I'm dropped on Bilstein PSS10's.

What tire size do you plan on running with the wheels?

[dlouie87]

Originally Posted by M_Truong

They will fit your car. I'm running 19x10 +27 Rears with no rubbing. Also, I'm dropped on Bilstein PSS10's.

What tire size do you plan on running with the wheels?

Thank you!! I thought now one was going to answer.

275/30/19? it's coming with the wheels.... so I have no choice unless I find another set.

also about TPMS. Do most of you buy new tpms when you get a new set of wheels?

and when you buy a new set do you need the adapters like these: http://www.e90post.com/forums/showthread.php?t=75817

or do they come with them?

-Daniel

[xplicitstylez]

hey man whats up? i have the same wheels you have and the same size and specs. when i had a 275 tire on it, i rubbed so much that i cut through the tire, but my car is lowered. i had to stretch tires and i put a 345/35/19 on the 19x10.5 and a 2225/35/19 on the 19x9

[tofu-]

Originally Posted by dlouie87

Thank you!! I thought now one was going to answer.

275/30/19? it's coming with the wheels.... so I have no choice unless I find another set.

they're not going to fit with those tires

10.5 +25 is going to need more stretch. that's m3 fitment

[dlouie87]

Originally Posted by tofu-

they're not going to fit with those tires

10.5 +25 is going to need more stretch. that's m3 fitment

it is m3 fitment..... I hope some people that run extreme offsets chime in.. like the people running 19x11? or people running 19x10 10+.... where are the LTBMW dudes?

Originally Posted by xplicitstylez

hey man whats up? i have the same wheels you have and the same size and specs. when i had a 275 tire on it, i rubbed so much that i cut through the tire, but my car is lowered. i had to stretch tires and i put a 345/35/19 on the 19x10.5 and a 2225/35/19 on the 19x9

did you need tpms adapters?? so you ran a 245/35?

what happens if you run the wheels without tpms?

[e90fun]

if u run the wheels without tpms, you will have a yellow warning sign on at all times.
its not a big deal if you dont get bothered by little things.
To fit your going to need a skinner tire for sure.

[dlouie87]

Originally Posted by e90fun

if u run the wheels without tpms, you will have a yellow warning sign on at all times.
its not a big deal if you dont get bothered by little things.
To fit your going to need a skinner tire for sure.

do a lot of people on here run their wheels without tpms? I know if I drop that kind of money on volks... I won't be able to afford tpms. i'm *cheap.

[mikracer]

Why dont you put the sensors from your current wheels onto the new wheels? Also, there are some people that run 10.5 wide wheel, but the offset is matched to the specific car. You'll probably have to run quite a bit of camber to get that wheel to fit and not rub.

[dlouie87]

Originally Posted by mikracer

Why dont you put the sensors from your current wheels onto the new wheels? Also, there are some people that run 10.5 wide wheel, but the offset is matched to the specific car. You'll probably have to run quite a bit of camber to get that wheel to fit and not rub.

there are tires on the wheels already. I dont want to pay 60 for unmount and balance and have the "40%" thread run out and have to pay again... rather drive till the thread goes out... then buy tpms then when I have to replace it.

so what is the "offset" that other people run without rubbing... I think either or.... a 10.5 is gonna need fender work and camber.

[FLOSS]

18x11 +25 with 265/35 and -2.7 camber... no rubbing

[dlouie87]

nice ccw

how do you adjust the rear camber on these cars?

[Morpheus]

Originally Posted by dlouie87

nice ccw

how do you adjust the rear camber on these cars?

I run a 19x9.5 et 25 no roll no rubbing. 265 tire, but I have room for more.

[dlouie87]

morpheus, are those RS-Ds?

[FLOSS]

Originally Posted by dlouie87

nice ccw

how do you adjust the rear camber on these cars?

it's adjusted on the lower control arms

[dlouie87]

Originally Posted by FLOSS

it's adjusted on the lower control arms

thank you... I'll post pics of the wheels when I get them... thanks for all the help.

[venable_steven]

Originally Posted by FLOSS

18x11 25 with 265/35 and -2.7 camber... no rubbing

Beautiful car

[FrankiE90]

rear 19x10.5 et25 (shaved to be et30) w/ 275/30 nitto invo
my rear tire side walls were smooth after rubb'n for a few weeks.



et25 may need to go 265/30 toyo t1r, or falken 452
ur gonna need clearance.

if u luv the wheels, u can diff'ly make them work.
and you can add 10mm spacers for front.

[Morpheus]

Originally Posted by dlouie87

morpheus, are those RS-Ds?

RZ-DF's

[haterade]

Originally Posted by FLOSS

18x11 25 with 265/35 and -2.7 camber... no rubbing

damn that looks killer. what u running up front?

[FLOSS]

^^ 18x9 +19 with a 225/40