Sponsored by The Tire Rack

[JawjaDawg]

I was thinking about purchasing some wheels off ebay, I have a 07 328i, Im sure the front will fit ok but not sure how flush the rear would sit. Please let me know how the rears would fit with 265/30/19s thanks!

[whip_lash]

Should fit no problem. Im running the same tire on a 9 inch rim in the back withe ET of 39.

[1QuikWS6]

Why don't you just plug all your pertinent info for the rears into the calculator right above your post?

It will tell you how far the new wheels will stick in toward the shock & how far out from your originals - among other things...

So you know how your wheels look now, the results will give you an actual concrete number as to how far they will stick inward & outward from current.


For eg. this is what I get when I input my old rears vs. my new rears:

Based on your stock wheel setup, your new wheel will have: 20mm LESS clearance on the strut side, and the outside edge of the wheel will EXTEND an extra 18mm

Original Tires Diameter (in.) 24.97
New Tires Diameter (in.) 25.03
Difference in diameter (in.) 0.055
Percent Difference 0.22