[thetryal]

i have my cmgs on all default (except dimmer). It is set to 6.5 min and 12 max? i have v1.07

i wanted to see what settings you all have, ie combined spray, min/max,etc?

any great results with certain settings?

[Iwantm3]

Nooooo do 8 and 13 that'll be perfect below 8 it's too early with cm10 I even do 8.5

[Iwantm3]

and you need downpipes ASAP !!!!! that's what you should have bought before meth

[thetryal]

dps are next on the list, just hesitant b/c of warranty. i dont want to have to remove them before dealer visits. so far no bog at 6-7 min/12max .

do you have your cmgs on default settings?

[Iwantm3]

Originally Posted by thetryal

dps are next on the list, just hesitant b/c of warranty. i dont want to have to remove them before dealer visits. so far no bog at 6-7 min/12max .

do you have your cmgs on default settings?

no bug but it'll feel stronger with 8 - 12.5 or 8.5-13 I've played around a lot with it ! Dp's are killing you right now

[supahdave]

I run mine:

Min 9psi, 25% DC
Max 13psi, 100%

CM10 nozzle.

[thetryal]

unfortuneatly, i really never see ~9+psi on the daily drive i have. too much traffic and lights. if i rarely see that psi, meth would rarely kick in.

[Iwantm3]

Originally Posted by thetryal

unfortuneatly, i really never see ~9+psi on the daily drive i have. too much traffic and lights. if i rarely see that psi, meth would rarely kick in.

So why the hell do yo need meth below 9 psi ? you want meth only after 15 psi anyway, but it seems like you have your own stubborn opinion on this anyway why ask others then ? lol

[Forcefed3]

What mixture of meth/water are you running? That is one of the factors when deciding when to start spraying

[thetryal]

im running 49 meth/51 water, devils own juice.

i ask to learn. most of the learning i have done is based on reading forums, etc.
there is alot of trial and error. thankfully more trial.

doesnt meth have additional cleaning and octane properties at most any psi??

thanks for the helpful advice.

[Forcefed3]

Originally Posted by thetryal

im running 49 meth/51 water, devils own juice.

i ask to learn. most of the learning i have done is based on reading forums, etc.
there is alot of trial and error. thankfully more trial.

doesnt meth have additional cleaning and octane properties at most any psi??

thanks for the helpful advice.

Yes, it the octane of meth will not change with a different PSI. You are running a lot of water with a CM10, so you dont want to spray too early. Spraying too early with a large nozzle and a lot of water could cause you to hydro lock.

[Iwantm3]

Boost juice is pointless , get at least 70 30 mix

[Forcefed3]

Originally Posted by Iwantm3

Boost juice is pointless , get at least 70 30 mix

Running less than 70/30 is fine, there just wont be as much power.