|
|
|
|
PLEASE HELP SUPPORT E90POST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
VMR VB3 10" or V718? e90 sedan
|
|
Wheels and Tires forum Sponsored by The Tire Rack
Please help to directly support e90post by doing your tirerack shopping from the above link. For every sale made through the link, e90post gets sponsor support to keep the site alive. Disclaimer |
|
Thread Tools | Search this Thread |
04-11-2011, 01:51 PM | #1 |
New Member
0
Rep 21
Posts |
VMR VB3 10" or V718? e90 sedan
Hi Guys,
i've done quite a bit of research into buying wheels, and am about to pull the trigger on a set of VMR's. Just looking for some quick opinions. What would you rather see on a Sparkling Graphite e90 sedan for the rear: VMR VB3 19x10 VMR V718 19x9.5 So the question basically comes down to, 19x10 for the concavity, or 19x9.5 for a refreshed look on the v718's. I like the v718's cause the design makes the spokes look longer, hence wheels look bigger. But damn, 19x10 on vb3's have wicked concavity. btw, going to run 245/35/19 on front, and 275/30/19 on back with minimal drop (1.5" on eibach prokit). pre-lci. vb3 on left, v718 on right |
04-11-2011, 02:38 PM | #2 |
Lieutenant General
379
Rep 16,968
Posts |
The 19x10 concave rear is pretty hard to beat IMO. It ultimately comes down to personal preference but the CSLs are a classic look and a super concave rear works really well on these cars.
|
Appreciate
0
|
Bookmarks |
|
|