![]() |
![]() |
![]() |
![]() |
![]() ![]() |
![]() |
BMW Garage | BMW Meets | Register | Today's Posts | Search |
![]() |
![]() ![]() |
BMW 3-Series (E90 E92) Forum
>
OEM Aero Lip e92 dimensions
![]() |
![]() |
04-12-2011, 01:52 PM | #1 |
Private First Class
![]() 30
Rep 144
Posts |
OEM Aero Lip e92 dimensions
Does anyone have any measurements of how much lower/further the OEM Aero Lip extends from the original factory bumper? 1inch?
Reason I ask is that I have kw v2 coilovers installed (car is lowered), and am afraid of scraping the hell out of it if I ever need a tow. (Flat tire a few weeks ago required a flatbed tow, and the stock bumper BARELY made it up the ramp.) thanks in advance! |
04-12-2011, 02:38 PM | #2 |
Colonel
![]() ![]() 77
Rep 2,491
Posts
Drives: 991 C2S Guards Red
Join Date: Aug 2009
Location: Nashville, TN
|
You will scrape it... I could try to measure later, but I'm lowered on PSS9s and scrape it daily. Just buy a rep and you won't feel as bad
![]() However, sometimes the flatbeds can have boards to increase the angle your car approaches. With any lowered car you are going to have problems with this type of issue, but the aero lip definitely will make it worse. I would say it extends the front bumper at least 1-2" forward and 2" lower, rounding up. (don't hold me to that...)
__________________
991.1 C2S PDK, Guards Red | PDCC | Sport Chrono + | Clear Tail Lights | Alcantara Steering Wheel | HRE FF01 | TechArt Springs | Sport Exhaust
Previous: Porsche 997 Turbo 6MT, Atlas Gray | Cobb Stage 2 | HRE FF01 | Europipe Stg. 2 Exhaust | GMG LMS Rollbar | GT2 Exhaust Tips | Pagid RS-29 | Rennline Pedals | SSK 997.2 Track Car, heavily modded & E92 M3 DCT, still miss her daily & E92 335i heavily modded |
Appreciate
0
|
![]() |
Bookmarks |
|
|