|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
06 320i with Depo LED tail lights
|
|
04-18-2011, 11:56 AM | #1 |
Enlisted Member
5
Rep 33
Posts |
06 320i with Depo LED tail lights
Hi, I have problem with my 2006 E90 and the Depo LED tail lights,
I have installed all parts (include 2 resisters for each side) correctly and no service light is on and all lights function well EXCEPT only the bottom outer LED block is "on", while the bottom inner LED block is "off". (Both side are the same). I did some experience for different connections, and I confirm both LED blocks can be "on" while exchange the connection....so...both LED blocks are okay to function. And unplug the outer resister wire, then both LED blocks (outer & inner) can be "on" but with annoying service light comes out. So...other than skip's method as described here (http://www.e90post.com/forums/showth...=depo+led+tail) as quoted to do something re-wiring (I am not expert in doing this...), is there any method to have both LED blocks "on" without service light comes out? Thanks! |
04-18-2011, 03:34 PM | #2 |
First Lieutenant
14
Rep 328
Posts |
I would ditch the resistors and try to get it coded out.
|
Appreciate
0
|
Bookmarks |
|
|