[AMT92]

I'm looking to put 20mm spacers on the rear of my 330i w/ 162's sitting on stock sport suspension. I know that 20mm will fit just perfect so I'm not worried about that. Just a couple of questions.

1. Will these work together? And do the bolts have to be black?
SPACERS
http://www.ecstuning.com/News/Black_...2130081/ES319/
BOLTS
http://www.ecstuning.com/News/Black_...081/ES2130081/
2. Is there anything I need to tell my tire shop when getting these installed? Such as a certain torque to install them at or anything?

Thanks

[AMT92]

bump

[AMT92]

bump

[will1968]

I use the H&R DRA 20mm spacer part number 40757252 these bolt to your hub and then your wheel bolts to the spacer with your standard wheel bolts.
www.trakplus.com
[IMG][/IMG]
[IMG][/IMG]
[IMG][/IMG]

[AMT92]

http://www.ecstuning.com/Audi-TT--/S...529/ES1303529/
thats the same part number as given above, and the same part number the H&R site gives me for my car. even though it's listed for an Audi TT, would the above work?

[AMT92]

bump

[will1968]

The part number you have above is 4075725 which are for the spacer in the pic on that site which is the DR-System which require longer wheel-bolts.

The part number I'm using is 40757252 DRA System spacer which should be fitted to the axial hub using the bolts provided and then you fit your wheel with your existing wheel bolts as in the pic's.

http://www1.carparts-cat.com/webkat....7107004&ROOT=1

[AMT92]

Originally Posted by will1968

The part number you have above is 4075725 which are for the spacer in the pic on that site which is the DR-System which require longer wheel-bolts.

The part number I'm using is 40757252 DRA System spacer which should be fitted to the axial hub using the bolts provided and then you fit your wheel with your existing wheel bolts as in the pic's.

http://www1.carparts-cat.com/webkat....7107004&ROOT=1

i'm talking about these http://www.ecstuning.com/ES1303529/

[will1968]

Thats the ones you need.

[AMT92]

do these need to be torqued down? or can I just put them on myself

[will1968]

Originally Posted by Joker330i

do these need to be torqued down? or can I just put them on myself

Yes you can fit them yourself they come with all the fitting details, just make sure you clean your hub up and use a bit of copper grease. They do need to be torqued down but just to the same as your wheel.