Dyno Day / Vishnu Tuning!

vAnt826 · 03-21-2007, 06:06 AM

http://www.e90post.com/forums/showthread.php?t=50932

DrewKo · 03-21-2007, 10:16 AM

Just a quick off topic note....We recently attended a similar meet in Georgia and it was f'in fantastic! You are going to love Vishnu's Procede. P.S., our dyno was $150 per person.

http://www.e90post.com/forums/showth...t=45533&page=4

http://www.e90post.com/forums/showthread.php?t=51943

normtrum · 03-21-2007, 12:22 PM

Jonm42 has been working on this. He's out of town for few days, but I know he sent a pm to shiv trying to get some of the specifics ironed out. We should hear shortly.

ATG · 03-21-2007, 06:31 PM

Can PROcede be ordered from Shiv on an expedited basis so that he could install it during that dyno day?

normtrum · 03-21-2007, 06:35 PM

Quote:

Originally Posted by ATG

Can PROcede be ordered from Shiv on an expedited basis so that he could install it during that dyno day?

Funny you should ask that - I pm'd shiv with that exact same question. Have you ordered yet? I ordered March 2. I guess it all depends on the install date. I'll let you know as soon as I hear back from shiv.

ATG · 03-21-2007, 06:58 PM

Thanks. I haven't ordered yet because I wanted to see more reports from the users, but since the man himself is going to be doing the local installs, I'm ready to order assuming that I can get the Procede on or before the dyno day.

DrewKo · 03-21-2007, 11:34 PM

He brought the units to the event, so I would assume if you signed up and Vishnu confirmed your order, that yours would arrive. I called Vishnu to assure mine would be at the dyno event. Chris is who I spoke to.

P.S., here is a review I wrote with videos of the post-Procede experience!

http://www.e90post.com/forums/showthread.php?t=51943

normtrum · 03-22-2007, 01:47 AM

Quote:

Originally Posted by DrewKo

He brought the units to the event, so I would assume if you signed up and Vishnu confirmed your order, that yours would arrive. I called Vishnu to assure mine would be at the dyno event. Chris is who I spoke to.

P.S., here is a review I wrote with videos of the post-Procede experience!

http://www.e90post.com/forums/showthread.php?t=51943

That's good to know, thanks. I wasn't sure if he was doing this or not. I'll call to verify, but I guess it makes sense.

jonm42 · 03-26-2007, 05:50 PM

Back in town. I found a dyno shop that will run us $65 ea. for 2-3 pulls (ea.). Shiv said 8-10 committed folks (we have 5+ over in the other thread: http://www.e90post.com/forums/showthread.php?t=50932) and $500 for his trip up here (airfare + hotel). So if we have 10 folks, thats $115 ea. total; even with 8, its $127.50 (procede not included

). After placing the order with Vishnu, please use the other thread to sign up and send me a PM with real world name and number for coordination purposes.

jonm42 · 04-01-2007, 04:06 PM

Quick update -- we rented the shop for the day for $750. See the other thread for details.

Quote:

Originally Posted by jonm42

Back in town. I found a dyno shop that will run us $65 ea. for 2-3 pulls (ea.). Shiv said 8-10 committed folks (we have 5+ over in the other thread: http://www.e90post.com/forums/showthread.php?t=50932) and $500 for his trip up here (airfare + hotel). So if we have 10 folks, thats $115 ea. total; even with 8, its $127.50 (procede not included

). After placing the order with Vishnu, please use the other thread to sign up and send me a PM with real world name and number for coordination purposes.

jonm42 · 04-16-2007, 03:01 PM

We've had one slot open up for the 5/5 Vishnu install/dyno day -- go take a peek: http://www.e90post.com/forums/showthread.php?t=50932

jonm42 · 04-20-2007, 12:41 PM

One of the folks was in an accident

(he and wife are ok

) and had to drop out so we have a couple of slots open on 5/5. Click through for details.

Quote:

Originally Posted by jonm42

We've had one slot open up for the 5/5 Vishnu install/dyno day -- go take a peek: http://www.e90post.com/forums/showthread.php?t=50932

murph-54 · 04-24-2007, 04:14 PM

Do you know what time we are going to start and how long each car takes? I am flying out of PDX on the 5th at 11:45AM and want to make sure I can get to the airport by 10:45 AM. Thanks.

normtrum · 04-24-2007, 04:30 PM

Quote:

Originally Posted by murph-54

Do you know what time we are going to start and how long each car takes? I am flying out of PDX on the 5th at 11:45AM and want to make sure I can get to the airport by 10:45 AM. Thanks.

It starts at 9:00. Sorry, I don't know how long per car. Personally I wouldn't have any problem with you going 1st of 2nd. I'm sure we can all work it out.

jonm42 · 04-24-2007, 08:01 PM

We have a possible taker for either the first AM or first PM slot, but I am waiting to hear back from them. I have no problem with you being either the first or second AM slot. Since Shiv said the max in one day was 9, I would imagine an hour per car. You may want to be there slightly early so we can get going straightaway.

I would like to move this discussion to the other thread so we can all just look in one spot. If you like, we can start a schedule, but I wanted to get a finished list of committed folk before we did that.

03-21-2007, 06:06 AM	#1
vAnt826 Major 70 Rep 1,417 Posts Drives: E92 M3 Join Date: Nov 2006 Location: Seattle iTrader: (3)	Dyno Day / Vishnu Tuning! http://www.e90post.com/forums/showthread.php?t=50932
	Appreciate 0 Tweet Quote

03-21-2007, 10:16 AM	#2
DrewKo Lieutenant Colonel 46 Rep 1,568 Posts Drives: 335i Montego Blue Saddle Brown Join Date: Jan 2007 Location: Atlanta, GA iTrader: (4) Garage List 2007 335i [0.00]	Just a quick off topic note....We recently attended a similar meet in Georgia and it was f'in fantastic! You are going to love Vishnu's Procede. P.S., our dyno was $150 per person. http://www.e90post.com/forums/showth...t=45533&page=4 http://www.e90post.com/forums/showthread.php?t=51943
	Appreciate 0 Quote

03-21-2007, 12:22 PM	#3
normtrum Colonel 52 Rep 2,225 Posts Drives: e90 335i, e46 330i Join Date: Feb 2007 Location: PNW iTrader: (1)	Jonm42 has been working on this. He's out of town for few days, but I know he sent a pm to shiv trying to get some of the specifics ironed out. We should hear shortly.
	Appreciate 0 Quote

03-21-2007, 06:31 PM	#4
ATG Major 77 Rep 1,058 Posts Drives: f30 328 xdrive, e90 335i gone Join Date: Feb 2007 Location: Eastside iTrader: (0) Garage List 2013 BMW 328i xdrive [0.00] 2007 e90 335i [0.00]	Can PROcede be ordered from Shiv on an expedited basis so that he could install it during that dyno day?
	Appreciate 0 Quote

03-21-2007, 06:58 PM	#6
ATG Major 77 Rep 1,058 Posts Drives: f30 328 xdrive, e90 335i gone Join Date: Feb 2007 Location: Eastside iTrader: (0) Garage List 2013 BMW 328i xdrive [0.00] 2007 e90 335i [0.00]	Thanks. I haven't ordered yet because I wanted to see more reports from the users, but since the man himself is going to be doing the local installs, I'm ready to order assuming that I can get the Procede on or before the dyno day.
	Appreciate 0 Quote

03-21-2007, 11:34 PM	#7
DrewKo Lieutenant Colonel 46 Rep 1,568 Posts Drives: 335i Montego Blue Saddle Brown Join Date: Jan 2007 Location: Atlanta, GA iTrader: (4) Garage List 2007 335i [0.00]	He brought the units to the event, so I would assume if you signed up and Vishnu confirmed your order, that yours would arrive. I called Vishnu to assure mine would be at the dyno event. Chris is who I spoke to. P.S., here is a review I wrote with videos of the post-Procede experience! http://www.e90post.com/forums/showthread.php?t=51943
	Appreciate 0 Quote

03-26-2007, 05:50 PM	#9
jonm42 Captain 27 Rep 617 Posts Drives: too fast for conditions. Join Date: Feb 2007 Location: Portland, OR iTrader: (2)	Back in town. I found a dyno shop that will run us $65 ea. for 2-3 pulls (ea.). Shiv said 8-10 committed folks (we have 5+ over in the other thread: http://www.e90post.com/forums/showthread.php?t=50932) and $500 for his trip up here (airfare + hotel). So if we have 10 folks, thats $115 ea. total; even with 8, its $127.50 (procede not included ). After placing the order with Vishnu, please use the other thread to sign up and send me a PM with real world name and number for coordination purposes.
	Appreciate 0 Quote

04-16-2007, 03:01 PM	#11
jonm42 Captain 27 Rep 617 Posts Drives: too fast for conditions. Join Date: Feb 2007 Location: Portland, OR iTrader: (2)	One slot open! We've had one slot open up for the 5/5 Vishnu install/dyno day -- go take a peek: http://www.e90post.com/forums/showthread.php?t=50932
	Appreciate 0 Quote

04-24-2007, 04:14 PM	#13
murph-54 Private 9 Rep 83 Posts Drives: 2007 335i TS Coupe 6MT Join Date: Apr 2007 Location: Portland, Oregon iTrader: (0)	Do you know what time we are going to start and how long each car takes? I am flying out of PDX on the 5th at 11:45AM and want to make sure I can get to the airport by 10:45 AM. Thanks.
	Appreciate 0 Quote

04-24-2007, 08:01 PM	#15
jonm42 Captain 27 Rep 617 Posts Drives: too fast for conditions. Join Date: Feb 2007 Location: Portland, OR iTrader: (2)	We have a possible taker for either the first AM or first PM slot, but I am waiting to hear back from them. I have no problem with you being either the first or second AM slot. Since Shiv said the max in one day was 9, I would imagine an hour per car. You may want to be there slightly early so we can get going straightaway. I would like to move this discussion to the other thread so we can all just look in one spot. If you like, we can start a schedule, but I wanted to get a finished list of committed folk before we did that.
	Appreciate 0 Quote