Tubing to buy for Spearco Intercooler?

mase · 05-04-2011, 02:50 PM

I have a Spearco Intercooler that I plan to install soon that uses OEM tubing, and I'm wondering if any of the tubing can be replaced with cheap silicone tubing to improve efficiency. I don't plan to be changing out the charge pipe. Thanks!

subieworx · 05-04-2011, 08:10 PM

It didn't come with new tubes? Mine came with a pipe for the driver's side and a few silicon couplers.

Proper Motion LLC · 05-05-2011, 03:12 AM

Evolution Racewerks has and sells upper IC piping that fits perfectly in between Both the Spearco FMIC and the ER Chargepipe.

M3 Eater · 05-05-2011, 11:44 PM

I used it for xo2 Spearco Knock Off.

You need a 45degree elbow for hot side, & a hump coupler 4 inch wouldn't be a bad idea for lower on the cold side, and stock elbow, HP autowerks elbow, or vibrant makes oversize colored elbows for up top.

I had ER charge pipe and xo2 at the same time. Hump coupler at the bottom will allow the cold side piping to flex a bit to help reduce coupler kink.

05-04-2011, 02:50 PM	#1
mase Banned 62 Rep 446 Posts Drives: 335i Join Date: Nov 2009 Location: NYC iTrader: (27)	Tubing to buy for Spearco Intercooler? I have a Spearco Intercooler that I plan to install soon that uses OEM tubing, and I'm wondering if any of the tubing can be replaced with cheap silicone tubing to improve efficiency. I don't plan to be changing out the charge pipe. Thanks!
	Appreciate 0 Tweet Quote

05-04-2011, 08:10 PM	#2
subieworx Lieutenant 36 Rep 468 Posts Drives: 07 335 Join Date: Jun 2010 Location: Ohio iTrader: (1)	It didn't come with new tubes? Mine came with a pipe for the driver's side and a few silicon couplers.
	Appreciate 0 Quote

05-05-2011, 03:12 AM	#3
Proper Motion LLC Custom Powder Coater 150 Rep 2,784 Posts Drives: White 335i Sedan Join Date: Dec 2008 Location: Orange County CA iTrader: (2)	Evolution Racewerks has and sells upper IC piping that fits perfectly in between Both the Spearco FMIC and the ER Chargepipe. __________________ www.propermotion714.com
	Appreciate 0 Quote

05-05-2011, 11:44 PM	#4
M3 Eater Major 37 Rep 1,054 Posts Drives: 335i Sedan Join Date: May 2010 Location: Unknown iTrader: (3) Garage List 2007 335i [0.00]	+1 I used it for xo2 Spearco Knock Off. You need a 45degree elbow for hot side, & a hump coupler 4 inch wouldn't be a bad idea for lower on the cold side, and stock elbow, HP autowerks elbow, or vibrant makes oversize colored elbows for up top. I had ER charge pipe and xo2 at the same time. Hump coupler at the bottom will allow the cold side piping to flex a bit to help reduce coupler kink. __________________ JB4 beta 15 ohms FSB,AEM inline filter/ CM 10, ETS fmic, ER custom made charge pipe,TSW Donnington 18's,Simitumo HTRZ3, Injen DCI, AR DPs, Forge DVs, AA SLD, Koni FSD, ZSP springs.
	Appreciate 0 Quote