Does anyone know what exhaust is that 335i coupe mod in the video??

a10033208 · 05-12-2011, 02:42 PM

Does anyone know what exhaust is that 335i coupe mod in the video??

i wanna know what brand of this bmw 335i coupe to mod
it is a nice sound.

or anyone have any suggestion what exhaust i can mod and the sound like this bmw 335i coupe??

thx so much

BcuzAWD · 05-12-2011, 03:13 PM

Sounds like stock exhaust to be honest

jeveryday · 05-12-2011, 03:47 PM

stock

a10033208 · 05-12-2011, 04:52 PM

Quote:

Originally Posted by kyrios

Sounds like stock exhaust to be honest

it is not stock
it has aftermarket exhaust but i dont know what is that brand

c_jeong89 · 05-12-2011, 05:08 PM

an exhaust from a certain brand for a 335i will not sound the same for the 328i. If I were you I would just search up 325/28i exhaust vids on youtube to get a better sound judgement.

Penn999 · 05-12-2011, 05:25 PM

remus?

Leo985i · 05-12-2011, 06:09 PM

Quote:

Originally Posted by Penn999

remus?

Remus only makes quad exhausts for the 335i. That thing sounds stockish........

Forcefed3 · 05-12-2011, 06:14 PM

Its probably borla.

Syndicategt · 05-12-2011, 06:19 PM

Stock with golf tee mod + downpipes if you ask me....sounds nice.

N54bimmer · 05-12-2011, 06:27 PM

Ive seen the original version of that video, its stock exhaust with golf tee mod..thats it!!

dmurray14 · 05-12-2011, 07:18 PM

i dont know, but theres no excuse for him not sliding through that turn in the vid

a10033208 · 05-12-2011, 09:14 PM

Quote:

Originally Posted by N54bimmer

Ive seen the original version of that video, its stock exhaust with golf tee mod..thats it!!

what is golf tee mod??
where i can get it or any where to describe the golf tee mod??

thx

jdbretz · 05-12-2011, 09:50 PM

The easiest way is to open your trunk, and remove the tail light access panel for the drivers side tail light. Behind the panel below the actual taillight, there is a solenoid there with a vacuum line going into it. Remove the electrical connector on it by pushing in on the metal bar and pull the connector off. Then start your car and enjoy the louder exhaust note. All this does is keep the flap in the drivers side tail pipe open all the time.

michaelalex17 · 05-12-2011, 09:53 PM

Quote:

Originally Posted by jdbretz

The easiest way is to open your trunk, and remove the tail light access panel for the drivers side tail light. Behind the panel below the actual taillight, there is a solenoid there with a vacuum line going into it. Remove the electrical connector on it by pushing in on the metal bar and pull the connector off. Then start your car and enjoy the louder exhaust note. All this does is keep the flap in the drivers side tail pipe open all the time.

i believe OP has a 328i so this mod is not going to work

ian2002525 · 05-12-2011, 11:01 PM

sounds like my eisenmann

ouchie · 05-13-2011, 12:14 AM

Quote:

Originally Posted by jdbretz

The easiest way is to open your trunk, and remove the tail light access panel for the drivers side tail light. Behind the panel below the actual taillight, there is a solenoid there with a vacuum line going into it. Remove the electrical connector on it by pushing in on the metal bar and pull the connector off. Then start your car and enjoy the louder exhaust note. All this does is keep the flap in the drivers side tail pipe open all the time.

That's the Golf Tee Mod?

GreekMaverick · 05-13-2011, 08:50 AM

Quote:

Originally Posted by jeveryday

stock

+1

Sounds kinda like mine. (and it looks like mine

)
Stock with the vacuum line unplugged.
Go to 2:24 for the sound.

2Hip · 05-13-2011, 09:09 AM

Doesn't the golf-tee mod only make it louder at stat-up? My understanding is the exhaust flapper opens once the car is warmed up. If that's the case the mod seems pretty useless to me considering the engine warms up really fast because of the electrical water pump.

I could be wrong as I'm a newbie but this is my understanding

jdbretz · 05-13-2011, 10:52 AM

Quote:

Originally Posted by michaelalex17

i believe OP has a 328i so this mod is not going to work

Good catch, I didn't realize he had a 328 and wanted it to sound like a 335.

EDIT: It turns out he does have a 335 after all

Quote:

Originally Posted by ouchie

That's the Golf Tee Mod?

See below

Quote:

Originally Posted by 2Hip

Doesn't the golf-tee mod only make it louder at stat-up? My understanding is the exhaust flapper opens once the car is warmed up. If that's the case the mod seems pretty useless to me considering the engine warms up really fast because of the electrical water pump.

I could be wrong as I'm a newbie but this is my understanding

No, the mod makes it louder at idle and whenever crusing by always keeping the flap open. Normally the flap while crusing and lower RPM would be closed even once the engine is warmed up. Anytime you go WOT or give it a lot of gas that flap will normally open on its own, but it does not stay open during normal driving. This mod will only make the exhaust louder during those light throttle driving times, but will not make it any louder than it was before under hard acceleration.

hateface · 05-13-2011, 01:14 PM

removing the connector doesn't trigger any codes does it?

jdbretz · 05-13-2011, 01:49 PM

Quote:

Originally Posted by hateface

removing the connector doesn't trigger any codes does it?

Yes it does trigger a shadow code, but will not cause any alarms to be displayed in the dash. If that worries you then you can get under the car, remove the vacuum line going into the flap, plug it with an object (i.e. golf tee mod) to prevent dirt from getting in the vacuum line, and call it a day. Either way accomplishes the same end state. I have the ability to clear the codes so it did not bother me that is throws a shadow code.

hateface · 05-13-2011, 06:51 PM

that was gonna be my next question, can't you just clear it with a CAN or other tool?

05-12-2011, 02:42 PM	#1
a10033208 New Member 22 Rep 19 Posts Drives: bmw 335i coupe Join Date: Mar 2011 Location: california iTrader: (0)	Does anyone know what exhaust is that 335i coupe mod in the video?? Does anyone know what exhaust is that 335i coupe mod in the video?? i wanna know what brand of this bmw 335i coupe to mod it is a nice sound. or anyone have any suggestion what exhaust i can mod and the sound like this bmw 335i coupe?? thx so much
	Appreciate 0 Tweet Quote

05-12-2011, 03:13 PM	#2
BcuzAWD Colonel 111 Rep 2,584 Posts Drives: with E85 on 22psi at 475tq Join Date: May 2008 Location: norcal iTrader: (8)	Sounds like stock exhaust to be honest
	Appreciate 0 Quote

05-12-2011, 03:47 PM	#3
jeveryday Colonel 82 Rep 2,335 Posts Drives: 2012 535i xDrive Join Date: Oct 2007 Location: Long Island, New York iTrader: (6)	stock
	Appreciate 0 Quote

05-12-2011, 05:08 PM	#5
c_jeong89 Banned 93 Rep 2,097 Posts Drives: E90 TiAg Join Date: Feb 2009 Location: Irvine/Bay Area iTrader: (16)	an exhaust from a certain brand for a 335i will not sound the same for the 328i. If I were you I would just search up 325/28i exhaust vids on youtube to get a better sound judgement.
	Appreciate 0 Quote

05-12-2011, 05:25 PM	#6
Penn999 Lieutenant Colonel 55 Rep 1,661 Posts Drives: 335i coupe Join Date: May 2010 Location: VA iTrader: (3)	remus? __________________ 07' MT, Quaife LSD, BMW Performance LED Steering Wheel, HPF FMIC, AA BOV, HPF Exhaust, DCI, Procede V5, AR Stage 1 oil cooler, AR OCC, AR CL DP's, Vishnu Meth Kit, UUC SSK+DSSR, UUC Shift knob, (19 inch)VMR V715's/Yokohama Advan AD08's, Hartge Pedals and Floor Mats. Awaiting Install: M3 Rear Subframe Bushings, Full M3 suspension bits, AST 4100's, DSS axles. Future plans: Vishnu Single turbo kit
	Appreciate 0 Quote

05-12-2011, 06:14 PM	#8
Forcefed3 Banned 136 Rep 4,732 Posts Drives: 2008 335i Join Date: May 2010 Location: South iTrader: (2) Garage List 2008 335i [1.00]	Its probably borla.
	Appreciate 0 Quote

05-12-2011, 06:19 PM	#9
Syndicategt Brigadier General 164 Rep 3,730 Posts Drives: 335i Join Date: Sep 2009 Location: Nor Cal iTrader: (11)	Stock with golf tee mod + downpipes if you ask me....sounds nice. __________________ 2008 BMW 335i e90 - Sold - Rob Beck Turbos / PROcede V5 / Aquamist HFS-4 / AR Downpipes / AE Exhaust / ER Comp FMIC / ER CP / TiAL BOV / Custom Intake / RPI Scoops / Quaife LSD / Swift-Koni Coilovers / DSS HS / Morr VS8.2 Sig Black / Michelin PSS / P3 Boost Guage / M3 body / M3 steering wheel / Adam's Rotors / Hawk HPS / SS lines /
	Appreciate 0 Quote

05-12-2011, 06:27 PM	#10
N54bimmer Private 5 Rep 98 Posts Drives: E92 n54 Join Date: Apr 2011 Location: North America iTrader: (0)	Ive seen the original version of that video, its stock exhaust with golf tee mod..thats it!!
	Appreciate 0 Quote

05-12-2011, 07:18 PM	#11
dmurray14 The Stig 33 Rep 1,232 Posts Drives: Quickly Join Date: Apr 2005 Location: US iTrader: (1)	i dont know, but theres no excuse for him not sliding through that turn in the vid __________________
	Appreciate 0 Quote

05-12-2011, 09:50 PM	#13
jdbretz Captain 56 Rep 923 Posts Drives: '18 X5d, '12 M3 ZCP, '12 F30 Join Date: Dec 2010 Location: FL Panhandle iTrader: (10)	The easiest way is to open your trunk, and remove the tail light access panel for the drivers side tail light. Behind the panel below the actual taillight, there is a solenoid there with a vacuum line going into it. Remove the electrical connector on it by pushing in on the metal bar and pull the connector off. Then start your car and enjoy the louder exhaust note. All this does is keep the flap in the drivers side tail pipe open all the time.
	Appreciate 0 Quote

05-12-2011, 11:01 PM	#15
ian2002525 台灣台北市 92 Rep 1,267 Posts Drives: 2009 GT-R Premium Join Date: Jun 2010 Location: Brentwood, TN/台灣 iTrader: (6) Garage List 2011 335i coupe [9.00]	sounds like my eisenmann __________________ Car Sold- 2011 E92 335i Msport Car Sold- 2009 Nissan GT-R tuned on E85
	Appreciate 0 Quote

05-13-2011, 09:09 AM	#18
2Hip Private 1 Rep 57 Posts Drives: '07 335i Sport AW Join Date: Mar 2011 Location: Fredneck, MD iTrader: (1)	Doesn't the golf-tee mod only make it louder at stat-up? My understanding is the exhaust flapper opens once the car is warmed up. If that's the case the mod seems pretty useless to me considering the engine warms up really fast because of the electrical water pump. I could be wrong as I'm a newbie but this is my understanding
	Appreciate 0 Quote

05-13-2011, 01:14 PM	#20
hateface e92 lci bumpers are ugly 5 Rep 127 Posts Drives: e92 LCI Join Date: Mar 2011 Location: ownline iTrader: (3)	removing the connector doesn't trigger any codes does it?
	Appreciate 0 Quote

05-13-2011, 06:51 PM	#22
hateface e92 lci bumpers are ugly 5 Rep 127 Posts Drives: e92 LCI Join Date: Mar 2011 Location: ownline iTrader: (3)	that was gonna be my next question, can't you just clear it with a CAN or other tool?
	Appreciate 0 Quote