Curious on resetting DME adaptation

clairvoyant · 06-10-2011, 10:23 AM

Is there a way to reset the DME adaptation using Procede v5?
I am not talking about the tune reset adaptation but the car ECU itself. Thank You

v300 · 06-10-2011, 11:02 AM

By any chance do you have an AT6?

clairvoyant · 06-10-2011, 11:42 AM

Nope, manual here

Quote:

Originally Posted by v300

By any chance do you have an AT6?

Ilma · 06-10-2011, 01:52 PM

Quote:

Originally Posted by clairvoyant

Is there a way to reset the DME adaptation using Procede v5?
I am not talking about the tune reset adaptation but the car ECU itself. Thank You

Yes....you can reset the car's ECU using the Procede.

IIRC it's one of the resets available when you put the Procede into mode 3 via cruise control activation.

Here is an extract from the Procede instructions. One of these commands resets the BMW DME.

Step 5: Once uploaded, go to Mode 3 on the Command Center and do commands 12 thru 1 (12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1 in that order).

Hope that helps!

enrita · 06-10-2011, 01:54 PM

you dont need to do 12 since its AT adaptations reset.

clairvoyant · 06-10-2011, 02:28 PM

Isn't that reset strictly for the Procede tune itself, not the DME?

Quote:

Originally Posted by Ilma

Yes....you can reset the car's ECU using the Procede.

IIRC it's one of the resets available when you put the Procede into mode 3 via cruise control activation.

Here is an extract from the Procede instructions. One of these commands resets the BMW DME.

Step 5: Once uploaded, go to Mode 3 on the Command Center and do commands 12 thru 1 (12, 11, 10, 9, 8, 7, 6, 5, 4, 3, 2, 1 in that order).

Hope that helps!

enrita · 06-10-2011, 02:33 PM

Quote:

Originally Posted by clairvoyant

Isn't that reset strictly for the Procede tune itself, not the DME?

No those are dme resets like you can do with bt tool.

06-10-2011, 10:23 AM	#1
clairvoyant Major 88 Rep 1,032 Posts Drives: Bavarian Manure Wagon (BMW) Join Date: Oct 2007 Location: 45°19′20″N, 75°50′0″W iTrader: (5) Garage List 2007 335i [5.24]	Curious on resetting DME adaptation Is there a way to reset the DME adaptation using Procede v5? I am not talking about the tune reset adaptation but the car ECU itself. Thank You
	Appreciate 0 Tweet Quote

06-10-2011, 11:02 AM	#2
v300 First Lieutenant 25 Rep 355 Posts Drives: '11 335is DCT Join Date: Mar 2010 Location: (north) Fullerton, CA iTrader: (12)	By any chance do you have an AT6? __________________ V300 '11 BSM 335is '08 Tiag 335i Coupe w/ Active Steering SOLD
	Appreciate 0 Quote

06-10-2011, 01:54 PM	#5
enrita Major General 165 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	you dont need to do 12 since its AT adaptations reset. __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote