What meth mixes u guys use???

Chrisred · 07-08-2011, 10:38 AM

.....

lamia2super · 07-08-2011, 10:41 AM

heres a video i did not to long ago. the first one might be 50/50 and the second one is a pretty big flame which is probably around 75/25

also ive had this meth for almost a year now and its still very flammable

Willizm · 07-08-2011, 10:44 AM

Glad you asked, I'm looking into this as well. i figure I'll start out 50/50, but will give VP M1 and denatured alcohol a try. It seems like both of those are used interchangeably. Basically whichever is cheaper and available in your area. If I go to the strip I might try to run the tank down and then mix in a 80/20 then when I leave the strip dilute it with more distilled water to bring it back to about 50/50

Willizm · 07-08-2011, 10:46 AM

Quote:

Originally Posted by lamia2super

heres a video i did not to long ago. the first one might be 50/50 and the second one is a pretty big flame which is probably around 75/25

also ive had this meth for almost a year now and its still very flammable

[u2b]

[/u2b]

what type of meth are you using? Where did you get it? Reason I ask is that I hear you should get something as pure as possible such as the M1 or denatured alky. This way you aren't getting something that has additives.

lamia2super · 07-08-2011, 10:47 AM

Quote:

Originally Posted by Willizm

what type of meth are you using? Where did you get it? Reason I ask is that I hear you should get something as pure as possible such as the M1 or denatured alky. This way you aren't getting something that has additives.

i forget the brand buts 99.98% meth

Jeff@TopGearSolutions · 07-08-2011, 10:48 AM

90-100% Meth

I recommend no more then 70 (Meth)/30

Vp M1

chingy24 · 07-08-2011, 10:53 AM

Quote:

Originally Posted by Jeff@topgearsolutions

90-100% Meth

I recommend no more then 70 (Meth)/30

Vp M1

Jeff,
What are you mixing with your VP M1? Also have you ever tried their M3 or M5?

Willizm · 07-08-2011, 11:03 AM

Quote:

Originally Posted by chingy24

Jeff,
What are you mixing with your VP M1? Also have you ever tried their M3 or M5?

I think the m3 and m5 has additives. Whether they should be used or not I'm unsure, but I don't think many use it. I believe you should mix with distilled water.

chingy24 · 07-08-2011, 11:07 AM

Yeah I mix my M1 with distilled water. I know the M3 and M5 have nitro in it and I didn't know if somebody was brave enough to try it or would it just be a waste of money.

Longboarder · 07-08-2011, 11:11 AM

What about for just daily driving? Shiv recommended boost juice (50/50 mix) so i picked up a 4 gallon pack of that, but if there is a more potent (and safe) mix i may try that. Thanks.

Forcefed3 · 07-08-2011, 11:16 AM

70/30

scottp999 · 07-08-2011, 11:18 AM

I'm about 75/25. I use VP M1 and also have boost juice around to cut it down to the right percentage. Last time I ordered boost juice, the most reasonable shipping was at the Summit Racing web site. I pick up 5 gal VP M1 locally and there is also a Shell Racing Fuel station that has 5 gal cans of World Wide Racing 100% meth.

FYI - VP Racing fuels explicitly says to not use M3 or M5 in methanol injection kits. It's for cars that run methanol as the primary fuel.

chingy24 · 07-08-2011, 11:20 AM

Quote:

Originally Posted by Longboarder

What about for just daily driving? Shiv recommended boost juice (50/50 mix) so i picked up a 4 gallon pack of that, but if there is a more potent (and safe) mix i may try that. Thanks.

I use VP M1 because I have a dealer a couple mile away from my house. I do mix it with distilled water from walmart. I have tried the boost juice before and it was good too but I'm more of a 75/25 guy!!

It might just be in my head but it seems like the car is a little bit faster using my own mix.

chingy24 · 07-08-2011, 11:22 AM

Quote:

Originally Posted by scottp999

I'm about 75/25. I use VP M1 and also have boost juice around to cut it down to the right percentage. Last time I ordered boost juice, the most reasonable shipping was at the Summit Racing web site. I pick up 5 gal VP M1 locally and there is also a Shell Racing Fuel station that has 5 gal cans of World Wide Racing 100% meth.

FYI - VP Racing fuels explicitly says to not use M3 or M5 in methanol injection kits. It's for cars that run methanol as the primary fuel.

Yeah that is pretty much what my VP dealer said too, but he did say that there is alot of dirt track racers in my area that use it on the side and not as the primary fuel.

I do know that it is a lot more expensive. I think M3 was double the price of M1 and M5 was even more than that.

cn555ic · 07-08-2011, 11:24 AM

75/25

Syndicategt · 07-08-2011, 11:27 AM

Boost Juice which is 50/50

Willizm · 07-08-2011, 11:29 AM

Quote:

Originally Posted by Longboarder

What about for just daily driving? Shiv recommended boost juice (50/50 mix) so i picked up a 4 gallon pack of that, but if there is a more potent (and safe) mix i may try that. Thanks.

For daily driving I wouldn't do anything more than 50/50 just from a safety prospective. You get hit and the tank gets ruptured you might be thankful that you aren't running a high concentration of meth. Boost juice takes the thought out of doing your own mixing. I'm probably going to start out with a couple of gallons to make sure the system is working right then go to mixing.

Mike@N54Tuning.com · 07-08-2011, 11:31 AM

I run 80/20 mixed with distilled water

Mike

Chrisred · 07-08-2011, 11:39 AM

Quote:

Originally Posted by Mike@N54Tuning.com

I run 80/20 mixed with distilled water

Mike

What about deionized water??? Is it same as distilled??

SSIMPS · 07-08-2011, 11:40 AM

I have to run 100% on my M3 (HPF requires) but 75/25 on my 135i

Jeff@TopGearSolutions · 07-08-2011, 12:45 PM

Quote:

Originally Posted by chingy24

Jeff,
What are you mixing with your VP M1? Also have you ever tried their M3 or M5?

Distilled water. Ive only used VP M1 or Denatured Alcohol.

Mike@N54Tuning.com · 07-08-2011, 12:50 PM

Quote:

Originally Posted by Chrisred

What about deionized water??? Is it same as distilled??

Pretty much. De-ionized is actually more pure water so you're good

Mike

07-08-2011, 10:38 AM	#1
Chrisred Captain 74 Rep 788 Posts Drives: BMW 335xi coupe Join Date: Jan 2010 Location: Montreal, Canada iTrader: (0)	What meth mixes u guys use??? ..... __________________ JB4 Trebila tuned cp-e IC AMS exhaust BMS DCI AR DP's METH RB TURBO 19" VMR VB3 Stoptech BBK TC KLINE VORSHLAG SPEC STG 3 OSS design
	Appreciate 0 Tweet Quote

07-08-2011, 10:41 AM	#2
lamia2super Colonel 145 Rep 2,661 Posts Drives: 335i Join Date: May 2008 Location: Miami Beach, FL iTrader: (4) Garage List 2007 335i [10.00]	heres a video i did not to long ago. the first one might be 50/50 and the second one is a pretty big flame which is probably around 75/25 also ive had this meth for almost a year now and its still very flammable __________________ FOR SALE https://www.e90post.com/forums/showt...0#post25342440 Last edited by lamia2super; 07-08-2011 at 10:49 AM.. Reason: fixed the link
	Appreciate 0 Quote

07-08-2011, 10:44 AM	#3
Willizm Captain 26 Rep 610 Posts Drives: 2009 335Xi and 01 Trans Am WS6 Join Date: Oct 2009 Location: Joliet, Il iTrader: (0)	Glad you asked, I'm looking into this as well. i figure I'll start out 50/50, but will give VP M1 and denatured alcohol a try. It seems like both of those are used interchangeably. Basically whichever is cheaper and available in your area. If I go to the strip I might try to run the tank down and then mix in a 80/20 then when I leave the strip dilute it with more distilled water to bring it back to about 50/50 __________________ 335i - stock for now Escalade - Urban Assault Vehicle T/A - Forged ls1, PT8285 turbo, heads, cam, 4l80e w/Transbrake, s60 rear on e85.
	Appreciate 0 Quote

07-08-2011, 10:48 AM	#6
Jeff@TopGearSolutions 3461 Rep 79,211 Posts Drives: C6 Z06, 09 335i, 10 335xi Join Date: Dec 2008 Location: www.TopGearSolutions.com iTrader: (37)	90-100% Meth I recommend no more then 70 (Meth)/30 Vp M1
	Appreciate 0 Quote

07-08-2011, 11:07 AM	#9
chingy24 Second Lieutenant 2 Rep 207 Posts Drives: 3351 Join Date: Jan 2010 Location: USA iTrader: (8)	Yeah I mix my M1 with distilled water. I know the M3 and M5 have nitro in it and I didn't know if somebody was brave enough to try it or would it just be a waste of money.
	Appreciate 0 Quote

07-08-2011, 11:11 AM	#10
Longboarder Major General 3488 Rep 6,788 Posts Drives: 2016 BMW i8 Join Date: Dec 2006 Location: Monarch Beach iTrader: (1) Garage List 2012 BMW e92 M3 [0.00] 2021 BMW X5M [10.00] 2015 Porsche 991 Tu ... [10.00] 2015 Porsche 991 GT3 [10.00]	What about for just daily driving? Shiv recommended boost juice (50/50 mix) so i picked up a 4 gallon pack of that, but if there is a more potent (and safe) mix i may try that. Thanks. __________________ Current BMWs: 2022 X5 40i, 2016 X5 50i 2015 Porsche 991 Turbo S 1979 Porsche 911 Turbo (930) a couple others IG: longboarder949; YouTube: https://www.youtube.com/channel/UCT1...eoFBszPIK0gf9w
	Appreciate 0 Quote

07-08-2011, 11:16 AM	#11
Forcefed3 Banned 129 Rep 4,732 Posts Drives: 2008 335i Join Date: May 2010 Location: South iTrader: (2) Garage List 2008 335i [1.00]	70/30
	Appreciate 0 Quote

07-08-2011, 11:18 AM	#12
scottp999 Brigadier General 136 Rep 4,764 Posts Drives: 4runner SR5 Join Date: Mar 2007 Location: MD iTrader: (2) Garage List 2007 BMW 335 [9.00]	I'm about 75/25. I use VP M1 and also have boost juice around to cut it down to the right percentage. Last time I ordered boost juice, the most reasonable shipping was at the Summit Racing web site. I pick up 5 gal VP M1 locally and there is also a Shell Racing Fuel station that has 5 gal cans of World Wide Racing 100% meth. FYI - VP Racing fuels explicitly says to not use M3 or M5 in methanol injection kits. It's for cars that run methanol as the primary fuel.
	Appreciate 0 Quote

07-08-2011, 11:24 AM	#15
cn555ic 460 Rep 18,331 Posts Drives: 335i Join Date: Jun 2007 Location: US iTrader: (6)	75/25
	Appreciate 0 Quote

07-08-2011, 11:27 AM	#16
Syndicategt Brigadier General 164 Rep 3,730 Posts Drives: 335i Join Date: Sep 2009 Location: Nor Cal iTrader: (11)	Boost Juice which is 50/50 __________________ 2008 BMW 335i e90 - Sold - Rob Beck Turbos / PROcede V5 / Aquamist HFS-4 / AR Downpipes / AE Exhaust / ER Comp FMIC / ER CP / TiAL BOV / Custom Intake / RPI Scoops / Quaife LSD / Swift-Koni Coilovers / DSS HS / Morr VS8.2 Sig Black / Michelin PSS / P3 Boost Guage / M3 body / M3 steering wheel / Adam's Rotors / Hawk HPS / SS lines /
	Appreciate 0 Quote

07-08-2011, 11:31 AM	#18
Mike@N54Tuning.com Joint Chiefs of Staff 5017 Rep 116,150 Posts Drives: 2007 335i, 2015 M3 Join Date: Dec 2008 Location: N54tuning.com iTrader: (89)	I run 80/20 mixed with distilled water Mike
	Appreciate 0 Quote

07-08-2011, 11:40 AM	#20
SSIMPS Lieutenant 140 Rep 571 Posts Drives: 2025 X5 50e Join Date: Dec 2008 Location: California iTrader: (2)	I have to run 100% on my M3 (HPF requires) but 75/25 on my 135i __________________ 2025 X5 50e 2024 M5 Competition 2015 M4 6MT - JB4 / Gintani DPs 2005 M3 6MT - VF Engineering S/C / KW / StopTech / Dinan / HPF Stage III (removed)- Track Toy
	Appreciate 0 Quote