Results are in: RB & Nitrous

GeorgeSmooth · 07-22-2011, 06:31 PM

I managed to get the car run on the dyno today.
Conditions where 15 degrees Celsius, 45% humidity, 5450ft altitude.
The dyno I used is similar to the Mustang dynos in terms of power output.
The car was run with 109octane and NO meth as we start going through our testing stages.
Mods are RB's, AR Dp, Helix Cooler, AE Exhaust
Stock Boost base run the car made 276hp non SAE. This is about 25hp than the average N54 on this dyno.
On 14.5psi which we decided to test today was 509hp and 544lb ft. This with a .40 nitros jet and .23 fuel at 50 psi fuel pressure and a 94% setting on the progressive.
The guy had his printer in for repair so the dyno graph will follow but we do have a drop in power 6200rpm and up due to the altitude.
All in all I am happy with the power output and its within the range I expected. Next weekend we will test the benefits of the methanol on top of this and will up the boost a bit and see what happens.
Guys that read this do not forget the altitude I am at and the average FBO N54 gains 35whp going to the coast.
The car is lethal on the road so now lets hope the track manages to hold the power on Sunday. Will keep you guys updated.

Here is a picture someone took of some of the runs from the beginning of the testing.

We cleaned up the top eventually with the drop off starting at 6200rpm. The turbo's suffer at this altitude badly.

Forcefed3 · 07-22-2011, 06:37 PM

Cant wait to see time slips!

sear · 07-22-2011, 06:42 PM

Congrats, that's very nice for altitude. Is the track your heading to above 5k ft as well?

you really have to pay extra for same HP @ altitude for sure

GeorgeSmooth · 07-22-2011, 06:44 PM

Quote:

Originally Posted by sear

Congrats, that's very nice for altitude. Is the track your heading to above 5k ft as well?

you really have to pay extra for same HP @ altitude for sure

Same hight. Full interior with RB's the best I have managed is 11.9 with a 1.69 60ft so its far of the pace of the coastal tracks.

sear · 07-22-2011, 06:51 PM

Quote:

Originally Posted by GeorgeSmooth

Same hight. Full interior with RB's the best I have managed is 11.9 with a 1.69 60ft so its far of the pace of the coastal tracks.

Breaking into the 11s @ altitude is no small feat. I'm guessing ambient temps were favorable for that run?

Looking forward to see how your next trip to the track goes...

i'm also interested to see your dyno curve with just RBs. I'm @ 6k ft and TQ falloff on stock turbos was steep at 4500rpm running 14.5psi

bulldog_yyc · 07-22-2011, 07:12 PM

Litos · 07-22-2011, 07:30 PM

these RB turbos are not "bigger wheels in stock turbo housings" are they !??!

are these RB's extremely noticeable ???

Forcefed3 · 07-22-2011, 07:45 PM

Quote:

Originally Posted by Litos

these RB turbos are not "bigger wheels in stock turbo housings" are they !??!

are these RB's extremely noticeable ???

Yes.

dzenno · 07-22-2011, 07:48 PM

there's tons of info on the RBs here and on n54tech.com...do some searching, they're not "just" compressor wheels..

George buddy, amazing!!! Hit the track! You're giving me hope for a NOS setup

I'd like to see that AFR with that much to the ground

Litos · 07-22-2011, 07:48 PM

ok, i'll go do some research to see how much bigger they are.

jpsimon · 07-22-2011, 07:57 PM

Quote:

Originally Posted by Litos

ok, i'll go do some research to see how much bigger they are.

they're a full upgrade, turbine, compressor wastegate assembly. they're the real awesome deal

Litos · 07-22-2011, 08:00 PM

Quote:

Originally Posted by jpsimon

they're a full upgrade, turbine, compressor wastegate assembly. they're the real awesome deal

yeah, i see that now.

some other company was supposed to come out with some "stealth" turbo's that are upgrades, but they kept the stock housings to give it a "stock turbo" appearence.

dealership wouldn't ever think that these turbos had been tampered with unless they unbolted them and started molesting the insides, HAHA !!!

Jimefam · 07-22-2011, 09:30 PM

Looking good George how's the tuning with the nitrous?

GeorgeSmooth · 07-23-2011, 09:26 AM

Quote:

Originally Posted by Jimefam

Looking good George how's the tuning with the nitrous?

The tuning was relatively simple.
Timing stayed between 15 down to 11's.
AFR's run around 13 at 3500 down to 12.2 at 6000. We needed to alter the map a bit in terms of AFR's as the jet would not keep the optimal fueling right through the rpm range. The intention is to add methanol which I will do next weekend and the fueling should be perfect.
I will then flash back to stock and try out the Procede with its latest access tricks.

enrita · 07-23-2011, 09:44 AM

keep up the good work!

GeorgeSmooth · 07-23-2011, 09:56 AM

Updated with dyno picture.

dzenno · 07-23-2011, 10:17 AM

This has 600whp written all over it, easy, at sea level...great work George! if there was only more of us pioneering things on this platform

blisstik · 07-23-2011, 11:46 AM

Man. I so want RB turbos with some Procede. What kind of WHP can you get without meth and/or nitrous?

GeorgeSmooth · 07-23-2011, 04:18 PM

We had a look at the dyno picture tonight and have concluded that the rpm is incorrect on it. What reads as 5500 is actually at 6000rpm. The dynos require you to ride the car to 3500rpm and press a button to learn rpms and it seems this one is out. At 6000rpm we let out the gas and lower it over 250rpm to 50% on controller before shutting it off. Need to get back and get this sorted. We realized this as we did the tuning in third gear and this is a fourth gear run. Phew I am a bit relieved as I was about to go shift at 5700 hehe

Jeff@TopGearSolutions · 07-23-2011, 05:05 PM

Good catch. Good luck with it.

07-22-2011, 06:31 PM	#1
GeorgeSmooth Lieutenant 40 Rep 565 Posts Drives: 2008 E90 335i AT Join Date: Feb 2008 Location: South Africa iTrader: (0)	Results are in: RB & Nitrous I managed to get the car run on the dyno today. Conditions where 15 degrees Celsius, 45% humidity, 5450ft altitude. The dyno I used is similar to the Mustang dynos in terms of power output. The car was run with 109octane and NO meth as we start going through our testing stages. Mods are RB's, AR Dp, Helix Cooler, AE Exhaust Stock Boost base run the car made 276hp non SAE. This is about 25hp than the average N54 on this dyno. On 14.5psi which we decided to test today was 509hp and 544lb ft. This with a .40 nitros jet and .23 fuel at 50 psi fuel pressure and a 94% setting on the progressive. The guy had his printer in for repair so the dyno graph will follow but we do have a drop in power 6200rpm and up due to the altitude. All in all I am happy with the power output and its within the range I expected. Next weekend we will test the benefits of the methanol on top of this and will up the boost a bit and see what happens. Guys that read this do not forget the altitude I am at and the average FBO N54 gains 35whp going to the coast. The car is lethal on the road so now lets hope the track manages to hold the power on Sunday. Will keep you guys updated. Here is a picture someone took of some of the runs from the beginning of the testing. We cleaned up the top eventually with the drop off starting at 6200rpm. The turbo's suffer at this altitude badly. __________________ 08 E90 335i AT RB Turbos -NX Wet Kit - Chiplogic Flash or Procede V5- M3 Diff - AE Exhaust- Forge Dv's - Helix Intercooler - AR DP's - P3 Boost Gauge - Vishnu Meth- Stett Chargepipe and CAI 09 C63 Last edited by GeorgeSmooth; 07-23-2011 at 09:55 AM..
	Appreciate 0 Tweet Quote

07-22-2011, 06:37 PM	#2
Forcefed3 Banned 131 Rep 4,732 Posts Drives: 2008 335i Join Date: May 2010 Location: South iTrader: (2) Garage List 2008 335i [1.00]	Cant wait to see time slips!
	Appreciate 0 Quote

07-22-2011, 06:42 PM	#3
sear Lieutenant 21 Rep 462 Posts Drives: 2007 335xi Join Date: Sep 2009 Location: Colorado Springs iTrader: (0)	Congrats, that's very nice for altitude. Is the track your heading to above 5k ft as well? you really have to pay extra for same HP @ altitude for sure
	Appreciate 0 Quote

07-22-2011, 07:12 PM	#6
bulldog_yyc Major General 136 Rep 5,040 Posts Drives: GT3RS Join Date: Oct 2008 Location: probably work iTrader: (28)
	Appreciate 0 Quote

07-22-2011, 07:30 PM	#7
Litos Banned 222 Rep 2,991 Posts Drives: 2012 Challenger RT Junk Join Date: Dec 2010 Location: Houston/Pearland iTrader: (1)	these RB turbos are not "bigger wheels in stock turbo housings" are they !??! are these RB's extremely noticeable ???
	Appreciate 0 Quote

07-22-2011, 07:48 PM	#9
dzenno Banned 286 Rep 5,876 Posts Drives: Join Date: Feb 2006 iTrader: (1)	there's tons of info on the RBs here and on n54tech.com...do some searching, they're not "just" compressor wheels.. George buddy, amazing!!! Hit the track! You're giving me hope for a NOS setup I'd like to see that AFR with that much to the ground
	Appreciate 0 Quote

07-22-2011, 09:30 PM	#13
Jimefam Second Lieutenant 13 Rep 226 Posts Drives: 2011 550I Msport Join Date: Jul 2010 Location: Cumming, Ga iTrader: (0)	Looking good George how's the tuning with the nitrous?
	Appreciate 0 Quote

07-23-2011, 09:44 AM	#15
enrita Major General 161 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	keep up the good work! __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

07-23-2011, 09:56 AM	#16
GeorgeSmooth Lieutenant 40 Rep 565 Posts Drives: 2008 E90 335i AT Join Date: Feb 2008 Location: South Africa iTrader: (0)	Updated with dyno picture. __________________ 08 E90 335i AT RB Turbos -NX Wet Kit - Chiplogic Flash or Procede V5- M3 Diff - AE Exhaust- Forge Dv's - Helix Intercooler - AR DP's - P3 Boost Gauge - Vishnu Meth- Stett Chargepipe and CAI 09 C63
	Appreciate 0 Quote

07-23-2011, 10:17 AM	#17
dzenno Banned 286 Rep 5,876 Posts Drives: Join Date: Feb 2006 iTrader: (1)	This has 600whp written all over it, easy, at sea level...great work George! if there was only more of us pioneering things on this platform
	Appreciate 0 Quote

07-23-2011, 11:46 AM	#18
blisstik Lieutenant Colonel 159 Rep 1,677 Posts Drives: E92 Join Date: Jul 2009 Location: California iTrader: (14)	Man. I so want RB turbos with some Procede. What kind of WHP can you get without meth and/or nitrous?
	Appreciate 0 Quote

07-23-2011, 04:18 PM	#19
GeorgeSmooth Lieutenant 40 Rep 565 Posts Drives: 2008 E90 335i AT Join Date: Feb 2008 Location: South Africa iTrader: (0)	We had a look at the dyno picture tonight and have concluded that the rpm is incorrect on it. What reads as 5500 is actually at 6000rpm. The dynos require you to ride the car to 3500rpm and press a button to learn rpms and it seems this one is out. At 6000rpm we let out the gas and lower it over 250rpm to 50% on controller before shutting it off. Need to get back and get this sorted. We realized this as we did the tuning in third gear and this is a fourth gear run. Phew I am a bit relieved as I was about to go shift at 5700 hehe __________________ 08 E90 335i AT RB Turbos -NX Wet Kit - Chiplogic Flash or Procede V5- M3 Diff - AE Exhaust- Forge Dv's - Helix Intercooler - AR DP's - P3 Boost Gauge - Vishnu Meth- Stett Chargepipe and CAI 09 C63
	Appreciate 0 Quote

07-23-2011, 05:05 PM	#20
Jeff@TopGearSolutions 3472 Rep 79,211 Posts Drives: C6 Z06, 09 335i, 10 335xi Join Date: Dec 2008 Location: www.TopGearSolutions.com iTrader: (37)	Good catch. Good luck with it.
	Appreciate 0 Quote