[cn555ic]

I was changing nozzles from DO7 main to a M10 for the main nozzle...I was running out of fuel lines and had one left and tried to make it work! lol
Well after testing it out I logged it with Procede and saw flow but what I found wierd was my IATs was dropping slightly which with a m10 it should drop drastically! Anyway kept getting on it to get meth to flow but same high IATs...Next thing I see is my SES light blinking 5 times repeatedly every 5 seconds which triggers the meth overflow/leak warning What do you know I looked under the hood and the meth fuel line to the nozzle was not secure and meth droplets all over the place because I didnt have that extra 2mm of length which I tried to push it into the push fitting which made it leak when the pump was activated! Its great to know that this function still works as advertised on the Procede..I am not sure of the others as I still dont have valet speed delimiter back functioning.

Anyhow what a great feature to have!

[cn555ic]

Just went out and bought some more meth fuel lines and its back to reading steady 29 with my M10 nozzle...One thing I have to say is that DO7 compared to the M10 as for performance....M10 is soooo much better and anyone still running a D07 or M7 or CM7 change it out and go with the larger nozzle for sure...BIG difference
I was swapping back and forth the main injection nozzles and each time there was a noticeable power gain using the M10 compared to using the DO7 nozzle. I thought it was too much but after testing it, I will never go back to the smaller nozzle again for my main nozzle injector. The DO7 will be used only with nitrous activation

[Beemw335]

Good to hear! I juat might have to get meth one of these days

[OpenFlash]

lol... that overflow alert got me a couple of times as well. Both times I forgot to push the meth line onto the nozzle barb. I'm working on an airbag activation. ie, having it POP out when you forget to do something like that.