Broke a wheel bolt inside the hub, who can remove it?

2M · 11-13-2011, 10:53 PM

Can any shops or members on here remove a broken bolt inside the hub? It is broken inside and it is not sticking out the hub when the wheel is removed. Who can help ?

tibra1 · 11-13-2011, 10:57 PM

You gotta drill it out.

Bighorns · 11-13-2011, 11:00 PM

Have you tried an "easy-out"? If you start with a real small drill bit to get your hole well-centered, then work up, you should be able to do this yourself, or you can take it to someone and have this done.

itsbrokeagain · 11-13-2011, 11:23 PM

the problem is, if its rusted in there its either cross threaded or seized. and easy out wont get it out unless it snapped on entry.

It will have to be redrilled and tapped, worst case scenario you get a new bearing a hub to be pressed in.

11-13-2011, 10:53 PM	#1
2M Colonel 510 Rep 2,200 Posts Drives: Mineral Grey M2 Join Date: Sep 2009 Location: New York iTrader: (2)	Broke a wheel bolt inside the hub, who can remove it? Can any shops or members on here remove a broken bolt inside the hub? It is broken inside and it is not sticking out the hub when the wheel is removed. Who can help ? __________________ E9X Picture Game: 8 points: (High visibility jacket; Strip Club; Pizzeria; Sobriety Test; E9x dressed for Halloween, Billiards, Oil Change, Orange Cone)
	Appreciate 0 Tweet Quote

11-13-2011, 10:57 PM	#2
tibra1 Banned 132 Rep 6,773 Posts Drives: 2011 ZCP M3 - 2007 335i crashd Join Date: Apr 2009 Location: NYC iTrader: (4)	You gotta drill it out.
	Appreciate 0 Quote

11-13-2011, 11:00 PM	#3
Bighorns bimmer newb 15 Rep 334 Posts Drives: 2010 335i M-Sport Join Date: Nov 2009 Location: Hi Dez CA iTrader: (0)	Have you tried an "easy-out"? If you start with a real small drill bit to get your hole well-centered, then work up, you should be able to do this yourself, or you can take it to someone and have this done.
	Appreciate 0 Quote

11-13-2011, 11:23 PM	#4
itsbrokeagain 314 Rep 15,747 Posts Drives: 1999 528iT, E53 X5, E46 325xi Join Date: Mar 2007 Location: Strong Island iTrader: (7)	the problem is, if its rusted in there its either cross threaded or seized. and easy out wont get it out unless it snapped on entry. It will have to be redrilled and tapped, worst case scenario you get a new bearing a hub to be pressed in.
	Appreciate 0 Quote