:)

bimmerboi · 05-11-2007, 05:17 PM

HellFish · 05-11-2007, 05:23 PM

wow what dealership? I live in the Dallas area as well... Do you have procede?

schneid4323 · 05-11-2007, 05:25 PM

Which dealership, and which SA, if you want to PM me that Ill see what can happen

bimmerboi · 05-11-2007, 05:25 PM

Quote:

Originally Posted by HellFish

wow what dealership? I live in the Dallas area as well... Do you have procede?

schneid4323 · 05-11-2007, 05:26 PM

Quote:

Originally Posted by bimmerboi

BMW of Dallas and yes

then deffinatly what SA? PM me that

kujo · 05-11-2007, 05:27 PM

if you did have a PROcede, it's not too brite to post here about this situation.
They can figure things out mate.

kj

CASHBY · 05-11-2007, 05:32 PM

this again.... yea I wouldnt post any information on here.

Little BIMPORT might come rat you out like he trys to do to everoyne else....

however I can tell you that BMWNA will find nothing withe ECU Data if you had PROcede once before....it is 100% invisible to the ECU and they can not detect it.... so dotn worry about them finding any DATA in the ECU.

533ogetnom · 05-11-2007, 05:32 PM

you do know there not idiots right? im sure they know you had the procede in there and its a friendly cryptic " hey we know you modded your car, next time dont fuck up and make it harder to figure out"

its not hard for them to figure out which cars have the procede installed when they have electrical tape residue all over the ECU wires...

Terry335 · 05-11-2007, 05:37 PM

Quote:

Originally Posted by 533ogetnom

you do know there not idiots right? im sure they know you had the procede in there and its a friendly cryptic " hey we know you modded your car, next time dont fuck up and make it harder to figure out"

its not hard for them to figure out which cars have the procede installed when they have electrical tape residue all over the ECU wires...

...and rounded air filter bolts.

CASHBY · 05-11-2007, 05:38 PM

Quote:

Originally Posted by 533ogetnom

you do know there not idiots right? im sure they know you had the procede in there and its a friendly cryptic " hey we know you modded your car, next time dont fuck up and make it harder to figure out"

its not hard for them to figure out which cars have the procede installed when they have electrical tape residue all over the ECU wires...

this is true as well.... if you do have it and are going to take it out, make sure it looks damn near stock and the resiude is a dead give away as well.

bimmerboi · 05-11-2007, 05:41 PM

Quote:

Originally Posted by CEA 3

this is true as well.... if you do have it and are going to take it out, make sure it looks damn near stock and the resiude is a dead give away as well.

tek818 · 05-11-2007, 05:54 PM

Quote:

Originally Posted by CEA 3

however I can tell you that BMWNA will find nothing withe ECU Data if you had PROcede once before....it is 100% invisible to the ECU and they can not detect it.... so dotn worry about them finding any DATA in the ECU.

How about boost targets not reached and limp modes that are logged? Though it is not conclusive evidence, couldn't that be an indicator that PROcede was installed?

Terry335 · 05-11-2007, 05:57 PM

Let's just say people should clear all history codes before going in.

tek818 · 05-11-2007, 05:59 PM

How? Isn't there a perm log?

Terry335 · 05-11-2007, 06:00 PM

You can clear them with a code reader, etc. If the car still runs semi-OK you can disconnect the battery once stock, and then drive for a few days before taking it in.

schneid4323 · 05-11-2007, 06:04 PM

Quote:

Originally Posted by bimmerboi

maybe that was the case! :mad: oh well next time i'll know to clean all that residue up COMPLETELY.

and match the wires

schneid4323 · 05-11-2007, 06:04 PM

Quote:

Originally Posted by AB Tek 818

How about boost targets not reached and limp modes that are logged? Though it is not conclusive evidence, couldn't that be an indicator that PROcede was installed?

Limp mode isnt logged btw.

bimmerboi · 05-11-2007, 06:06 PM

tek818 · 05-11-2007, 06:06 PM

Quote:

Originally Posted by schneid4323

Limp mode isnt logged btw.

whew!

schneid4323 · 05-11-2007, 06:07 PM

Quote:

Originally Posted by bimmerboi

LOL

YES SIR will do...Thanks again for the help otherwise i woulda never known....

Not a problem, gotta keep the board safe right?

ac2 · 05-11-2007, 06:16 PM

Even my car with Procede is runing great(No check engine light), it still trigger an error code and store at ECU when the car is at standby(No check engine light too). I think all the Procede 335 on the road is making the same error code, the C-reader can't read the code, and of course you can't clear it with C-reader.

BzzzBom · 05-11-2007, 06:56 PM

Another reason to wait for the BMW reflash.

05-11-2007, 05:17 PM	#1
bimmerboi Private First Class 6 Rep 157 Posts Drives: BMW 335i Join Date: Jan 2007 Location: Dallas, Texas iTrader: (0)	:) Last edited by bimmerboi; 05-11-2007 at 08:05 PM..
	Appreciate 0 Tweet Quote

05-11-2007, 05:23 PM	#2
HellFish Private First Class 7 Rep 129 Posts Drives: 07 335i Coupe Join Date: Feb 2007 Location: Dallas iTrader: (0)	wow what dealership? I live in the Dallas area as well... Do you have procede? __________________ 2007 335i Coupe \| Graphite \| Black Dakota \| Premium \| Sport \| Nav \| Heated Seats \| Comfort \| Aero \|
	Appreciate 0 Quote

05-11-2007, 05:25 PM	#3
schneid4323 Banned 345 Rep 1,134 Posts Drives: 335i, M6 Join Date: Dec 2006 Location: Dallas TX iTrader: (0)	Which dealership, and which SA, if you want to PM me that Ill see what can happen
	Appreciate 0 Quote

05-11-2007, 05:27 PM	#6
kujo Major 151 Rep 1,153 Posts Drives: BMW Join Date: May 2006 Location: LA, CA USA iTrader: (1)	if you did have a PROcede, it's not too brite to post here about this situation. They can figure things out mate. kj
	Appreciate 0 Quote

05-11-2007, 05:32 PM	#7
CASHBY 171 Rep 2,114 Posts Drives: E90 335 "done up" Join Date: Dec 2006 Location: GARAGE iTrader: (2)	this again.... yea I wouldnt post any information on here. Little BIMPORT might come rat you out like he trys to do to everoyne else.... however I can tell you that BMWNA will find nothing withe ECU Data if you had PROcede once before....it is 100% invisible to the ECU and they can not detect it.... so dotn worry about them finding any DATA in the ECU.
	Appreciate 0 Quote

05-11-2007, 05:32 PM	#8
533ogetnom Banned 102 Rep 1,760 Posts Drives: 335coupe Join Date: Apr 2007 Location: Florida iTrader: (1)	you do know there not idiots right? im sure they know you had the procede in there and its a friendly cryptic " hey we know you modded your car, next time dont fuck up and make it harder to figure out" its not hard for them to figure out which cars have the procede installed when they have electrical tape residue all over the ECU wires...
	Appreciate 0 Quote

05-11-2007, 05:57 PM	#13
Terry335 Banned 104 Rep 2,587 Posts Drives: 335i Join Date: Jan 2007 Location: Socal iTrader: (0)	Let's just say people should clear all history codes before going in.
	Appreciate 0 Quote

05-11-2007, 05:59 PM	#14
tek818 Lieutenant Colonel 140 Rep 1,953 Posts Drives: 2020 X3M Competition Join Date: Mar 2007 Location: Los Angeles, CA iTrader: (2) Garage List 2018 M3 ZCP [9.50]	How? Isn't there a perm log?
	Appreciate 0 Quote

05-11-2007, 06:00 PM	#15
Terry335 Banned 104 Rep 2,587 Posts Drives: 335i Join Date: Jan 2007 Location: Socal iTrader: (0)	You can clear them with a code reader, etc. If the car still runs semi-OK you can disconnect the battery once stock, and then drive for a few days before taking it in.
	Appreciate 0 Quote

05-11-2007, 06:06 PM	#18
bimmerboi Private First Class 6 Rep 157 Posts Drives: BMW 335i Join Date: Jan 2007 Location: Dallas, Texas iTrader: (0)	Last edited by bimmerboi; 05-11-2007 at 08:01 PM..
	Appreciate 0 Quote

05-11-2007, 06:16 PM	#21
ac2 Private 5 Rep 85 Posts Drives: E92 Join Date: May 2006 Location: N.E. iTrader: (1)	Even my car with Procede is runing great(No check engine light), it still trigger an error code and store at ECU when the car is at standby(No check engine light too). I think all the Procede 335 on the road is making the same error code, the C-reader can't read the code, and of course you can't clear it with C-reader. __________________ E92 335i Last edited by ac2; 05-11-2007 at 10:38 PM..
	Appreciate 0 Quote

05-11-2007, 06:56 PM	#22
BzzzBom Major 97 Rep 1,216 Posts Drives: 05 R53 MINI / 09 335i Coupe Join Date: Jul 2006 Location: Los Angeles iTrader: (0)	Another reason to wait for the BMW reflash.
	Appreciate 0 Quote