PROcede v4 Rev2

Pete-L · 12-02-2011, 07:55 AM

Hello,

I have been offered a V4 PROcede Rev2 that was used on another car. Are there any limitations of going for a Rev2 rather than a Rev2.5/3? Would I also be correct in assuming I will need to buy an additional vehicle license as this is 2nd hand?

Finally will I be stuck on V4 or can teh Rev2 be upgraded to V5?

The cars a stock 335i UK spec. So any other things I should look out for would be much appreciated.

Thanks,
Pete

enrita · 12-02-2011, 08:09 AM

you are stuck on V4 . to go v5 you need to purchase a new vin code license and send the box to vishnu for a reset.
While you are at it you can just get it upgraded to 2.5.
Since you are stock try it as it is . Gonna be enough.

Transport3r · 12-02-2011, 11:10 AM

Quote:

Originally Posted by enrita

you are stuck on V4 . to go v5 you need to purchase a new vin code license and send the box to vishnu for a reset.
While you are at it you can just get it upgraded to 2.5.
Since you are stock try it as it is . Gonna be enough.

Actually, If the unit was never upgraded to V5, it is not Vin-locked, so you can install it and then upgrade to V5 no problem!

joec500 · 12-02-2011, 12:26 PM

the nominal fee to upgrade to a 2.5 unit is worth it if you have time to send in your unit.

Jeff@TopGearSolutions · 12-02-2011, 12:58 PM

Quote:

Originally Posted by Pete-L

Hello,

I have been offered a V4 PROcede Rev2 that was used on another car. Are there any limitations of going for a Rev2 rather than a Rev2.5/3? Would I also be correct in assuming I will need to buy an additional vehicle license as this is 2nd hand?

Finally will I be stuck on V4 or can teh Rev2 be upgraded to V5?

The cars a stock 335i UK spec. So any other things I should look out for would be much appreciated.

Thanks,
Pete

If the V4 was never upgraded to V5 you can just install it as V4 and drive. You can upgrade to V5 then but you could only use updated maps from PRE rev 2.5.

There are limitations to Rev2. All the current map updates, aggressive maps (which are faster then rev 2) and the changes to fueling and ignition advance wont be available with Rev2.

For a nominal fee you can contact Vishnu and they will upgrade you to a Rev 2.5. The cost is insignificant in comparison to all the benefits and the majority would agree.

www.procedetuning.com

Pete-L · 12-03-2011, 01:32 PM

Nice one thanks folks!!!

12-02-2011, 07:55 AM	#1
Pete-L Registered 1 Rep 2 Posts Drives: BMW E92 335i Join Date: Dec 2011 Location: UK iTrader: (0)	PROcede v4 Rev2 Hello, I have been offered a V4 PROcede Rev2 that was used on another car. Are there any limitations of going for a Rev2 rather than a Rev2.5/3? Would I also be correct in assuming I will need to buy an additional vehicle license as this is 2nd hand? Finally will I be stuck on V4 or can teh Rev2 be upgraded to V5? The cars a stock 335i UK spec. So any other things I should look out for would be much appreciated. Thanks, Pete
	Appreciate 0 Tweet Quote

12-02-2011, 08:09 AM	#2
enrita Major General 161 Rep 7,377 Posts Drives: 335i - Big turbos Join Date: Sep 2008 Location: Italian in Sweden iTrader: (0)	you are stuck on V4 . to go v5 you need to purchase a new vin code license and send the box to vishnu for a reset. While you are at it you can just get it upgraded to 2.5. Since you are stock try it as it is . Gonna be enough. __________________ 07 335i AT - MOTIV 750 - MHD E85 BMS flash - BMS PI - JB4G5 - Okada Coils - NGK 5992 Plugs - Helix IC - Snow Stg. 3 - Stett CP - Custom midpipes with 100 HJS Cats - Bastuck Quad - PSS10 - QUAIFE LSD - BMS OCC - Forge DVs - AR OC - ALCON BBK - M3 Chassi - Dinan CP - Velocity M rear Toe arms - Advan RZ-DF - LUX H8 - Level 10 AT upgrade
	Appreciate 0 Quote

12-02-2011, 12:26 PM	#4
joec500 Brigadier General 133 Rep 3,049 Posts Drives: it has 4 wheels Join Date: Jul 2008 Location: Los Angeles iTrader: (11)	the nominal fee to upgrade to a 2.5 unit is worth it if you have time to send in your unit.
	Appreciate 0 Quote

12-03-2011, 01:32 PM	#6
Pete-L Registered 1 Rep 2 Posts Drives: BMW E92 335i Join Date: Dec 2011 Location: UK iTrader: (0)	Nice one thanks folks!!!
	Appreciate 0 Quote