HELP Removing door pull

Donia330i · 12-06-2011, 05:36 PM

How does one remove this????

Donia330i · 12-06-2011, 10:39 PM

Seriously?!

No one knows??

B-737 · 12-06-2011, 11:33 PM

While I've never studied the back of the door card itself, ive removed and installed E92 door cards roughly 7000 times.

Remove the torx screws you see there. Then pull the mid panel trim out from its seating pins. Remove all the torx screws from the mid door section. Remove the lower door flood light and detach it. Pull the bottom of the door towards you the work your way up the card. Pull the door card out and up. Once it's free take a look at the back of the door card and you'll see the fasteners if there are any for the handle.

Donia330i · 12-08-2011, 10:11 AM

Quote:

Originally Posted by B-737

While I've never studied the back of the door card itself, ive removed and installed E92 door cards roughly 7000 times.

Remove the torx screws you see there. Then pull the mid panel trim out from its seating pins. Remove all the torx screws from the mid door section. Remove the lower door flood light and detach it. Pull the bottom of the door towards you the work your way up the card. Pull the door card out and up. Once it's free take a look at the back of the door card and you'll see the fasteners if there are any for the handle.

Thanks!

Anyone else?

12-06-2011, 05:36 PM	#1
Donia330i Major 137 Rep 1,426 Posts Drives: 19 330i BSM Join Date: Feb 2009 Location: Atlanta, GA iTrader: (7)	HELP Removing door pull How does one remove this????
	Appreciate 0 Tweet Quote

12-06-2011, 10:39 PM	#2
Donia330i Major 137 Rep 1,426 Posts Drives: 19 330i BSM Join Date: Feb 2009 Location: Atlanta, GA iTrader: (7)	Seriously?! No one knows??
	Appreciate 0 Quote

12-06-2011, 11:33 PM	#3
B-737 Captain 50 Rep 825 Posts Drives: a car. Join Date: Sep 2010 Location: Jersey Shore iTrader: (6) Garage List 2011 328 xi [7.26]	While I've never studied the back of the door card itself, ive removed and installed E92 door cards roughly 7000 times. Remove the torx screws you see there. Then pull the mid panel trim out from its seating pins. Remove all the torx screws from the mid door section. Remove the lower door flood light and detach it. Pull the bottom of the door towards you the work your way up the card. Pull the door card out and up. Once it's free take a look at the back of the door card and you'll see the fasteners if there are any for the handle. __________________
	Appreciate 0 Quote