New Year Special

DetailAddict · 01-01-2012, 08:00 AM

Alright folks! After months of development and testing. This setup is finally ready to go! If you are looking for a direct bolt-on system to remove the secondary cats as well as resonator, this is the way to go. It allows you to mate with any muffler so you can have the flow and the sound and tips of your choice. Talk about performance and uniqueness!

If you are local and want us to mount your muffler and tips, PM me for more info!

- Direct bolt-on to stock header/primary cats
- Mandrel bends on all tubing
- Stainless steel construction throughout
- Magnaflow 2.5" dual inlet/ 3.0" single outlet Y-Pipe
- Stainless steel vband for easy install and adjustment
- Tig weld and back purged.
- Dyno proven setup
- Made in USA!

PM me with your zipcode for shipping!

Retail $960
SUPER LOW INTRO RATE!!!
Starting 01/08/12 - $749 + Tax and Shipping

Deal ends when supply runs out or Jan 31, 2012, which ever comes first.
Paypal us at sales@detailaddict.com to secure yours and we can figure out the tax and shipping after.

dbA Measurement OEM

dbA Measurement with 2 mufflers

dbA Measurement with 1 muffler only

Sound Clips

as promised!

(all recorded with iPhone. quickest way I can get them online)

Drive by 1

Drive by 2

Take off 1 (inside windows up)

Take off 2 (outside)

Random city driving 1 (manual mode)

Random city driving 2 (manual mode)

City Driving 3 (in D)

City Driving 4 (in D)

Highway Cruise in 65, 70, 75, and N (in D)

Dyno

Pictures

same section OEM vs mine

side by side

nope, we don't mess around! custom flanges for this setup so the reducer goes into a perfect fit! and WAY beefier than your generic flanges from muffler shops... US grade 304 SS of course!

installed pics!

*All equipment sold under the presumption that the purchaser will use it in accordance with applicable federal and any state laws in a manner that is safe and shall discontinue its use as conditions warrant. Equipment shall never be installed or used in a manner where it may interfere with safety or safety equipment. Do not install parts in the path of the airbag system or that hinder the function of seat belts! Veloximo products can be broken when excessive force is applied, or disassembled, and components can become loose from vibration or heat.

redlinedbimmer · 01-01-2012, 10:10 PM

so what do you get for $599? What do you get for $749? Could you pm me shipping quotes for both to 60564? Do you have to pay tax only if you're a CA resident?

DetailAddict · 01-02-2012, 11:47 AM

$599 and $749 you get the same thing. Just that the first week is the SUPER special deal.

And you get this: (flanges to right before the muffler, and the vband clamp of course)

Leo

Quote:

Originally Posted by redlinedbimmer

so what do you get for $599? What do you get for $749? Could you pm me shipping quotes for both to 60564? Do you have to pay tax only if you're a CA resident?

adamsclubs · 01-02-2012, 09:13 PM

What about the muffler and tips? What is your installation cost?

DetailAddict · 01-02-2012, 11:51 PM

not included in this set but we can help you with that if you want. since the development, a lot of folks have been asking if we can mate it with PE, different magnaflow, or some other brands of muffers/tips, and even quads. That's why we ended up offering this instead so folks can do whatever they want with it. Shoot me a PM and let me know what you have in mind.

Leo

Quote:

Originally Posted by adamsclubs

What about the muffler and tips? What is your installation cost?

DetailAddict · 01-03-2012, 12:00 PM

all PMs replied!

5 more days before price goes up!

mapleridge · 01-03-2012, 09:07 PM

Payment sent. I've been looking forward to this set up for a while. This is an excellent price too.

DetailAddict · 01-04-2012, 01:06 PM

got it! please check your email for the latest recommendation on your setup.

Leo

Quote:

Originally Posted by mapleridge

Payment sent. I've been looking forward to this set up for a while. This is an excellent price too.

DetailAddict · 01-05-2012, 01:04 PM

remember price goes up by $150 starting 1/8!!!

mapleridge · 01-06-2012, 10:59 PM

2 more days guys. $599 for cat delete, resonator delete, pure bolt on and proven gains. Those with a PE I would love to hear this on your set up.

325xi-06 · 01-07-2012, 02:45 AM

this looks very nice...

DetailAddict · 01-07-2012, 01:08 PM

thanks for the bump!

Quote:

Originally Posted by mapleridge

2 more days guys. $599 for cat delete, resonator delete, pure bolt on and proven gains. Those with a PE I would love to hear this on your set up.

price goes up tomorrow!!

Quote:

Originally Posted by 325xi-06

this looks very nice...

DetailAddict · 01-09-2012, 07:41 PM

now $749!

PM me for shipping cost!

Shazmonkee · 01-17-2012, 04:03 PM

looks so good. bad timing T_T

Route 16 · 01-17-2012, 06:14 PM

Leo can I do in this in layaway? Haha I feel like selling my Eisenmann SR pipes now. Then next install for that Dynavin, I heard a new one came out too.

DetailAddict · 01-17-2012, 06:17 PM

hurry up with your tax return!

Quote:

Originally Posted by Shazmonkee

looks so good. bad timing T_T

DetailAddict · 01-17-2012, 06:18 PM

come in and take the prototype for a test drive!

Quote:

Originally Posted by yoko kai

Leo can I do in this in layaway? Haha I feel like selling my Eisenmann SR pipes now. Then next install for that Dynavin, I heard a new one came out too.

Route 16 · 01-18-2012, 02:25 AM

AHH wish I could this week, except you might not be open this Saturday maybe?

I'd like to do a side by side video with my Eisenmann and Detail Addict Exhaust! I would cut up my SR resonator pipe but I don't want to ruin an expensive part. I wish I just bought the $599 when it was offered.

Thread Jack! Who wants my pipes?!

Quote:

Originally Posted by DetailAddict

come in and take the prototype for a test drive!

DetailAddict · 01-18-2012, 02:50 AM

ping me again on Fri to see if I'll be in...

however, my test car is not in the bay area anymore... so we would have to install it on yours instead...

Leo

Quote:

Originally Posted by yoko kai

AHH wish I could this week, except you might not be open this Saturday maybe?

I'd like to do a side by side video with my Eisenmann and Detail Addict Exhaust! I would cut up my SR resonator pipe but I don't want to ruin an expensive part. I wish I just bought the $599 when it was offered.

Thread Jack! Who wants my pipes?!

Route 16 · 01-18-2012, 02:56 AM

It's no problem, I'd really rather see it in person.

Quote:

Originally Posted by DetailAddict

ping me again on Fri to see if I'll be in...

however, my test car is not in the bay area anymore... so we would have to install it on yours instead...

Leo

DetailAddict · 01-18-2012, 04:02 AM

the system is here and availble, just not on a car right now.

Leo

Quote:

Originally Posted by yoko kai

It's no problem, I'd really rather see it in person.

Route 16 · 01-18-2012, 04:12 AM

I mean hear in person, sorry.

Quote:

Originally Posted by DetailAddict

the system is here and availble, just not on a car right now.

Leo

01-01-2012, 08:00 AM	#1
DetailAddict Captain 42 Rep 976 Posts Drives: 2008 BMW 328i Join Date: Jan 2008 Location: Santa Clara, CA iTrader: (10)	New Year Special - Customizable Primary Catback System! Alright folks! After months of development and testing. This setup is finally ready to go! If you are looking for a direct bolt-on system to remove the secondary cats as well as resonator, this is the way to go. It allows you to mate with any muffler so you can have the flow and the sound and tips of your choice. Talk about performance and uniqueness! If you are local and want us to mount your muffler and tips, PM me for more info! - Direct bolt-on to stock header/primary cats - Mandrel bends on all tubing - Stainless steel construction throughout - Magnaflow 2.5" dual inlet/ 3.0" single outlet Y-Pipe - Stainless steel vband for easy install and adjustment - Tig weld and back purged. - Dyno proven setup - Made in USA! PM me with your zipcode for shipping! Retail $960 SUPER LOW INTRO RATE!!! Starting 01/08/12 - $749 + Tax and Shipping Deal ends when supply runs out or Jan 31, 2012, which ever comes first. Paypal us at sales@detailaddict.com to secure yours and we can figure out the tax and shipping after. dbA Measurement OEM dbA Measurement with 2 mufflers dbA Measurement with 1 muffler only Sound Clips as promised! (all recorded with iPhone. quickest way I can get them online) Drive by 1 Drive by 2 Take off 1 (inside windows up) Take off 2 (outside) Random city driving 1 (manual mode) Random city driving 2 (manual mode) City Driving 3 (in D) City Driving 4 (in D) Highway Cruise in 65, 70, 75, and N (in D) Dyno Pictures same section OEM vs mine side by side nope, we don't mess around! custom flanges for this setup so the reducer goes into a perfect fit! and WAY beefier than your generic flanges from muffler shops... US grade 304 SS of course! installed pics! All equipment sold under the presumption that the purchaser will use it in accordance with applicable federal and any state laws in a manner that is safe and shall discontinue its use as conditions warrant. Equipment shall never be installed or used in a manner where it may interfere with safety or safety equipment. Do not install parts in the path of the airbag system or that hinder the function of seat belts! Veloximo products can be broken when excessive force is applied, or disassembled, and components can become loose from vibration or heat. Last edited by DetailAddict; 02-13-2012 at 04:02 PM..*
	Appreciate 0 Tweet

01-01-2012, 10:10 PM	#2
redlinedbimmer Private First Class 10 Rep 191 Posts Drives: 2008 328i 6 speed Join Date: May 2011 Location: Chicago iTrader: (0)	so what do you get for $599? What do you get for $749? Could you pm me shipping quotes for both to 60564? Do you have to pay tax only if you're a CA resident?
	Appreciate 0

01-02-2012, 09:13 PM	#4
adamsclubs Second Lieutenant 5 Rep 223 Posts Drives: 2011 328i sedan Join Date: Sep 2011 Location: CA iTrader: (0)	What about the muffler and tips? What is your installation cost?
	Appreciate 0

01-03-2012, 12:00 PM	#6
DetailAddict Captain 42 Rep 976 Posts Drives: 2008 BMW 328i Join Date: Jan 2008 Location: Santa Clara, CA iTrader: (10)	all PMs replied! 5 more days before price goes up!
	Appreciate 0

01-03-2012, 09:07 PM	#7
mapleridge Banned 158 Rep 2,638 Posts Drives: E90 N52 AT Join Date: Apr 2011 Location: Vancouver, BC iTrader: (4)	Payment sent. I've been looking forward to this set up for a while. This is an excellent price too.
	Appreciate 0

01-05-2012, 01:04 PM	#9
DetailAddict Captain 42 Rep 976 Posts Drives: 2008 BMW 328i Join Date: Jan 2008 Location: Santa Clara, CA iTrader: (10)	remember price goes up by $150 starting 1/8!!!
	Appreciate 0

01-06-2012, 10:59 PM	#10
mapleridge Banned 158 Rep 2,638 Posts Drives: E90 N52 AT Join Date: Apr 2011 Location: Vancouver, BC iTrader: (4)	2 more days guys. $599 for cat delete, resonator delete, pure bolt on and proven gains. Those with a PE I would love to hear this on your set up.
	Appreciate 0

01-07-2012, 02:45 AM	#11
325xi-06 manifold conversion 325/330 5 Rep 99 Posts Drives: 325xi 06 Join Date: Nov 2009 Location: Faroe islands iTrader: (0)	this looks very nice...
	Appreciate 0

01-09-2012, 07:41 PM	#13
DetailAddict Captain 42 Rep 976 Posts Drives: 2008 BMW 328i Join Date: Jan 2008 Location: Santa Clara, CA iTrader: (10)	now $749! PM me for shipping cost!
	Appreciate 0

01-17-2012, 04:03 PM	#14
Shazmonkee 116 Rep 2,455 Posts Drives: BMW E92 Join Date: Feb 2007 Location: United States iTrader: (11) Garage List 2007 BMW 328i E92 C ... [0.00]	looks so good. bad timing T_T
	Appreciate 0

01-17-2012, 06:14 PM	#15
Route 16 I got lei'd 873 Rep 7,615 Posts Drives: '10 E90 M3 Join Date: Sep 2011 Location: Dark Side of the Moon iTrader: (62)	Leo can I do in this in layaway? Haha I feel like selling my Eisenmann SR pipes now. Then next install for that Dynavin, I heard a new one came out too.
	Appreciate 0