[Sneeze]

Hey guys,

Which bbk fit to this specs? Thanks!

[turugara]

You can print off the templates for BBK's online

example, here's stoptech's.

http://www.stoptech.com/technical-su...ment-templates

[kevin@bavarianx]

I don't think there is a option for a BBK that will clear a 17" wheel for the E9x as the fronts start at 355mm which requires a 18" minimum wheel to clear.

[mid-corner fun]

that's what I thought so too but there's a specific post on a tuner's forum about a particular BBK that clears 17x9 fronts.

[HP Autosport]

Originally Posted by thr33fivei

Hey guys,

Which bbk fit to this specs? Thanks!

Not sure if there is a BBK out there that will fit within the 17"

How about RB two-piece rotor with a performance pad combo?

[mid-corner fun]

this is from another forum: "17x9 Apex arc-8 will clear a stoptech 6 piston 355mm from bbk"

I have no way to confirm this, just reporting. (from = front)

[HP Autosport]

Originally Posted by PeterM1

this is from another forum: "17x9 Apex arc-8 will clear a stoptech 6 piston 355mm from bbk"

I have no way to confirm this, just reporting. (from = front)

We tried this last time and the ARC8 17"'s didn't clear so my customer had to order some 18"'s.

[mid-corner fun]

Originally Posted by HP Autowerks

We tried this last time and the ARC8 17"'s didn't clear so my customer had to order some 18"'s.

and yet here's another post, today, of a successful 17"/stoptech combo

http://www.e90post.com/forums/showpo...7&postcount=59

[HP Autosport]

Originally Posted by PeterM1

and yet here's another post, today, of a successful 17"/stoptech combo

http://www.e90post.com/forums/showpo...7&postcount=59

Try it and find out.

[jbass524]

Originally Posted by PeterM1
and yet here's another post, today, of a successful 17"/stoptech combo

http://www.e90post.com/forums/showpo...7&postcount=59

Originally Posted by HP Autowerks

Try it and find out.

I used this combination for a while then used it again in late November. No issues at all, ever:

• Wheels: 17 X 9 APEX ARC 8, ET 42 - ft and rear
• Brakes: Stoptech ST60 355 X 20 - ft. Rear doesn't matter as it's a smaller rotor.

I even bought them from Harold. Are my front rotors not 355 Harold?

[HP Autosport]

Originally Posted by jbass524

Originally Posted by PeterM1
and yet here's another post, today, of a successful 17"/stoptech combo

http://www.e90post.com/forums/showpo...7&postcount=59



I used this combination for a while then used it again in late November. No issues at all, ever:

• Wheels: 17 X 9 APEX ARC 8, ET 42 - ft and rear
• Brakes: Stoptech ST60 355 X 20 - ft. Rear doesn't matter as it's a smaller rotor.

I even bought them from Harold. Are my front rotors not 355 Harold?

Maybe it was a Brembo or AP kit we did. We install many BBK's it's hard to recall what wheels went with it.

If "Jbass524" has confirmed fitment, there shouldn't be any issues.

[Fred_Boosted]

Originally Posted by kevin@bavarianx

I don't think there is a option for a BBK that will clear a 17" wheel for the E9x as the fronts start at 355mm which requires a 18" minimum wheel to clear.

+1

And most 18" won't clear... lol

Most people ended up with spacer or larger wheels

[HP Autosport]

Originally Posted by Fred_Boosted

+1

And most 18" won't clear... lol

Most people ended up with spacer or larger wheels

"Jbass524" above just confirmed fitment.