[B_davis]

Snow performance provides flow rates for their nozzles but I believe those are measured at @40psi. I have the high output pump included in the stage 3kit, certainly at 100% DC I am seeing more than 40psi?

[enrita]

http://www.e90post.com/forums/showth...formance+stage

[B_davis]

If thats the case my correction factor would be 1.85. I've been running the 625ml/min and the 375ml/min on Stage 1 cobb. That means I've been spraying 1000ml/min * 1.85 = 1875ml/min .... how is that freaking possible ...

[enrita]

Originally Posted by B_davis

If thats the case my correction factor would be 1.85. I've been running the 625ml/min and the 375ml/min on Stage 1 cobb. That means I've been spraying 1000ml/min * 1.85 = 1875ml/min .... how is that freaking possible ...

thats way way to much meth... i was running those 2 with procede at 20 psi boost on upped turbos.....
your trims must be pegged full negative, you never missfired with so much meth? just run the 375 ml nozzle with stage 1 cobb. Actually i would only go for the 175 or 225 ml nozzle. You just need the octane and cooling with cobb, not fueling , also run 50/50 mix if you can.

The 375 should flow about 650 ml/min. I run now the 375 main and 225 power nozzle supporting over 450 whp so no need for you to run so much meth.