[E92TTKING]

Hi will the 7" ETS FMIC fit with the m3 style bumper on e92?
Anyone have this?
Help Please

[EDM92]

I don't have any experience with aftermarket intercoolers, but from my understanding, the fitment issue comes in to play because of the shrouding on the car itself, not the bumper. You will most likely have to dremel off part of that shrouding to make it fit, regardless of what bumper you have.

[E92TTKING]

Originally Posted by BMWorNOTHING

I don't have any experience with aftermarket intercoolers, but from my understanding, the fitment issue comes in to play because of the shrouding on the car itself, not the bumper. You will most likely have to dremel off part of that shrouding to make it fit, regardless of what bumper you have.

Yea cutting shroud is no problem it's just maybe the bumper has a different fitment

[werke-t]

Originally Posted by E92TTKING

Yea cutting shroud is no problem it's just maybe the bumper has a different fitment

you should be good, just going to have to cut A LOT of shroud

[Mr_PharmD]

it will sit flush with your plastic air scoops. U will have to cut off the bottom middle shroud completely and trim the passenger side near the radiator portion to fit the 7". The hardest part was getting the chargepipe to fit ontop of the oem intake piece.

[sdstatestud88]

Yes the ETS 7" will fit fine with the m3 bumper...Ran it on my e92 no problems at all..Just the typical shroud cutting

[E92TTKING]

Awesome thanks so much guys

[805beemer]

what about on an e90? I already have the 7" ets installed, would I have to cut any more of the shroud away to fit the m3 bumper?

[ETS Michael]

Thanks for the info guys.

[Brey335i]

Yes it fits