[mr.e90]

i just bought a new frm3 and now i need to install it. can you guys please help me?? how do i install this?? thanks!!

[NiVeDh]

This is where it is:

[Elliott@DetailAddict]

I want your pedals

[NiVeDh]

Originally Posted by Grant@DetailAddict

I want your pedals

Not my picture.

I went with the M-Sport dead pedal + OEM stainless steel pedal pads for ease of installation and more grip than the all-metal pedals.

[mr.e90]

does it have to get coded to work well

[DESI4life10]

Originally Posted by mr.e90

does it have to get coded to work well

yes programmed and coding

[mr.e90]

How do I program it? Sorry im a noob on coding

[Dziqsek_]

Enter your vin with winkfp then program with blank MAN file usng ncs and thats all

[DESI4life10]

Originally Posted by *******_

Enter your vin with winkfp then program with blank MAN file usng ncs and thats all

....using expertmode is the proper way of reverting to default.

[Dziqsek_]

Both ways do the same things so I recommend to use it how you want, there is no difference at final target

[Elliott@DetailAddict]

Couldn't be more wrong actually. I've personally seen the blank .man method fail to return every line to defaults.

Please don't spread mis-information.

Cheers

[DESI4life10]

+1 to grant.
:-)

[BMW-335i-07]

so what is right way?
maybe someone can make DIY and Sticky?

[Dziqsek_]

Originally Posted by Grant@DetailAddict

Couldn't be more wrong actually. I've personally seen the blank .man method fail to return every line to defaults.

Please don't spread mis-information.

Cheers

So you must have something wrong with your profile, i do it quite often and 100% back to stock.

[Elliott@DetailAddict]

do it however you'd like.

[JimVR4]

I used the MAN method a few times sucessfully and then found out it is not the recommended way. Then I used expertmode to code NFRM to defaults and I believe it also set CAS to defaults because I ended up having to recode both of them. IDK, maybe I did it wrong

[BMW-335i-07]

Originally Posted by Grant@DetailAddict

Couldn't be more wrong actually. I've personally seen the blank .man method fail to return every line to defaults.

Please don't spread mis-information.

Cheers

So this is right way?

1. Open NCSEXPERT
2. File > Load profile > Select Expertmode > Click OK
3. Press F1 (VIN/ZCS/FA)
4. Press F3 (CS/FA f. EC) > Select E89 > Click OK > Select CAS > Click OK
5. Press F6 (Back)
6. Press F3 (Process Car)
7. Press F1 (Code Car)

[Dziqsek_]

not quite.

1-5 are ok
6.Change job to SG_Codiren
7.Execute job

do it only in expertmode cause in other profiles ( like revtors) it process your car with .man file

[marius0703]

Originally Posted by *******_

not quite.

1-5 are ok
6.Change job to SG_Codiren
7.Execute job

do it only in expertmode cause in other profiles ( like revtors) it process your car with .man file

So if using a new (used) module is WinKFP zbus flashing vin to module still needed or does this do it... i tried this method and my footwell is still not working properly. so that means i need to do it in winkfp right ?

[Sensible_]

Wow, old thread back to life!!!!

Just program it (flash it) with winkfp with your own vin then Using NCSexpert CODE it to default using expertmode. There are soooo many guides online showing how to do this.

[joepc]

do never execute with a blank .man

do it the proper way..

load expertmode
f1
f3
e89
cas
press back
chose frm/nfrm
then execute..

[marius0703]

Originally Posted by joepc

do never execute with a blank .man

do it the proper way..

load expertmode
f1
f3
e89
cas
press back
chose frm/nfrm
then execute..

I can execute the "FA_WRITE" job but the old vin is still attached and i tried doing FGNF_SCHRIBEN (something like that) and that gives me an error saying "Error in CABD! Look at CABI.ERR and ERROR.LOG COAPI-2000 EDIABAS or SGBD error BIP-0009: BEST VERSION ERROR"