[325iii]

I don't want to really spend grands on exhaust, just some cheap pipe work and a new muffler. How would you guys go about at this? I have a m-tech rear so I can just cut the diffuse.

[TroyDeJ]

many options, use the search feature and youll find a lot of setups

[325iii]

Originally Posted by TroyDeJ

many options, use the search feature and youll find a lot of setups

I decided to go dual outlet muffler -> dual tips. Thanks. And I like your setup, it's the same as mine except the rims lol, just ordered blacklines.

[TroyDeJ]

nice, blacklines are a huge difference. go with a magnaflow muffler. i have one and once it breaks in it sounds great

[325iii]

Also don't the 325i and 328i have smaller pipe room on the passenger side? Would I need shorter single tips?

[Simon.bmw]

Originally Posted by 325iii

I don't want to really spend grands on exhaust, just some cheap pipe work and a new muffler. How would you guys go about at this? I have a m-tech rear so I can just cut the diffuse.

whats ur options on doing the dual 335i set up?we r on the same boat.but I havent decide which way to go with. Do we really need a 335bumper to do this?

[gustnyc]

I bought the wrong quad diffuser for my 335.. It's used but in 8/10 condition and in carbon fiber.. I'm selling it for $125 plus shipping.. Let me know

[eNinety650]

shoot me a PM ^

i might be interested. you got any pics?

[325iii]

Originally Posted by Simon.bmw

whats ur options on doing the dual 335i set up?we r on the same boat.but I havent decide which way to go with. Do we really need a 335bumper to do this?

Well I have m-tech, but i'm trying to do the wider quad setup which is difficult. I found a shop willing to do it. The reason is the 3d design quad diffuser reps have wide quad setup. if you want 335i setup, it's your best bet to go m-tech before so you can change diffuser to what you want unless you want to get a 335i bumper.

[Simon.bmw]

Originally Posted by 325iii

Well I have m-tech, but i'm trying to do the wider quad setup which is difficult. I found a shop willing to do it. The reason is the 3d design quad diffuser reps have wide quad setup. if you want 335i setup, it's your best bet to go m-tech before so you can change diffuser to what you want unless you want to get a 335i bumper.

hmm..where did u get ur m-tech bumper??
how much did u pay??

[325iii]

Originally Posted by Simon.bmw

hmm..where did u get ur m-tech bumper??
how much did u pay??

I bought mine from jgmods since they painted it before shipping. I bought mine for around 900 with shipping included I believe, and that was freight shipped so it doesn't damage my bumper.

[Simon.bmw]

Originally Posted by 325iii

I bought mine from jgmods since they painted it before shipping. I bought mine for around 900 with shipping included I believe, and that was freight shipped so it doesn't damage my bumper.

Wow. that's a lot lot lot lot lot money.!! Since i have a single dual oem bumper. lol..

[325iii]

Originally Posted by Simon.bmw

Wow. that's a lot lot lot lot lot money.!! Since i have a single dual oem bumper. lol..

you can always get a scratched up 335i bumper and get it repainted. Just make sure all the tabs are there. those bumpers usually run about 100 dollars to 250 depending on condition, just get ones that are scratched up so the shop only has to sand it down and paint it. I would keep the original bumper though if you want to sell the car later.

[Simon.bmw]

Originally Posted by 325iii

you can always get a scratched up 335i bumper and get it repainted. Just make sure all the tabs are there. those bumpers usually run about 100 dollars to 250 depending on condition, just get ones that are scratched up so the shop only has to sand it down and paint it. I would keep the original bumper though if you want to sell the car later.

right on,.. im looking for a used mtech or 335i bumper... lol.
but why can't we cut the oem bumper to fit the right side??.

[325iii]

Originally Posted by Simon.bmw

right on,.. im looking for a used mtech or 335i bumper... lol.
but why can't we cut the oem bumper to fit the right side??.

You can, if you want to run the setup I am doing. Just go to the right muffler guy and a good shop that does lot of mods so they cut your bumper correctly in parallel form. if you want to use your current bumper, that means you either go dual oval or quad setup.

And I'll take a picture why 335i setup is easier, there's little bit more rooms for it. M3 rep setup is even easier, crap load of room.

[Simon.bmw]

Originally Posted by 325iii

You can, if you want to run the setup I am doing. Just go to the right muffler guy and a good shop that does lot of mods so they cut your bumper correctly in parallel form. if you want to use your current bumper, that means you either go dual oval or quad setup.

And I'll take a picture why 335i setup is easier, there's little bit more rooms for it. M3 rep setup is even easier, crap load of room.

like the pic shows in this post?. http://www.e90post.com/forums/showthread.php?t=399334

cut the right side to fit a quad set up? right??

[325iii]

Originally Posted by Simon.bmw

like the pic shows in this post?. http://www.e90post.com/forums/showthread.php?t=399334

cut the right side to fit a quad set up? right??

yeah, and you can fit a quad setup or just do your own setup. I chose the cheap path ahaha

[Simon.bmw]

Originally Posted by 325iii

yeah, and you can fit a quad setup or just do your own setup. I chose the cheap path ahaha

i love the dual set up with mtech bumper sooooooooooo much.. cant find any cheap mtech bumper tho, i will keep hunting. lol.

[325iii]

I'm doing this exact setup

[gustnyc]

I have that same set up for my 335 I have a mtech diffuser on sale in the picture gallery. Thread is under quad problems

[325iii]

Originally Posted by gustnyc

I have that same set up for my 335 I have a mtech diffuser on sale in the picture gallery. Thread is under quad problems

I'll take it next week if you want to shop it to cali. I'm getting my exhaust done on monday

[BoogeyMan'sBMW]

vid please!