Removing Lettering on plastic radar display 9500ci

B-737 · 08-15-2012, 10:43 AM

question for the detail experts...

what is a good product to use to remove the write lettering on the 9500ci display unit without damaging its finish or lens?

I asked because i used goof off to remove the "passport radar" lettering from my former Qi45 unit and totally ruined the plastic display.

jiaan13 · 08-15-2012, 03:09 PM

Very, very carefully with a brand new razorblade. Or, you could wetsand it with very fine grit sandpaper, and use a buffer/polish to take the marks out.

Detailed Image · 08-20-2012, 11:02 PM

If you are referring to it being on the plastic screen protecting the gauges as seen here (http://shorecellular.net/gallery/pho...ellular-1.html), here is what I'd suggest. A little bit of heat from a blow dryer can help loosen the adhesives, however be careful you don't melt or burn any part of the interior. You can then use a plastic razor blade or some floss and carefully try to remove it from the surface. A thin flimsy plastic credit card can also work. Go slow and don't use too much power, try finesse the best you can. If you have minimal residue left over the Meguiar's PlastX Clear Plastic Cleaner and Polish should finish cleaning up the rest of it. If you have a lot left over you could try to use a clay bar on it instead of a product like goof off or the 3M Adhesive Remover. Let me know if you have any other questions and I'll be happy to help.

Greg @ DI

08-15-2012, 10:43 AM	#1
B-737 Captain 50 Rep 825 Posts Drives: a car. Join Date: Sep 2010 Location: Jersey Shore iTrader: (6) Garage List 2011 328 xi [7.26]	Removing Lettering on plastic radar display 9500ci question for the detail experts... what is a good product to use to remove the write lettering on the 9500ci display unit without damaging its finish or lens? I asked because i used goof off to remove the "passport radar" lettering from my former Qi45 unit and totally ruined the plastic display. __________________
	Appreciate 0 Tweet Quote

08-15-2012, 03:09 PM	#2
jiaan13 uʍop ǝpısdn 0 Rep 63 Posts Drives: '11 335d, SG/Saddle, ZSP, ZPP Join Date: Nov 2011 Location: South bay area, NorCal iTrader: (0)	Very, very carefully with a brand new razorblade. Or, you could wetsand it with very fine grit sandpaper, and use a buffer/polish to take the marks out.
	Appreciate 0 Quote

08-20-2012, 11:02 PM	#3
Detailed Image 370 Rep 5,052 Posts Drives: Detailed by Detailed Image Join Date: Apr 2007 Location: Albany, NY iTrader: (5)	If you are referring to it being on the plastic screen protecting the gauges as seen here (http://shorecellular.net/gallery/pho...ellular-1.html), here is what I'd suggest. A little bit of heat from a blow dryer can help loosen the adhesives, however be careful you don't melt or burn any part of the interior. You can then use a plastic razor blade or some floss and carefully try to remove it from the surface. A thin flimsy plastic credit card can also work. Go slow and don't use too much power, try finesse the best you can. If you have minimal residue left over the Meguiar's PlastX Clear Plastic Cleaner and Polish should finish cleaning up the rest of it. If you have a lot left over you could try to use a clay bar on it instead of a product like goof off or the 3M Adhesive Remover. Let me know if you have any other questions and I'll be happy to help. Greg @ DI
	Appreciate 0 Quote