[Lux3m35i]

Hey guys,

I didn't use my procede for a while because of holidays etc. This week I drove on the german Autobahn I recognized that I only reach 10psi instead of 15-16.

On full throttle at >8psi I do have a windy noise coming from the front window. Sounds like you would pull up the air conditioning for the front window. (I don't know if this noise is in relation with the boost leak)

I'm running procede stg1 5-23agg map with a Helix Intercooler which I had installed few weeks ago. But the boost looked fine after FMIC install.

I did some pulls but I forgot to set the Boost set point.



Here's a log from last month:



I think I have to do a new log. Which channels should I set for a diagnose?

[Jeff@TopGearSolutions]

I would check your connections on intercooler, first. Brand new parts tend to move after a few miles and need to be re tightened

[MrRager]

holidays?

[mithiral67]

Originally Posted by MrRager

holidays?

That means vacation in the usa.

[E3r2E9r]

Originally Posted by Jeff@topgearsolutions

I would check your connections on intercooler, first. Brand new parts tend to move after a few miles and need to be re tightened

+1

[Lux3m35i]

Originally Posted by Jeff@topgearsolutions

I would check your connections on intercooler, first. Brand new parts tend to move after a few miles and need to be re tightened

So true. Found a loose hose clamp, I hope this will fix the issue.

Did anyone recognized that wastegate rattling is getting worse while using procede or an other tune? I got a gentle wastegate rattle in stock mode while driving with no throttle.

[Lux3m35i]

I fixed the clamp. How does it look?



Are these bosst peaks while shifting normal?

[jpsimon]

yes that is perfectly normal