Where to put Betalink?

Impele · 08-01-2007, 10:12 PM

Before anyone says anything, I did a search and did not find anything on this. I just received my Aero Lip today and I wanted to know if there was anywhere in particular I should put the Betalink? I'm new to modding cars so any advice would be great. Thanks

jimlai322 · 08-01-2007, 11:41 PM

I used 3M double sided tape on mine just in case I want to take it off in the future.

D-Rock · 08-02-2007, 01:23 AM

Quote:

Originally Posted by jimlai322

I used 3M double sided tape on mine just in case I want to take it off in the future.

+1 really the best way to go. You can even use the 3m tape it came with. Its really more than enough.

Impele · 08-02-2007, 02:57 PM

I've decided to use betalink though because I want it to be on there permanently. When you put the 3m on, where on the lip did you put the tape? On all of the edges?

D-Rock · 08-02-2007, 03:07 PM

I just used the tape it came with.

Bimmer335i07 · 08-02-2007, 03:34 PM

Just put the Betalink or 3M on the surface that will connect from the aero lip to the bumper. Basically any flat surface that will connect to the bumper.

GL!

OC Guy · 08-02-2007, 05:36 PM

Quote:

Originally Posted by Impele

I've decided to use betalink though because I want it to be on there permanently. When you put the 3m on, where on the lip did you put the tape? On all of the edges?

I avoided the very edges of part of the aerolip so it would fit more flush. I recommend that you put the double sided tape on but leave on the protective tape. From there, press it up against your bumper and see where you have to trim to make it more flush. The tape does not have to be right to the edge for it to fit right from what I could tell.

GL.

08-01-2007, 10:12 PM	#1
Impele Private 1 Rep 95 Posts Drives: 328i Coupe Join Date: May 2007 Location: Blue Bell, PA iTrader: (0)	Where to put Betalink? Before anyone says anything, I did a search and did not find anything on this. I just received my Aero Lip today and I wanted to know if there was anywhere in particular I should put the Betalink? I'm new to modding cars so any advice would be great. Thanks __________________
	Appreciate 0 Tweet Quote

08-01-2007, 11:41 PM	#2
jimlai322 Captain 39 Rep 853 Posts Drives: E60 535i & E90 325i Join Date: Jun 2005 Location: Los Angeles iTrader: (4)	I used 3M double sided tape on mine just in case I want to take it off in the future. __________________ 2008 SG E60 535i 2006 AW E90 325i
	Appreciate 0 Quote

08-02-2007, 02:57 PM	#4
Impele Private 1 Rep 95 Posts Drives: 328i Coupe Join Date: May 2007 Location: Blue Bell, PA iTrader: (0)	I've decided to use betalink though because I want it to be on there permanently. When you put the 3m on, where on the lip did you put the tape? On all of the edges? __________________
	Appreciate 0 Quote

08-02-2007, 03:07 PM	#5
D-Rock Lieutenant Colonel 200 Rep 1,855 Posts Drives: 325i Join Date: Jul 2005 Location: miami iTrader: (2)	I just used the tape it came with. __________________
	Appreciate 0 Quote

08-02-2007, 03:34 PM	#6
Bimmer335i07 BK Employee of the month! / Moderator 661 Rep 15,795 Posts Drives: BMW 335i Sedan Join Date: Apr 2007 Location: ... iTrader: (9) Garage List 2007 335i [0.00]	Just put the Betalink or 3M on the surface that will connect from the aero lip to the bumper. Basically any flat surface that will connect to the bumper. GL! __________________ Sponsored by: Pics of the ---> Barbera Beast <--- Martino Auto Concepts (Like them on Facebook MAC) Factory Trained & Authorized by BMW of North America Matt@Camber-Toe (Like them on Facebook Camber-Toe) LuxAngelEyes (Like them on Facebook LuxAngelEyes) LTBMW (Like them on Facebook LTBMW) OEMconcepts (Like them on Facebook OEMconcepts)
	Appreciate 0 Quote