Ultimate Racing Downpipes

psu139 · 08-15-2007, 09:36 AM

Fedex just arrived and brought me a new set of the ultimate racing downpipes. My wife took my camera to work so it will be a little while before I post some pics. They look just like the website photos. The welds look very clean. Oh I guess i should tell you that I got the high flow cats. V2 and my meisterschaft cant get here soon enough. Only negative is that it didn't come with install instructions.

Thanks Again UR

sflgator · 08-15-2007, 09:42 AM

Congrats! Just take them to a local shop to have them installed; I'm sure they'll be able to figure it out. PROcede v2.0 + the UR downpipes should make your car an unreal MONSTER!!!!

btw -- I hope you have stickier, wider non-RFTs; if not, then that should be your next mod since you need them!

psu139 · 08-15-2007, 09:47 AM

I have access to a lift and have done similar exhaust stuff. I really want to do it myself in case i need to remove them for any reason. I am curious to know how much it would cost to get installed. It might be worth having someone do.

sflgator · 08-15-2007, 09:58 AM

Quote:

Originally Posted by psu139

I have access to a lift and have done similar exhaust stuff. I really want to do it myself in case i need to remove them for any reason. I am curious to know how much it would cost to get installed. It might be worth having someone do.

I wouldn't do it, but obviously it depends on how comfortable you are with this kind of mod; I believe the guy from either UR or RR said that it would take the average person ~ 3 hours to install (which would suck in the S. FL heat

), so a service technician should be able to do it in less time without really mucking it up. If I were you, I'd pay someone to install and watch their every move (if you want to know how to uninstall/install)...but that's just me.

danielg · 08-15-2007, 10:33 AM

shouldnt be too hard.

Congrats on the purchase. please write a review when you're done.

psu139 · 08-15-2007, 10:40 AM

will do. If I do infact do the install I'll get some pictures so that you guys have an idea what your looking at if you plan on doing it.

335iheLLraiseR · 08-15-2007, 12:44 PM

if you get a chance, can you do a before and after Dyno?

down4it · 08-15-2007, 01:38 PM

Quote:

Originally Posted by psu139

will do. If I do infact do the install I'll get some pictures so that you guys have an idea what your looking at if you plan on doing it.

Be careful when tightening the V Band clamp... I snapped one when installing mine...

psu139 · 08-15-2007, 03:27 PM

Quote:

Originally Posted by down4it

Be careful when tightening the V Band clamp... I snapped one when installing mine...

Sorry to hear that. Do you have a picture?

Serjames · 08-15-2007, 04:45 PM

This sounds like the combo I'm thinking of.

Can't wait to hear your experiences

SJ

psu139 · 08-15-2007, 06:22 PM

here are some more photos.

NYCGarbagePrince · 08-15-2007, 06:28 PM

Looks like you got the high flow ones. Let me know how they sound i have the catless ones and they are as you would expect LOUD!!! heh Good luck

psu139 · 08-15-2007, 06:29 PM

I will probably install them within the next week. I'll let you know how they sound.

MontegoNick · 08-15-2007, 09:10 PM

Sweet man! Yeah for sure post some dyno's before and after if you can:

NYCGarbagePrince - You have the catless ones I see. Does it have a good loud sound...meaning it sounds deep? or is it riecy??

NYCGarbagePrince · 08-15-2007, 09:16 PM

Loud and deep not ricey at all.. you get the ricey sound from mufflers or the Completely craptacular X pipe included with every 335.

de.abeja · 08-15-2007, 10:15 PM

Quote:

Originally Posted by NYCGarbagePrince

Completely craptacular X pipe included with every 335.

The "Completely Craptacular" model is an option, I believe zrp9...

lee71 · 08-16-2007, 07:56 PM

Quote:

Originally Posted by NYCGarbagePrince

Loud and deep not ricey at all.. you get the ricey sound from mufflers or the Completely craptacular X pipe included with every 335.

No faulty code readings with all of your mods? I've got the TT and was thinking about the UR downpipes as an add on...but I'm concerned it will throw bad codes...

NYCGarbagePrince · 08-16-2007, 07:59 PM

o2 sensor codes and inefficiency codes... Working out the bugs as we speak.. clear them change a part.. clear them change a map.. hopefully this new x-pipe is the solution i am looking for...

1clean335i · 08-16-2007, 08:58 PM

nice! Hope to see you at the cookout next weekend!

335iheLLraiseR · 08-16-2007, 09:40 PM

Quote:

Originally Posted by NYCGarbagePrince

o2 sensor codes and inefficiency codes... Working out the bugs as we speak.. clear them change a part.. clear them change a map.. hopefully this new x-pipe is the solution i am looking for...

please elaborate on that....

and what new X-pipe?

Evo8MRto335I · 08-17-2007, 12:05 AM

I received my cat downpipes today and I can say they are light as hell. The cats are tiny, I thought that both downpipes would be heavy but they are extremelly light in weight.

I haven't put them in yet but I am planning on perhaps this weekend. I would let you guys know how the installation goes (if I do it).

LACA335i · 08-17-2007, 01:03 AM

Quote:

Originally Posted by psu139

Fedex just arrived and brought me a new set of the ultimate racing downpipes. My wife took my camera to work so it will be a little while before I post some pics. They look just like the website photos. The welds look very clean. Oh I guess i should tell you that I got the high flow cats. V2 and my meisterschaft cant get here soon enough. Only negative is that it didn't come with install instructions.

Thanks Again UR

how much again dp? NO OS2 sensor... Man oh man.. u going to have CEL

08-15-2007, 09:36 AM	#1
psu139 First Lieutenant 25 Rep 340 Posts Drives: F10 M5 Join Date: Apr 2007 Location: Glenwood, MD iTrader: (1)	Ultimate Racing Downpipes Fedex just arrived and brought me a new set of the ultimate racing downpipes. My wife took my camera to work so it will be a little while before I post some pics. They look just like the website photos. The welds look very clean. Oh I guess i should tell you that I got the high flow cats. V2 and my meisterschaft cant get here soon enough. Only negative is that it didn't come with install instructions. Thanks Again UR Attached Images Last edited by psu139; 08-15-2007 at 06:06 PM..
	Appreciate 0 Tweet Quote

08-15-2007, 09:42 AM	#2
sflgator Major General 166 Rep 5,389 Posts Drives: '09 MB C63 AMG & '08 MB GL450 Join Date: Oct 2006 Location: U.S. iTrader: (1)	Congrats! Just take them to a local shop to have them installed; I'm sure they'll be able to figure it out. PROcede v2.0 + the UR downpipes should make your car an unreal MONSTER!!!! btw -- I hope you have stickier, wider non-RFTs; if not, then that should be your next mod since you need them! __________________ \|2009 RENNtech MB C63 AMG \| Black/Black Leather/Black Maple \| Premium II \| MultiMedia \| iPod \| \| TeleAid \| Charcoal Filter Delete \| BMC High-Flow Air Filters \| High-Flow Secondary Cats \| Clear Side Markers \|
	Appreciate 0 Quote

08-15-2007, 09:47 AM	#3
psu139 First Lieutenant 25 Rep 340 Posts Drives: F10 M5 Join Date: Apr 2007 Location: Glenwood, MD iTrader: (1)	I have access to a lift and have done similar exhaust stuff. I really want to do it myself in case i need to remove them for any reason. I am curious to know how much it would cost to get installed. It might be worth having someone do.
	Appreciate 0 Quote

08-15-2007, 10:33 AM	#5
danielg Lieutenant 27 Rep 528 Posts Drives: 07 335i sedan Join Date: May 2007 Location: Bay Area, CA iTrader: (0)	shouldnt be too hard. Congrats on the purchase. please write a review when you're done.
	Appreciate 0 Quote

08-15-2007, 10:40 AM	#6
psu139 First Lieutenant 25 Rep 340 Posts Drives: F10 M5 Join Date: Apr 2007 Location: Glenwood, MD iTrader: (1)	will do. If I do infact do the install I'll get some pictures so that you guys have an idea what your looking at if you plan on doing it.
	Appreciate 0 Quote

08-15-2007, 04:45 PM	#10
Serjames Colonel 131 Rep 2,426 Posts Drives: E93 335i M-sport Join Date: May 2007 Location: Surrey - UK iTrader: (0) Garage List 2007 E93 335i M Spo ... [0.00] 2003 Nissan Primera S [0.00]	This sounds like the combo I'm thinking of. Can't wait to hear your experiences SJ
	Appreciate 0 Quote

08-15-2007, 06:22 PM	#11
psu139 First Lieutenant 25 Rep 340 Posts Drives: F10 M5 Join Date: Apr 2007 Location: Glenwood, MD iTrader: (1)	here are some more photos. Attached Images
	Appreciate 0 Quote

08-15-2007, 06:28 PM	#12
NYCGarbagePrince Major 256 Rep 1,435 Posts Drives: X6 50i Join Date: Aug 2007 Location: NYC iTrader: (0)	Looks like you got the high flow ones. Let me know how they sound i have the catless ones and they are as you would expect LOUD!!! heh Good luck
	Appreciate 0 Quote

08-15-2007, 06:29 PM	#13
psu139 First Lieutenant 25 Rep 340 Posts Drives: F10 M5 Join Date: Apr 2007 Location: Glenwood, MD iTrader: (1)	I will probably install them within the next week. I'll let you know how they sound.
	Appreciate 0 Quote

08-15-2007, 09:10 PM	#14
MontegoNick New Member 0 Rep 15 Posts Drives: Montego Blue Join Date: May 2007 Location: LA iTrader: (0)	Sweet man! Yeah for sure post some dyno's before and after if you can: NYCGarbagePrince - You have the catless ones I see. Does it have a good loud sound...meaning it sounds deep? or is it riecy??
	Appreciate 0 Quote

08-15-2007, 09:16 PM	#15
NYCGarbagePrince Major 256 Rep 1,435 Posts Drives: X6 50i Join Date: Aug 2007 Location: NYC iTrader: (0)	Loud and deep not ricey at all.. you get the ricey sound from mufflers or the Completely craptacular X pipe included with every 335.
	Appreciate 0 Quote

08-16-2007, 07:59 PM	#18
NYCGarbagePrince Major 256 Rep 1,435 Posts Drives: X6 50i Join Date: Aug 2007 Location: NYC iTrader: (0)	o2 sensor codes and inefficiency codes... Working out the bugs as we speak.. clear them change a part.. clear them change a map.. hopefully this new x-pipe is the solution i am looking for...
	Appreciate 0 Quote

08-16-2007, 08:58 PM	#19
1clean335i Perf BMW mag issue 147, 159 432 Rep 6,799 Posts Drives: Project Estoril Join Date: Feb 2007 Location: Miami, FL iTrader: (31) Garage List 2013 335i M-sport [0.00] 2011 X5 xdrive35i M ... [0.00] 2009 335i M-sport [0.00] 07' 335i Sedan [0.00]	nice! Hope to see you at the cookout next weekend! __________________ '13 Estoril Blue 335i M-sport *Don't PM me!* Message me here- http://www.facebook.com/ProjectEstoril
	Appreciate 0 Quote

08-17-2007, 12:05 AM	#21
Evo8MRto335I Captain 40 Rep 983 Posts Drives: can't list them all Join Date: Feb 2007 Location: Tucson iTrader: (1)	I received my cat downpipes today and I can say they are light as hell. The cats are tiny, I thought that both downpipes would be heavy but they are extremelly light in weight. I haven't put them in yet but I am planning on perhaps this weekend. I would let you guys know how the installation goes (if I do it).
	Appreciate 0 Quote