[Eric335]

Hey E9XPost,

I was just wondering where you consider the optimal mounting position for a 9500ix to be. Ive always read that the higher up the unit is, the better? Not sure if thats true? I was just going to place it right under the rear-view mirror.

Any advice on where to place it is appreciated, i got the unit for christmas! Post pictures of your setup

E

[passing]

when i had mine, it was hardwired right to the fuse box. i tapped the homelink fuse.

i placed it just to the left of the rear view mirror.

[silvergray545]

Mount high. I had mine mounted to the left of the rear view mirror as well.

[upstatedoc]

What's a 9500ix?

[upstatedoc]

Originally Posted by passing

when i had mine, it was hardwired right to the fuse box. i tapped the homelink fuse.

i placed it just to the left of the rear view mirror.

Now you do car ins. Right?

Do agents give a fuck if their customers run RD s and/or laser jammers?

[M_Six]

I have my 8500 X50 mounted just above the left side of the rearview mirror so that the mirror helps support it. It's hard wired into the Homelink wiring right by the mirror.

[eamon]

I placed mine to the "right" of the rear-view, it's rather inconspicuous.
This way in the rare chance that I am pulled over cops won't see it as they walk up to my door. Not that it's illegal to have one, but I'd rather not have a cop judge me and base whether giving me a ticket or not on the fact that I have a radar and was trying to avoid authorities.

[passing]

Originally Posted by upstatedoc

Now you do car ins. Right?

Do agents give a fuck if their customers run RD s and/or laser jammers?

i could care less. its got nothing to do with me.. not covered under a PAP anyways.

[persian54]

Originally Posted by eamon

I placed mine to the "right" of the rear-view, it's rather inconspicuous.
This way in the rare chance that I am pulled over cops won't see it as they walk up to my door. Not that it's illegal to have one, but I'd rather not have a cop judge me and base whether giving me a ticket or not on the fact that I have a radar and was trying to avoid authorities.

I put mine by the left so I can put my visor down to block it

if it's on the right with a visor down... that would be weird (unless you always have a passenger)

Mine is hardwired through the interior light and i have it on the left by the mirror

[eamon]

Originally Posted by persian54

I put mine by the left so I can put my visor down to block it

if it's on the right with a visor down... that would be weird (unless you always have a passenger)

Mine is hardwired through the interior light and i have it on the left by the mirror

Don't need to use the visor, the rear view mirror and the angling position blocks it entirely from the view through the driver window.
I may post pics later

[WilliamS]

Blend mount

[Eric335]

Originally Posted by persian54

I put mine by the left so I can put my visor down to block it

if it's on the right with a visor down... that would be weird (unless you always have a passenger)

Mine is hardwired through the interior light and i have it on the left by the mirror

Hmmm Id love to see pictures of this. I wasnt going to hardwire it since i was going to unplug it and throw it in the passenger wheel well if i ever got pulled over, but now that i think of it, the wiring can be unplugged itself....

Originally Posted by eamon

Don't need to use the visor, the rear view mirror and the angling position blocks it entirely from the view through the driver window.
I may post pics later

Id love to see pictures of this as well. Hardwired, right?




Did you all buy the hardwiring kit from Escort? How hard was it to located the power/ground?

[Eric335]

Originally Posted by upstatedoc

What's a 9500ix?

As a countermeasure enthusiast, what would you recommend? Hardwired? No hardwire and keep the SmartCord with mute button? Left/right/low/high?

[ChuckBMW3]

I have my 8500 mounted low, almost touching the dash. I've thought about placing it up higher as most of you recommend, but I worry that the suction cups will fail (which they often do during the summer months) and it will fall down and either mess up the radar or my dash/center console/etc.

[Eric335]

Originally Posted by ChuckBMW3

I have my 8500 mounted low, almost touching the dash. I've thought about placing it up higher as most of you recommend, but I worry that the suction cups will fail (which they often do during the summer months) and it will fall down and either mess up the radar or my dash/center console/etc.

Interesting, ill have to see if that happens to me (im in Fl as well).

[M_Six]

Originally Posted by ChuckBMW3

I have my 8500 mounted low, almost touching the dash. I've thought about placing it up higher as most of you recommend, but I worry that the suction cups will fail (which they often do during the summer months) and it will fall down and either mess up the radar or my dash/center console/etc.

That happens. That's why I have mine partially resting on the RVM. The mirror supports it and if one suction cup comes loose the detector just sort of shifts a bit and I have time to fix it before it falls.

I wired mine like this.

http://www.bmwm3.org/diy_valentine_v1.shtml

That's for a V1, but the steps are the same except the X50 just clamps onto the power lead directly. You'll see when you get to Steps 6 and 7.

[carve]

Ditto. Left of rearview mirror. I have it hardwired into the fuse box. I took the A-pillar cover off, had it run next to the airbag, along the headliner, and it's between the visor and mirror. It has an unobstructed view, it's easy to see and hear, and a cop poking his head in the car probably won't notice it. The smartcord button sticks out of the console just by my right knee, so I can tap it with my knee if it's making noise.

[persian54]

mine has come off the suction cups in the past, but i have made the hardwire wire very snug so it just tangles. doesn't hit anything.

[Class-of-2016]

High up is best because it provides a clear line of sight to both front and rear sensors of the 9500ix. Mine is mounted (when looking at rear view mirror), to the right hand side of mirror and right above it. The radar almost touches the roof lining.

The radar is hardwired by the "Fuse Tap" method via Fuse Box in the glove compartment. There are many posts on "Hardwire/Fusetap" for radars on the forum.

[upstatedoc]

Originally Posted by Eric335

As a countermeasure enthusiast, what would you recommend? Hardwired? No hardwire and keep the SmartCord with mute button? Left/right/low/high?

Definitely hardwire and mount to the left of RVM. I've got a non metallic tint strip hiding it from the front and my visor will block view from rear if I desire. Ive got the remote mute button mounted near the coin tray

[Eric335]

Originally Posted by upstatedoc

Definitely hardwire and mount to the left of RVM. I've got a non metallic tint strip hiding it from the front and my visor will block view from rear if I desire. Ive got the remote mute button mounted near the coin tray

Interesting, ill have to try this. Plus, you can always just pop it off the quick-mount and unplug it before you pull over. When i get pulled over i take off my expensive watch and sunglasses because...well, you know. Dont wana look like i can afford that ticket

And the remote mute button, is this the SmartCord your talking about? The SmartCord has to plugged into the cigarette socket i thought?


Also, above,below, or aligned with the RVM?

[skinrock]

Originally Posted by Goofyguy

Blend mount

+1

I bought this shortly before selling my car, easily the best mounting option. Run the hardwire kit through the mirror housing to the sunroof module and you have a very clean setup.