oil leak

amr_e90 · 02-02-2013, 08:14 PM

what's up felllas , so its come too the point when my car has been killing me with little annoying problems here and there ok lemme explain. its a 07 three thirty five ex eye with 80k . I just replaced the valve cover gasket which was a pain with all the wires and non sense design in the way and torque every single bolt to spec. parked the car for 30 mins and then move it and find a little puddle of oil under the car . when lifting the car and looking underneath the whole bottom engine cover is oil and its scary I check the oil level everyday as I'm scared and worried. does this engine have any oil pan gasket problems has any of you had them fail I know about the oil filter housing gasket I'm gonna replace that next just need time , what do you guys think , ask questions and I will respond looking for help

Ovitrix335 · 02-02-2013, 08:22 PM

You might have to change the oil pan gasket and oil housing gasket. I've read that many people with higher miles have problems with both of them. So take some time and do both and you should be good. To change the oil pan gasket is a pita

amr_e90 · 02-02-2013, 08:43 PM

Quote:

Originally Posted by Ovitrix335

You might have to change the oil pan gasket and oil housing gasket. I've read that many people with higher miles have problems with both of them. So take some time and do both and you should be good. To change the oil pan gasket is a pita

yea especially on xdrive cars but iv dropped the subframe for my dp install and its like 15 mins

amr_e90 · 02-02-2013, 08:43 PM

Quote:

Originally Posted by Ovitrix335

You might have to change the oil pan gasket and oil housing gasket. I've read that many people with higher miles have problems with both of them. So take some time and do both and you should be good. To change the oil pan gasket is a pita

yea especially on xdrive cars but iv dropped the subframe for my dp install and its like 15 mins

BMWN54tech · 02-03-2013, 09:56 AM

Quote:

Originally Posted by amr_e90

Quote:

Originally Posted by Ovitrix335

You might have to change the oil pan gasket and oil housing gasket. I've read that many people with higher miles have problems with both of them. So take some time and do both and you should be good. To change the oil pan gasket is a pita

yea especially on xdrive cars but iv dropped the subframe for my dp install and its like 15 mins

Rule of thumb, start from the top. Did you roll the gasket accidentally? Check with a mirror. First gasket I would do is the oil filter housing. When it leaks it leaks onto the lip of the oil pan gasket and goes everywhere.

BMWM.D. · 02-03-2013, 12:32 PM

Quote:

Originally Posted by BMWN54tech

Rule of thumb, start from the top. Did you roll the gasket accidentally? Check with a mirror. First gasket I would do is the oil filter housing. When it leaks it leaks onto the lip of the oil pan gasket and goes everywhere.

Yep, you beat me to it.

I guess the question is this: was the big puddle present before you did the valve cover job? If not, it's pretty damn likely the valve cover gasket came unseated. And like N54tech said, the oil filter housing is by FAR the most common oil leak on these engines.

amr_e90 · 02-04-2013, 08:28 AM

Quote:

Originally Posted by BMWM.D.

Quote:

Originally Posted by BMWN54tech

Rule of thumb, start from the top. Did you roll the gasket accidentally? Check with a mirror. First gasket I would do is the oil filter housing. When it leaks it leaks onto the lip of the oil pan gasket and goes everywhere.

Yep, you beat me to it.

I guess the question is this: was the big puddle present before you did the valve cover job? If not, it's pretty damn likely the valve cover gasket came unseated. And like N54tech said, the oil filter housing is by FAR the most common oil leak on these engines.

but if the gasket came unseated or off its track the valve cover itself would not sit or tighten normally right ?

CoralRed335XI · 02-04-2013, 04:15 PM

Wipe off all oil and see if it's still leaking. May just be remnance from the valve cover gasket leak. Can't hurt to cross your fingers either

BMWN54tech · 02-04-2013, 04:43 PM

Quote:

Originally Posted by amr_e90

but if the gasket came unseated or off its track the valve cover itself would not sit or tighten normally right ?

If its rolled inbetween the bolt holes it will tighten and fit just like normal. Take a mirror and check.

JRS_335I · 02-18-2013, 10:22 AM

Quote:

Originally Posted by amr_e90

what's up felllas , so its come too the point when my car has been killing me with little annoying problems here and there ok lemme explain. its a 07 three thirty five ex eye with 80k . I just replaced the valve cover gasket which was a pain with all the wires and non sense design in the way and torque every single bolt to spec. parked the car for 30 mins and then move it and find a little puddle of oil under the car . when lifting the car and looking underneath the whole bottom engine cover is oil and its scary I check the oil level everyday as I'm scared and worried. does this engine have any oil pan gasket problems has any of you had them fail I know about the oil filter housing gasket I'm gonna replace that next just need time , what do you guys think , ask questions and I will respond looking for help

I'm on the same boat. But I changed the oil filter housing gasket, oil pan gasket, and valve cover gasket 3 days ago and still have the same amount of oil under the car or more. Leaking like a quart of oil per week. This oil leak is driving me insane.

BostonBeemah · 02-19-2013, 11:20 PM

crank pulley and seal only thing left....

Bimmer305 · 02-20-2013, 08:33 AM

You guys may want to check oil lines that connect to your turbos (gasket).
I putting in a quarter every ~1k miles and everything points to rear turbo oil line gasket.

02-02-2013, 08:14 PM	#1
amr_e90 Captain 212 Rep 802 Posts Drives: e90 335xi 6mt Join Date: Apr 2012 Location: boston,Ma iTrader: (2)	oil leak what's up felllas , so its come too the point when my car has been killing me with little annoying problems here and there ok lemme explain. its a 07 three thirty five ex eye with 80k . I just replaced the valve cover gasket which was a pain with all the wires and non sense design in the way and torque every single bolt to spec. parked the car for 30 mins and then move it and find a little puddle of oil under the car . when lifting the car and looking underneath the whole bottom engine cover is oil and its scary I check the oil level everyday as I'm scared and worried. does this engine have any oil pan gasket problems has any of you had them fail I know about the oil filter housing gasket I'm gonna replace that next just need time , what do you guys think , ask questions and I will respond looking for help __________________ 14 M5 / comp / CCBs / alpine white PG intakes Evolve tune Switzer exhaust Fabworx pipes
	Appreciate 0 Tweet Quote

02-02-2013, 08:22 PM	#2
Ovitrix335 Second Lieutenant 7 Rep 229 Posts Drives: Bmw 335i Join Date: Aug 2011 Location: Michigan iTrader: (11)	You might have to change the oil pan gasket and oil housing gasket. I've read that many people with higher miles have problems with both of them. So take some time and do both and you should be good. To change the oil pan gasket is a pita Last edited by Ovitrix335; 02-02-2013 at 08:34 PM..
	Appreciate 0 Quote

02-04-2013, 04:15 PM	#8
CoralRed335XI Captain 103 Rep 646 Posts Drives: 2008 E92 335XI Coupe Join Date: Aug 2011 Location: NJ,VA iTrader: (4) Garage List 2008 BMW 335XI [3.66]	Wipe off all oil and see if it's still leaking. May just be remnance from the valve cover gasket leak. Can't hurt to cross your fingers either __________________ 2008 E92 335XI, Space Gray on Coral/Fox Red Hybrid M3 seats, Premium, Cold Weather, Comfort Access, iPod. Mods: Fox Red M3 seats up front, KW V1, ER CP + TIAL BOV.
	Appreciate 0 Quote

02-19-2013, 11:20 PM	#11
BostonBeemah Lieutenant 75 Rep 524 Posts Drives: AW 135i 6spd Join Date: Sep 2011 Location: Belmont, Ma iTrader: (4)	crank pulley and seal only thing left.... __________________ 2010 AW/BLK 135i VM 6465 Single Turbo, JB4 + MHD, VRSF CP & Tial, Big Tom, Fuel-It PI + Stage 3 + Return + Ethanol Sensor, BMW PE, MFactory LSD, Spec 3+ & MFactory SMFW, RB External PCV Best stock turbo 12.5 @ 19.46 spinning all the way down RIP 2008 AW/BL 135i
	Appreciate 0 Quote

02-20-2013, 08:33 AM	#12
Bimmer305 Second Lieutenant 35 Rep 288 Posts Drives: E92 335i Join Date: Jun 2012 Location: Miami iTrader: (2)	You guys may want to check oil lines that connect to your turbos (gasket). I putting in a quarter every ~1k miles and everything points to rear turbo oil line gasket. __________________ Cobb / DCI / VRSF Downpipes / VRSF 7" Intercooler / Walbro LPFP / E85
	Appreciate 0 Quote