[Runner87]

Hi all!
Please someone, can show underbody pictures of e92 330i and e92 335i?
Me interest distinctions exhaust between coupes 335 and 330.
Whether probably to make the doubled exhaust, as on 335, but similar as on 335, not as propose eisenmann - It is a deceit.
PS: sorry for my bad english

[Chesmu]

1. Is there a e92 330i available in Ukraine... cuz we don't have one in the US.

The major underbody distinction between the biturbo and the non-turbo cars is the factory routing of the exhaust. To accomodate the twin exhaust of the biturbo, and the twin mufflers, the trunk cargo area available in the non-turbo e90 was removed/shrunken.

I presume you have a non-turbo car... which means if you want quad exhaust it will have to be of the type you have pictured, namely the eisenmann. A "335-type" quad exhaust has two mufflers, and that would be impossible to accomodate in teh underbody of a non-turbo car.

here are some pics to demonstrate what I mean:
1st pic: longtran's e92
2nd pic: underbody of an e90. The cricle marks teh storgae area which would block placement of a 2nd muffler.

In short... do an eisenmann type set-up.

[Runner87]

2Chesmu: Thank you very much!

No, unfortunately I have no car It we with friends have dispute, one man has told that it easily to make an exhaust 330 as on 335, but I spoke it, that under the bottom there is no place for the second muffler. So, i'm have won dispute ))

[Chesmu]

If there was a bet involved, I'll expect my share of the winnings soon!

[jasonn]

If you want to get the tips of the 335 to spread out like the eisenmann pictured above, you'll have to do quite a bit of modification to your underbody.

[Chesmu]

Originally Posted by jasonn

If you want to get the tips of the 335 to spread out like the eisenmann pictured above, you'll have to do quite a bit of modification to your underbody.

His question was the otherway around; can a 330 exhaust be modded to look like a 330. Either way, though, your answer is correct.
Would need significant mods.