Sponsored by The Tire Rack

[FrozenM5]

Looking for a nice set of 18's such that I can run a taller sidewalk than with my 19's. rough roads....

18x8 or 8.5 front
18x8.5 - 9.5 rear

Lowered e92 offset

Any suggestions?

[tjnitsche]

Forgestar f14, you can get the 18x10 super deep concave rears.. I am considering a set myself

[OEMconcept]

Most cast brands will have the same amount of concave. The wheel specs are all pretty much the same, so there will never be inches of concave difference. If you want deeper concave you need to run wider wheels, so something like a 18x10 or 10.5 in the rear, but then there aren't many companies that offer that. Forgestar would probably get you the deepest concave since you can get them in wider widths.

[jjellyneck]

Originally Posted by OEMconcept

Most cast brands will have the same amount of concave. The wheel specs are all pretty much the same, so there will never be inches of concave difference. If you want deeper concave you need to run wider wheels, so something like a 18x10 or 10.5 in the rear, but then there aren't many companies that offer that. Forgestar would probably get you the deepest concave since you can get them in wider widths.

Yes but...when you get into that 10 or 10.5 range and run a reasonable width tire (265) then you need to roll the rear fenders, correct?

[FrozenM5]

I've got a 10.5, 265 now and don't need to roll. Could easily run a 275 too.

[jjellyneck]

Nice! What offset are you running?